Assessment of response function in two PET scanners with and without interplane septa

The authors have assessed the response function both experimentally and theoretically for two commercial tomographs: CTI 931/08-12 and CTI 953B with and without interplane septa. Monte Carlo simulations were undertaken using the GEANT package from CERN. Spatial resolution (tomographic and axial) was calculated for line sources at various positions in the field of view. Sensitivity and scatter fraction (SF) were calculated for various source geometries as a function of energy discrimination. A very realistic response function in positron emission tomography (PET) is obtained by Monte Carlo methods, using global parameters to account for unsimulated phenomena such as scintillation light transport inside a detector block and its sharing among the various phototubes. Minor discrepancies remain for sensitivity and SF at high energy thresholds and may probably be explained by introducing the observed dispersion in the energy response for the various crystals within a detector block.     

Noise equivalent count measurements in a neuro-PET scanner with retractable septa

The noise-equivalent count-rate (NEC) performance of a neuro-positron emission tomography (PET) scanner has been determined with and without interplane septa on uniform cylindrical phantoms of differing radii and in human studies to assess the optimum count rate conditions that realize the maximum gain. In the brain, the effective gain in NEC performance for three-dimensions (3-D) ranges from >5 at low count rates to approximately 3.3 at 200 kcps (equivalent to 37 kcps in 2-D). The gains of the 3-D method assessed by this analysis are significant, and are shown to be highly dependent on count rate and object dimensions.     

DB2 Universal Database: A Case Study of a Successful User-Centered Design Program

This case study describes the application of user-centered design (UCD) principles to the development of a complex middleware software product-IBM's DB2(r) Universal Database. Motivated by trade press reviews highlighting ease-of-use problems, a multisite development team utilized IBM UCD to transform ease of use into a featured product attribute. This case study describes the initial application of UCD to DB21 and the positive business results that followed: critical acclaim, increased marketshare and user satisfaction, and increased support and adoption of UCD across the IBM database product family. Although ease-of-use objectives, target markets, and human factors practitioners' roles have evolved over 6 years and multiple versions of the product, DB2 continues to achieve positive results with UCD. In addition to the flexibility of the UCD methodology, other factors that influenced DB2's success included management support, resource commitment, cross-site communication and collaboration, detailed product specifications, and a focus on supporting user tasks.     

Tribological assessment of a flexible carbon-fibre-reinforced poly(ether-ether-ketone) acetabular cup articulating against an alumina femoral head

New material combinations have been introduced as the bearing surfaces of hip prostheses in an attempt to prolong their life by overcoming the problems of failure due to wear-particle-induced osteolysis. This will hopefully reduce the need for revision surgery. The study detailed here used a hip simulator to assess the volumetric wear rates of large-diameter carbon-fibre-reinforced pitch-based poly(ether-ether-ketone) (CFR-PEEK) acetabular cups articulating against alumina femoral heads. The joints were tested for 25 x 10(6) cycles. Friction tests were also performed on these joints to determine the lubrication regime under which they operate. The average volumetric wear rate of the CFR-PEEK acetabular component of 54 mm diameter was 1.16 mm(3)/10(6) cycles, compared with 38.6 mm(3)/10(6) cycles for an ultra-high-molecular-weight polyethylene acetabular component of 28 mm diameter worn against a ceramic head. This extremely low wear rate was sustained over 25 x 10(6) cycles (the equivalent of up to approximately 25 years in vivo). The frictional studies showed that the joints worked under the mixed-boundary lubrication regime. The low wear produced by these joints showed that this novel joint couple offers low wear rates and therefore may be an alternative material choice for the reduction of osteolysis.     

Thermal stability of the αZn–Mg2Zn11 and αZn–βAl eutectics obtained by Bridgman growth

The thermal stability of rod-like Zn–Mg2Zn11 and lamellar Zn–Al eutectics obtained by Bridgman growth of Zn–3.1 wt% Mg and Zn–5 wt% Al has been studied for soaking times up to 10 h at 300 and 350°C, respectively. Two-dimensional coarsening resulted for Zn–Mg2Zn11 grown at 0.5 and 1 mm s-1 while fault migration was operative for lamellar Zn–Al grown at 0.1 and 1 mm s-1. Hardness decreased with increased soaking time according to a Hall–Petch relationship with mean interphase spacing and the values H0 and kY accord well with the values obtained from the Hall–Petch relationship for HV of as-solidified Zn–Mg2Zn11 and Zn–Al with eutectic interphase spacing, respectively. © 1998 Chapman & Hall     

On the elastic modulus degradation in continuum damage mechanics

To measure accurately the elastic modulus of a metal, E, can be a difficult task when a specimen undergoes plastic strains. Moreover, some failure criteria, such as those associated with Continuum Damage Mechanics, require the change of elastic modulus with strain to define a measure of damage, D, in a material or structure. Thus, it is important to assess the possible geometrical influence of a specimen on the measurement of the elastic modulus at different deformation levels. It is shown in this article, with the aid of a numerical simulation, that any plastic strains induce important geometrical effects in the evaluation of E, which have a significant influence on the evaluation of the scalar damage parameter, D.     

Local Dynamic Stability Assessment of Motion Impaired Elderly Using Electronic Textile Pants

A clear association has been demonstrated between gait stability and falls in the elderly. Integration of wearable computing and human dynamic stability measures into home automation systems may help differentiate fall-prone individuals in a residential environment. The objective of the current study was to evaluate the capability of a pair of electronic textile (e-textile) pants system to assess local dynamic stability and to differentiate motion-impaired elderly from their healthy counterparts. A pair of e-textile pants comprised of numerous e-TAGs at locations corresponding to lower extremity joints was developed to collect acceleration, angular velocity and piezoelectric data. Four motion-impaired elderly together with nine healthy individuals (both young and old) participated in treadmill walking with a motion capture system simultaneously collecting kinematic data. Local dynamic stability, characterized by maximum Lyapunov exponent, was computed based on vertical acceleration and angular velocity at lower extremity joints for the measurements from both e-textile and motion capture systems. Results indicated that the motion-impaired elderly had significantly higher maximum Lyapunov exponents (computed from vertical acceleration data) than healthy individuals at the right ankle and hip joints. In addition, maximum Lyapunov exponents assessed by the motion capture system were found to be significantly higher than those assessed by the e-textile system. Despite the difference between these measurement techniques, attaching accelerometers at the ankle and hip joints was shown to be an effective sensor configuration. It was concluded that the e-textile pants system, via dynamic stability assessment, has the potential to identify motion-impaired elderly.