Particle Size of Whole Meal Rye Bread does not Affect the Digestibility of Macro-Nutrients and Non-Starch Polysaccharides and the Energy Value of Dietary Fibre in Humans

The effect of particle size of whole meal rye bread on the apparent digestibility of macro-nutrients, non-starch polysaccharides (NSP) and energy, the energy value of rye NSP and on faecal weight was studied in balance experiments in seven young women. The whole meal breads were prepared from one single batch of rye milled to two different particle sizes (coarse bread: 50% of particles >2 mm, 90% >1 mm; fine bread: 86% of particles <0·5 mm, 58% <0·2 mm). Two diets containing either coarse (350 g day⁻¹) or fine (377 g day⁻¹) whole meal bread and a low fibre control diet were consumed for 3 weeks each in a 3×3 cross-over design. Relative to the low fibre control diet, digestibility of protein, NSP and energy was significantly lower for the diets containing the whole meal breads. Digestibility of fat was the same for all diets. Partial digestible energy value for each g of NSP from coarse and fine whole meal rye bread was calculated to be −3±7 and 1±5 kJ, respectively. There were no differences between coarse and fine whole meal rye bread in the effects on the parameters measured with the exception on faecal wet weight, which was higher for the coarse bread diet.     

Sequencing analysis of a 40·2 kb fragment of yeast chromosome X reveals 19 open reading frames including URA2 (5′ end), TRK1, PBS2, SPT10, GCD14, RPE1, PHO86, NCA3, ASF1, CCT7, GZF3, two tRNA genes,three remnant delta elements and a Ty4 transposon

The complete sequence of a 40 247 bp DNA segment located on the left arm of chromosome X of Saccharomyces cerevisiae has been determined and analysed. The sequence encodes the 5′ coding region of the URA2 gene and 18 open reading frames of at least 100 amino acids. Ten of these correspond to known genes, whereas eight correspond to new genes. In addition, the sequence contains a tRNA-Ala gene, a tRNA-Asp gene, a Ty4 transposable element and three delta elements. The sequence has been deposited in the EMBL databank under Accession Numbers: Z49405, Z49404, Z49403, Z49402, Z49401, Z49400, Z49399, Z49398, Z49397, Z49396, Z49394, Z49392, Z49391, Z49390, Z49389, Z49387, Z49386, Z49385.     

Effect of cure temperature on the structure and water absorption of epoxy/amine thermosets

Dielectric and rheological measurements are reported on the effect of cure temperature on the water absorption of tris[(2,3-epoxypropoxy)phenyl] methane cured with a 1 : 1 stoichiometric ratio of 4,4′-diaminodiphenylsulphone. Analysis of the water absorption characteristics of these materials using a combination of dielectric and gravimetric measurements has indicated that water molecules can be found in two distinctly different types of environments. There are water molecules which are strongly interacting with polar groups and water molecules clustered together into sub-micro-scale cavities within the matrix structure. Changes in the final cure temperature have the effect of changing both the extent and distribution of the types of water molecules present in the matrix. Validation of the diffusion coefficients obtained from the dielectric analysis is based on a comparison with gravimetric data and the implications are discussed. Differences observed between these two different types of measurement are related to peculiarity in the dielectric method and its extreme sensitivity to interfacial phenomena.     

Comparative X-ray scattering,microscopical, and mechanical studies on rectangular plates injection molded from different types of isotactic polypropylene

Rectangular plates were injection molded from two grades of commercial polypropylene (PP) differing in the molar mass distribution. The mold was mechanically sealed when a desired pressure p_i,max (up to 1560 bar) was reached. Samples were taken from each plate at different distances from the gate and were investigated by applying various methods. In spatially resolved wide-angle X-ray studies, the cross section of the sample was scanned with a fine X-ray beam (collimated by a Kratky small-angle camera) and the intensity of scattering was registered by a linear detector as a function of position in the cross section. The evaluation of the scattering data delivered profiles of several parameters, describing the distribution of crystallite modification β-PP and γ-PP, the degree of orientation, the size of crystallites, and interplanar spacing, depending on the distance from surface. These results and those from measurements of birefringence and elongation at break, and from polarization microscopy and transmission electron microscopy, provided details of the layered structures in the plates, at different flow lengths, and allowed far-reaching statements about the influence of molecular properties and processing conditions on the development of texture in the plates.     

