Radiation tolerance of type IIa synthetic diamond detector for 14 MeV neutrons

Radiation tolerance of a type IIa synthetic diamond detector was examined from irradiation of mono-energetic 14 MeV neutrons. Measurements of I–V (current–voltage) characteristics and energy spectrum for 5.486 MeV alpha particles were performed after neutron irradiation. In the I–V characteristics measurement, enhancement of rectification was observed after neutron irradiation of up to 2.0 × 10¹² n/cm². Concurrently with the enhancement of rectification, significant decrease in signal amplitude was observed in energy spectrum measurement for alpha particles. It is considered that these changes were due to increase in the concentration of defects acting as shallow energy levels in the forbidden band. For neutron irradiation of higher than 1.6 × 10¹³ n/cm², weakening of the rectification characteristics and recovery of the signal amplitude were observed. These changes imply that deep energy levels, which were also considered to be introduced by defects, were dominant and weakened the effects of the shallow energy levels. Increase in the concentration of the deep trapping levels resulted in gradual decrease of the signal amplitude and degradation in the energy resolution. The peak for the alpha particles was obtained up to 5.5 × 10¹³ n/cm².     

A rotating disk electrode study on the ammonia oxidation

The anodic oxidation of ammonia in alkaline solutions was investigated by using rotating disk electrode (RDE) and rotating ring-disk electrode (RRDE) techniques. The ammonia oxidation current on the rotating platinum disk was confirmed not to increase but to decrease with increasing the rotation rate at 25-60 °C. The in situ ring electrode detector gave two kinds of signals for the electroactive species transported from the disk electrode engaged in ammonia oxidation; one can be again reduced and another can further be oxidized on Pt or Ni ring. These results suggested that at least some of the intermediates involved in ammonia oxidation on Pt may not be strongly adsorbed but be detached from the surface regions.     

Deterioration of diacylglycerol‐ and triacylglycerol‐rich oils during frying of potatoes

The stabilities of a commercial diacylglycerol‐rich oil (DAG) and a salad oil (TAG) that had been prepared from a mixture of rapeseed and soybean oils were compared while frying potatoes at 180 °C for 3 h. The representative chemical and physical characteristics of the oils were assessed before and after frying, together with the amount of volatile aldehydes in the exhaust of frying. Among the deterioration indications, the carbonyl value, polymer content, and residual polyunsaturated fatty acid content were similar and not significantly different between the TAG and DAG. On the other hand, the characteristics relating to free fatty acids, i.e. the acid value and emission of chemiluminescence at 100 °C, were greater and the smoke and flash points were lower in the DAG than in the TAG. An irritating odor was generated from the DAG after 1 h of frying and got stronger as frying continued. These results suggested that DAG more easily forms free fatty acids under frying conditions than TAG.     

A Hexameric Ribozyme Nanostructure Formed by Double-Decker Assembly of a Pair of Triangular Ribozyme Trimers

The modular architecture of naturally occurring ribozymes makes them a promising class of structural platform for the design and assembly of three-dimensional (3D) RNA nanostructures, into which the catalytic ability of the platform ribozyme can be installed. We have constructed and analyzed RNA nanostructures with polygonal-shaped (closed) ribozyme oligomers by assembling unit RNAs derived from the Tetrahymena group I intron with a typical modular architecture. In this study, we dimerized ribozyme trimers with a triangular shape by introducing three pillar units. The resulting double-decker nanostructures containing six ribozyme units were characterized biochemically and their structures were observed by atomic force microscopy. The double-decker hexamers exhibited higher catalytic activity than the parent ribozyme trimers.     

Correlations of Hepatic Hemodynamics,Liver Function,and Fibrosis Markers in Nonalcoholic Fatty Liver Disease: Comparison with Chronic Hepatitis Related to Hepatitis C Virus

The progression of chronic liver disease differs by etiology. The aim of this study was to elucidate the difference in disease progression between chronic hepatitis C (CHC) and nonalcoholic fatty liver disease (NAFLD) by means of fibrosis markers, liver function, and hepatic tissue blood flow (TBF). Xenon computed tomography (Xe-CT) was performed in 139 patients with NAFLD and 152 patients with CHC (including liver cirrhosis (LC)). The cutoff values for fibrosis markers were compared between NAFLD and CHC, and correlations between hepatic TBF and liver function tests were examined at each fibrosis stage. The cutoff values for detection of the advanced fibrosis stage were lower in NAFLD than in CHC. Although portal venous TBF (PVTBF) correlated with liver function tests, PVTBF in initial LC caused by nonalcoholic steatohepatitis (NASH-LC) was significantly lower than that in hepatitis C virus (C-LC) (p = 0.014). Conversely, the liver function tests in NASH-LC were higher than those in C-LC (p < 0.05). It is important to recognize the difference between NAFLD and CHC. We concluded that changes in hepatic blood flow occurred during the earliest stage of hepatic fibrosis in patients with NAFLD; therefore, patients with NAFLD need to be followed carefully.     

