Ultralow-voltage boron-doped diamond field emitter vacuum diode

A boron-doped diamond field emitter diode with ultralow turn-on voltage and high emission current is reported. The diamond field emitter diode structure with a built-in cap was fabricated using molds and electrostatic bonding techniques. The emission current versus anode voltage of the capped diamond emitter diode with boron doping, sp² content, and vacuum thermal electric (VTE) treatment shows a very low turn-on voltage of 2 V. A high emission current of 1 μA at an anode voltage of less than 10 V can be obtained from a single diamond tip. The turn-on voltage is significantly lower than comparable silicon field emitters     

Gordon-Haus timing jitter reduction in dispersion-managed solitoncommunications

An analytic theory is presented which demonstrates that the noise induced Gordon-Haus timing jitter in arbitrary dispersion-managed transmission systems is reduced by the power-enhancement factor required to support a dispersion-managed solitons provided the path-average soliton period is much greater than the dispersion-map period. The analysis further predicts the behaviour of the amplitude, width, and quadratic chirp fluctuations due to the amplified spontaneous emission (ASE) noise     

Multiple antibiotic resistance in Stenotrophomonas maltophilia

A cryptic multidrug resistance (MDR) system in Stenotrophomonas maltophilia, the expression of which is selectable by tetracycline, is described. Tetracycline resistance was the consequence of active efflux of the antibiotic, and it was associated with resistance to quinolones and chloramphenicol, but not to aminoglycosides or beta-lactam antibiotics. MDR is linked to the expression of an outer membrane protein (OMP54) both in a model system and in multidrug-resistant clinical isolates.     

Accuracy of using computed tomography to identify pedicle screw placement in cadaveric human lumbar spine

STUDY DESIGN: Utility of using computed tomography to predict pedicle screw misplacement. OBJECTIVE: This study defines the sensitivity and specificity of predicting pedicle screw placement by experienced clinicians using a CT scan image. SUMMARY OF BACKGROUND DATA: In clinical and research settings, the method most commonly used to evaluate pedicle screws placement has been computed tomography. However, no current literature describes the accuracy of this method of evaluating screw placement. METHOD: Cobalt-chrome and titanium alloy pedicle screws of identical size were placed in six cadaveric human lumbar spine. Wide laminectomy was performed to allow complete visualization of the pedicles. Three consecutive lumbar levels were instrumented in each spine, giving 36 pedicle screw placements to identify. The instrumented spines were imaged, and four orthopaedic spine surgeons and a musculoskeletal radiologist were asked to read the images to identify the accuracy of screw placement within the pedicles. RESULTS: The sensitivity rate of identifying a misplaced screw was 67 +/- 6% for cobalt-chrome screws compared with 86 +/- 5% for titanium screws (P < 0.005). The specificity rates of radiographic diagnosis of misplaced pedicle screws were 66 +/- 10% for cobalt-chrome screws and 88 +/- 8% for titanium screws (P < 0.005). Similarly, a statistically significant difference was found in the sensitivity rates of identifying screws placed correctly in the pedicle: 70 +/- 10% for cobalt-chrome screws versus 89 +/- 8% for titanium screws (P < 0.005). Overall accuracy rates were 68 +/- 7% for cobalt chrome screws versus 87 +/- 3% for titanium screws (P < 0.002). CONCLUSION: Reliance on the computed tomography scan data alone in determining accuracy of pedicle screws can lead to inaccuracies in both clinical and research conditions.     

Diversity of pituitary cells in primary cell culture. An immunocytochemical study

A bioassay system for rapid detection of carcinogenic agents has been developed using male Fischer 344 rats to bridge the gap between long-term carcinogenicity tests and short-term screening assays. The system, called the medium-term liver bioassay, is fundamentally based on the 2-stage hypothesis of tumor production, employing initiation by diethylnitrosamine (200 mg/kg, i.p.) in the first stage and test chemical administration during the second, in combination with two-thirds partial hepatectomy. It requires only 8 wk for animal experimentation and a further few weeks for quantitative analysis of immunohistochemically demonstrated glutathione S-transferase placental form positive hepatic foci. A total of 291 chemicals/substances have already been analyzed in our laboratory. Among 63 chemicals that were proved to be carcinogenic in the liver of rat and/or mouse, 57 (90%) gave positive results irrespective of their mutagenicity. Negative compounds include peroxisome proliferators and tamoxifen. Even nonhepatocarcinogens were positive at a rate of 24%. Eighty-six percent (12/14) of mouse liver carcinogens were also positive. On the other hand, only 2 out of 45 noncarcinogens showed very weak positivity. Thus, the efficacy of the system for hepatocarcinogens has been well established. This bioassay is increasingly regarded as an appropriate alternative test for carcinogenicity risk assessment and is practically used for a rapid evaluation of hepatocarcinogenicity of chemicals.     

