Microstructure and mechanical properties relations for green bodies compacted from spray dried granules

Alumina granules from three binder systems were spray dried and pressed into bars at varied pressure. Granules are classified as strong, medium and weak as to reflect the different amount of poly(vinyl-butyral) binder and liquid paraffin plasticizer used in the binder system. Mechanical properties of the pressed bars were obtained from a four-point bend test and microstructures were examined using scanning electron microscopy SEM. Strengths and fracture toughnesses are found to increase as a function of compaction pressure, while the calculated effective flaw size is independent of the compaction pressure for all three granule types. Microstructural examination of fracture surfaces revealed that samples compacted at high pressure exhibited more transgranular fracture than samples compacted at low pressure. Evidently, higher pressure had increased the intergranular fracture resistance which correspondingly increased the fracture toughness of the pressed bars. For bars pressed from granules, green body strengths and toughnesses are strongly dependent on the cohesion between pressed granules and not on the effective processing flaw size.     

Squamous cell carcinoma of the penis. III. Treatment of regional lymph nodes

We analyzed the management of regional lymph nodes in 110 patients with squamous cell carcinoma of the penis treated at the Netherlands Cancer Institute between 1956 and 1989 with curative intent. Of 66 patients who presented with unsuspected nodes 57 were placed on a surveillance program, while lymph node dissection was performed in 5 (with adjuvant external radiation therapy in 1) and 4 were treated with external radiation therapy only. The management of 40 patients with clinically suspected nodes included surveillance in 5, lymph node dissection in 27 (with adjuvant radiotherapy in 11), biopsy in 4 and external radiation therapy in 4. Postoperative radiotherapy had been given if more than 2 nodes were involved or when extracapsular growth was observed. Overall, 25 patients had a regional recurrence, 5 of whom could be cured subsequently. All regional recurrences developed within 2 years after primary treatment. Analysis showed 100% survival in histologically proved node negative patients (stage pN0). The success of lymph node dissection was related to the extent of the metastatic spread and to the number of involved nodes. Patients with 1 positive node and unilateral inguinal involvement showed a statistically significant survival advantage compared to patients with more extensive spread. Considering the indications for node dissection we found a clear relationship among T category, grade and the probability of lymph node invasion. Patients with stage T1 tumors and stage T2, grades 1 and 2 tumors presented significantly less often with lymphatic invasion than those with other categories of disease and were less likely to have a regional recurrence after treatment of the primary tumor only. In these categories we recommend surveillance of the regional lymph nodes in patients who present with unsuspected nodes. However, patients with stage T2 grade 3, stage T3 and operable stage T4 tumors should undergo an immediate inguinal node dissection because of the high probability of clinically occult lymph node invasion (in our material more than 50%). With respect to the extent of the node dissection, we found that the likelihood of spread to the contralateral and/or pelvic regions was related to the number of invaded nodes in the inguinal region. We recommend contralateral node dissection and unilateral pelvic node dissection when 2 or more positive nodes are found in the dissected groin specimen. Primary pelvic node dissection should be performed in patients who present initially with cytologically or biopsy proved positive inguinal nodes.(ABSTRACT TRUNCATED AT 400 WORDS)     

Culture and characterization of sinusoidal endothelial cells isolated from human liver