Methacrylate-based ionic liquid: radical polymerization/copolymerization with methyl methacrylate and evaluation of molecular weight of the obtained homopolymers

Azobisisobutyronitlite (AIBN)-induced free radical polymerization of a methacrylate-based ionic liquid monomer, 1-(2-methacryloxyethyl)-3-methylimidazolium bis(trifluoromethanesulfonyl)imide (Met-IL) was carried out in a common organic solvent, N,N-dimethylformamide (DMF), and an ionic liquid, 1-ethyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide (EMImTFSI). The molecular weight of the obtained poly(Met-IL) was evaluated by transforming it to non-ionic poly(methyl methacrylate) with hydrolysis of the imidazolium-salt-substituted pendant ester groups and methyl esterification. Radical copolymerization with methyl methacrylate (MMA) was also carried out in both DMF and EMImTFSI. Analysis of copolymer composition revealed that the reactivity of Met-IL was lower than that of MMA in both DMF and EMImTFSI solutions.     

Preparation of avidin-containing polyelectrolyte microcapsules and their uptake and release properties

Avidin-containing polyelectrolyte microcapsules were prepared by a layer-by-layer deposition technique and uptake and release of biotin-labelled fluorescein (b-FITC) was studied. The polyelectrolyte microcapsules were prepared by coating the surface of calcium carbonate (CaCO₃) microparticles containing avidin-poly(styrene sulfonate) (PSS) conjugate, followed by dissolution of CaCO₃ core in an ethylenediaminetetraacetic acid solution. Release of avidin from the microcapsules was markedly suppressed due to formation of a high molecular weight of avidin-PSS conjugate in the microcapsules. The uptake of b-FITC into the microcapsules was highly enhanced through a strong binding of b-FITC to avidin, as compared to the uptake into avidin-free microcapsules. Release of b-FITC from the microcapsules was accelerated upon addition of biotin, 2-iminobiotin, or lipoic acid in the solution due to the competitive binding of the additives to the binding site of avidin.     

Decomposition kinetics and recycle of binary hydrogen‐tetrahydrofuran clathrate hydrate

Decomposition kinetics and recycle of hydrogen–tetrahydrofuran (H₂–THF) clathrate hydrates were investigated with a pressure decay method at temperatures from 265.1 to 273.2 K, at initial pressures from 3.1 to 8.0 MPa, and at stoichiometric THF hydrate concentrations for particle sizes between 250 and 1000 μm. The decomposition was modeled as a two‐step process consisting of H₂ diffusion in the hydrate phase and desorption from the hydrate cage. The adsorption process occurred at roughly two to three times faster than the desorption process, whereas the diffusion process during formation was slightly higher (ca. 20%) than that during decomposition. Successive formation and decomposition cycles showed that occupancy seemed to decrease only slightly with cycling and that there were no large changes in hydrate structure due to cycling. Results provide evidence that the formation and decomposition of H₂ clathrate hydrates occur reversibly and that H₂ clathrate hydrates can be recycled with pressure. © 2010 American Institute of Chemical Engineers AIChE J, 2011     

Reduction of higher harmonic sequences in terminal voltage of an AC exciting synchronous generator using magnetically anisotropic slot wedges

This paper describes relationships between characteristics of a magnetically anisotropic slot wedge and voltage higher harmonics in an ac exciting synchronous generator terminal due to permeance ripple caused by an open-slot-type rotor. From the relationships obtained, practical guidelines were formulated for machine designs applying the magnetically anisotropic slot wedge. The results are as follows.

• 1 (1) Equivalent permeability of the magnetically anisotropic slot wedge became isotropic wedge permeability for air-gap flux ripple.
• 2 (2) Two ways were identified to reduce voltage-higher harmonics by using the slot wedges.
• 3 (3) The level of leakage flux passing through the anisotropic slot wedge was determined only by its permeability in the width direction.
• 4 (4) Effectiveness of the magnetic anisotropic slot wedges inserted into the stator slots was verified from experimental results using a model machine of the open- slot-type rotor.