Periodontal management of gingival overgrowth in the heart transplant patient: a case report

Heart transplant patients take several medications that could affect their periodontal health. Gingival overgrowth associated with cyclosporin (immunosuppressant agent) and nifedipine (calcium channel blocker) is well documented. Candidal infections often develop because of immune suppression. This report describes the clinical and histopathological changes in the gingival tissues of a heart transplant patient and their management. The gingival tissues exhibited pronounced enlargement. The gingivae were lobulated, and the surface of the lobulations was pebbly and granular. Biopsies showed lobules of fibrous connective tissue covered by stratified squamous epithelium. The outer surfaces were dotted with numerous smaller papillations. Candidal hyphae were present in the superficial layers of the epithelium. The extensive papillary lesions appear to be related to candidiasis and constitute a condition which is best designated as papillary stomatitis. Hyperplastic gingival tissues were excised, and the patient was placed on periodic maintenance. One-year postoperative follow-up showed minor gingival growth.     

Genetic mapping of a major susceptibility locus for juvenile myoclonic epilepsy on chromosome 15q

The epilepsies are a group of disorders characterised by recurrent seizures caused by episodes of abnormal neuronal hyperexcitability involving the brain. Up to 60 million people are affected worldwide and genetic factors may contribute to the aetiology in up to 40% of patients. The most common human genetic epilepsies display a complex pattern of inheritance. These are categorised as idiopathic in the absence of detectable structural or metabolic abnormalities. Juvenile myoclonic epilepsy (JME) is a distinctive and common variety of familial idiopathic generalised epilepsy (IGE) with a prevalence of 0.5-1.0 per 1000 and a ratio of sibling risk to population prevalence (lambda(s)) of 42. The molecular genetic basis of these familial idiopathic epilepsies is entirely unknown, but a mutation in the gene CHRNA4, encoding the alpha4 subunit of the neuronal nicotinic acetylcholine receptor (nAChR), was recently identified in a rare Mendelian variety of idiopathic epilepsy. Chromosomal regions harbouring genes for nAChR subunits were therefore tested for linkage to the JME trait in 34 pedigrees. Significant evidence for linkage with heterogeneity was found to polymorphic loci encompassing the region in which the gene encoding the alpha7 subunit of nAChR (CHRNA7) maps on chromosome 15q14 (HLOD = 4.4 at alpha = 0.65; Z(all) = 2.94, P = 0.0005). This major locus contributes to genetic susceptibility to JME in a majority of the families studied.     

Implementing Employee Empowerment

The road to employee empowerment runs between true commitment on the one side and enforced compliance and chaos on the other. By following this column's guidelines, IS managers can steer their organizations to success and help free employees to be more creative in terms of both quality and productivity.     

Chemical mechanical polishing of polymer films

Strategies to reduce capacitance effects associated with shrinking integrated circuit (IC) design rules include incorporating low resistivity metals and insulators with low dielectric values, or “low-κ” materials. Using such materials in current IC fabrication schemes necessitates the development of reliable chemical mechanical polishing (CMP) processes and process consumables tailored for them. Here we present results of CMP experiments performed on FLARE™ 2.0 using a specialized zirconium oxide (ZrO₂) polishing slurry. FLARE™ 2.0 is a poly(arylene) ether from AlliedSignal, Inc. with a nominal dielectric constant of 2.8. In addition, we provide insight into possible removal mechanisms during the CMP of organic polymers by examining the performance of numerous abrasive slurries. Although specific to a limited number of polymers, the authors suggest that the information presented in this paper is relevant to the CMP performance of many polymer dielectric materials.