BACKGROUND: Epidemiologic data concerning skin diseases in many rural areas in sub-Saharan Africa are not available. Little is known about the effect of regular treatment schedules by paramedical staff (especially community health workers) in the primary healthcare system on the severity and prevalence of dermatoses. METHODS: 5780 school and pre-school children from 13 primary schools in four sublocations in rural western Kenya (Kisumu District) were examined for dermatoses by the author, together with community health workers in 1993. On-the-spot training and weekend seminars about important and common dermatoses were also given. In 1994 a dermatology program was started within the primary healthcare system. Twelve trained community health workers carried out regular school visits once a week and diagnosed and treated pupils with dermatoses. Treatment was performed with gentian violet 1% solution for bacterial skin infections, Whitfield's ointment for dermatophytoses, benzylbenzoate emulsion 25% for scabies, and hydrocortisone acetate 1% cream for eczemas. All schools were visited again in 1995 to evaluate the long-term effects of the program. RESULTS: In 1993, the prevalence rate for dermatoses was 32.4%. Most of the skin diseases found were of infective origin (27.1% were caused by bacteria, 21.6% by fungi, and 17.6% by arthropods, mainly scabies mites). Dermatitis accounted for 3.5%. In 1995, the prevalence of dermatoses declined to 29.6% (p<0.05), and this reduction was most strongly observed for tropical ulcers and tinea capitis. Additionally, there was an improvement in the extent and severity of skin diseases. CONCLUSIONS: This study defines, for the first time, the number and extent of skin diseases in children in rural Kisumu District; most dermatoses were of infective origin. The study demonstrates that community health workers in the primary healthcare system are capable of dealing successfully with the most common dermatoses in children following a short training period.     

The effect of Pseudomonas aeruginosa infection on clinical parameters in steady-state bronchiectasis

STUDY OBJECTIVE: To investigate the effect of Pseudomonas aeruginosa infection on clinical parameters in Chinese patients with noncystic fibrosis and steady-state bronchiectasis. DESIGN: Prospective, cross-sectional clinicomicrobiological study with informed consent. SETTING: Consecutive outpatient recruitment from a specialist bronchiectasis respiratory clinic. PATIENTS: Outpatients (n = 100; 62 women; 55.1+/-16.7 years old; FEV1/FVC 1.4+/-0.7/2.1+/-0.9 L), who had stable respiratory symptoms for more than 3 weeks. MEASUREMENTS AND RESULTS: Respiratory pathogens isolated from the sputum were: Pseudomonas aeruginosa (33), Haemophilus influenzae (10), Moraxella catarrhalis (2), other Gram-negative bacilli (5), Streptococcus pneumoniae (6), Staphylococcus aureus (5), mycobacteria (3), and yeast (1). Clinical parameters in patients with positive isolation of P aeruginosa were compared with those without the organism in the sputum culture (non-P aeruginosa). In the P aeruginosa group, the FEV1/FVC ratio and sputum volume were lower (p < 0.005) and higher (p < 0.0001), respectively, than those of the non-P aeruginosa group. The FEV1/FVC ratio (< 60%) and sputum volume (grading > 5) were independently associated with a positive sputum isolation of P aeruginosa with odds ratios of 3.1 (confidence interval [CI] 1.2 to 8.4; p < 0.01) and 4.7 (CI 1.6 to 13.3; p < 0.001), respectively. CONCLUSIONS: P aeruginosa is the predominant respiratory pathogen isolated in the sputum of Chinese patients with steady-state bronchiectasis, and its isolation is associated with high sputum output (> or = 75th quartile) and moderately severe airflow obstruction (FEV1/FVC < 60%).     

Characterization and screening for mutations of the growth arrest-specific 11 (GAS11) and C16orf3 genes at 16q24.3 in breast cancer