Development and characterization of inks for screen printing of glass solders for SOFCs

Glass ceramics are supposed to produce stable sealants between ceramic electrolyte and ferritic steel in planar SOFC stacks. The screen printing method is a suitable industrial process in order to produce layers with tailored height and width reproducibly. An appropriate suspension was developed for this application and improved by adjusting the additive composition. This study investigates the rheological behavior of screen printing inks and the corresponding topography of the printed layers. Rotary measurements were carried out to analyse the impact of shear rates on viscosity showing shear thinning behavior. In addition, oscillatory rheometry is performed to gain information about the viscoelastic properties of the slurries and to understand the internal structure of the developed inks. The viscoelasticity and the recovery behavior after shear loading are crucial for the topography of printed films. The principal investigations are executed on solvent-based suspensions, whereby the knowledge gained is used for a transfer to water-based systems allowing a more environmentally friendly handling.     

SOAT1: A Suitable Target for Therapy in High-Grade Astrocytic Glioma?

Targeting molecular alterations as an effective treatment for isocitrate dehydrogenase-wildtype glioblastoma (GBM) patients has not yet been established. Sterol-O-Acyl Transferase 1 (SOAT1), a key enzyme in the conversion of endoplasmic reticulum cholesterol to esters for storage in lipid droplets (LD), serves as a target for the orphan drug mitotane to treat adrenocortical carcinoma. Inhibition of SOAT1 also suppresses GBM growth. Here, we refined SOAT1-expression in GBM and IDH-mutant astrocytoma, CNS WHO grade 4 (HGA), and assessed the distribution of LD in these tumors. Twenty-seven GBM and three HGA specimens were evaluated by multiple GFAP, Iba1, IDH1 R132H, and SOAT1 immunofluorescence labeling as well as Oil Red O staining. To a small extent SOAT1 was expressed by tumor cells in both tumor entities. In contrast, strong expression was observed in glioma-associated macrophages. Triple immunofluorescence labeling revealed, for the first time, evidence for SOAT1 colocalization with Iba1 and IDH1 R132H, respectively. Furthermore, a notable difference in the amount of LD between GBM and HGA was observed. Therefore, SOAT1 suppression might be a therapeutic option to target GBM and HGA growth and invasiveness. In addition, the high expression in cells related to neuroinflammation could be beneficial for a concomitant suppression of protumoral microglia/macrophages.     

A coagulase-negative variant of Staphylococcus aureus from bovine mastitis milk

Bacteriological analysis of milk samples from quarters of a dairy cow suffering from subclinical mastitis yielded two isolates of Staphylococcus aureus which gave a negative reaction in the standard coagulase test. Both isolates were also clumping factor and thermonuclease negative, and gave a negative reaction in the Staphaurex? test. The isolates were identified by using commercial biochemical systems, and by PCR analysis of different staphylococcal cell surface protein and exoprotein genes. Further molecular identification of the isolates, which included sequencing of the 16S rRNA gene and RT-PCR of coagulase (coa), clumping-factor (clfA) and thermonuclease (nuc) genes, was consistent with the diagnosis phenotypically 'coagulase-negative variant of Staph. aureus'. The fact that coagulase-negative Staph. aureus variants can occur in the context of intramammary infections in cattle may result in the incorrect diagnosis 'coagulase-negative staphylococci (CNS)' in routine mastitis diagnostic, at least in rare cases. To fully ensure correct species diagnosis, sequencing of the 16S rRNA gene and amplification of specific genes such as coa is necessary in these cases.     

Air entrapment in sheet molding compounds (SMC)

Entrapped air can commonly lead to large delaminations in thick walled sheet molding compound (SMC) products. In this work different sources of air entrapment in SMC are investigated. The critical process is shown to be the impregnation of the fibers. If no surface active additives are used, large volumes of air may be entrapped in this process, unless the viscosity of the compound is very low. In this situation of poor wetting, the viscosity of the compound during fiber impregnation will critically determine the interlaminar, tensile strength of the product. However, if surface active additives are used, the air escapes entrapment even at relatively high viscosities. The lowering of the viscosity, which is a side effect of the additives, has practically no importance under these conditions of good wetting. Large numbers of small air bubbles are also entrapped during the mixing of the components, but it is shown that these bubbles have very little effect on the mechanical properties of the finished part.     

Fluorous Iminoalditols: A New Family of Glycosidase Inhibitors and Pharmacological Chaperones

A collection of new reversible glycosidase inhibitors of the iminoalditol type featuring N‐substituents containing perfluorinated regions has been prepared for evaluation of physicochemical, biochemical and diagnostic properties. The vast variety of feasible oligofluoro moieties allows for modular approaches to customised structures according to the intended applications, which are influenced by the fluorine content as well as the distance of the fluorous moiety from the ring nitrogen. The first examples, in particular in the D ‐galacto series, exhibited excellent inhibitory activities. A preliminary screen with two human cell lines showed that, at subinhibitory concentrations, they are powerful pharmacological chaperones enhancing the activities of the catalytically handicapped lysosomal D ‐galactosidase mutants associated with GM1 gangliosidosis and Morquio B disease.