BACKGROUND: Both fibroblast-mediated cytokine gene therapy and bone marrow transplantation (BMT) have proven to be efficient protocols for the recovery of bone marrow depression. In this report, the effects of fibroblast-mediated interleukin (IL)-6 gene therapy, in combination with BMT, on the recovery of irradiation-induced bone marrow depression were investigated. METHODS: NIH3T3 fibroblast cells engineered to secrete IL-6 (NIH3T3-IL-6) or NIH3T3 cells transduced with the neomycin gene (NIH3T3-Neo), in combination with 10(7), 10(6), or 10(5) syngeneic bone marrow cells, were implanted into irradiated mice. RESULTS: The platelets and white blood cells in the peripheral blood of the irradiated mice increased greatly 12 days after implantation of NIH3T3-IL-6 cells and BMT, the white blood cell counts were restored to a normal level 32 days after the combined therapy, and the platelet number was obviously higher than that in mice implanted with NIH3T3-Neo and BMT. Twenty and 25 days after the combined therapy, the mice showed accelerated recovery of colony-forming unit (CFU)-granulocyte/macrophages and CFU-megakaryocytes when compared with the mice implanted with NIH3T3-Neo cells and BMT. Ten days after lethal irradiation with gamma rays, the spleens formed more CFU-spleen in mice implanted with NIH3T3-IL-6 cells and BMT than in mice injected with phosphate-buffered saline or NIH3T3-Neo cells. Combined therapy with NIH3T3-IL-6 cell implantation and BMT delayed the survival period of the hematopoietic-depressed mice significantly when compared with therapy with NIH3T3-Neo cell implantation and BMT. CONCLUSIONS: These data demonstrated that the combined therapy of fibroblast-mediated IL-6 gene therapy and BMT could significantly promote the recovery of irradiation-induced hematopoietic depression.     

Delaminations at the free edge of a composite laminate

The concept of a fracture process zone where damage takes place is used to analyse the delaminations at the free edges of angle ply laminates under uniaxial tension. The use of a fracture process zone removes the singularity in the interlaminar stresses and enables the initiation and growth of delaminations to be modelled for a perfect laminate without any assumed prior defects. Two different models for the stress displacement relationship in the fracture process zone are examined: a constant stress up to critical displacement and a linear relationship. Finite element analysis shows that there is little difference in the predictions obtained from the two models. An approximate analysis is presented for the constant stress stress-displacement model which is shown to agree with a finite element solution and experimental data. Hence it is argued that the approximate method using a constant stress model for the fracture process zone is sufficient for accurate prediction of delaminations.     

Positive state‐bounding observer for positive interval continuous‐time systems with time delay

This paper is concerned with the problem of positive observer synthesis for positive systems with both interval parameter uncertainties and time delay. Conventional observers may no longer be applicable for such kind of systems due to the positivity constraint on the observers, and they only provide an estimate of the system state in an asymptotic way. A pair of positive observers with state‐bounding feature is proposed to estimate the state of positive systems at all times in this paper. A necessary and sufficient condition for the existence of desired observers is first established, and the observer matrices can be obtained easily through the solutions of a set of linear matrix inequalities (LMIs). Then, to reduce the error signal between the system state and its estimates, an iterative LMI algorithm is developed to compute the optimized state‐bounding observer matrices. Finally, a numerical example is presented to show the effectiveness and applicability of the theoretical results. Copyright © 2011 John Wiley & Sons, Ltd.     

Fast full‐color reflective display via photoluminescent enhancement

Reflective displays are advantageous in applications requiring low power or daylight readability. However, there are no low‐cost reflective technologies capable of displaying bright colors. By employing photoluminescence to more efficiently use ambient light, we created a prototype display that provides bright, full color in a simple, low‐cost architecture. This prototype includes a novel electrokinetic shutter, a layer that incorporates patterned luminescent red, green, and blue sub‐pixel elements, and a novel optical out‐coupling scheme. The luminescent elements convert otherwise‐wasted portions of the incident spectrum to light in the desired color band, resulting in improved color saturation and lightness. This prototype provides a color gamut that is superior to competing reflective display technologies that utilize color filters in single‐layer side‐by‐side sub‐pixel architectures. The current prototype is capable of switching in <0.5 s; future displays based on an alternative electro‐optic shutter technology should achieve video rate operation. A transflective version of this technology has also been prototyped. The transflective version utilizes its backlight with a power efficiency that is at least three times that of a conventional liquid crystal display. These photoluminescence‐based technologies enable a host of applications ranging from low‐power mobile products and retail pricing signage to daylight readable signage for outdoor advertising segments.