Stability analysis of an adaptive packet access scheme for mobile communication systems with high propagation delays

In this paper, we investigate a packet access scheme that is able to support mixed traffics in the presence of high propagation delays. Referring to a Time‐Code Division Multiple Access air interface, we propose a Medium Access Control (MAC) protocol based on a random access scheme. A successful attempt grants the use of a slot‐code resource. This protocol is named Adaptive Time Code‐Packet Reservation Multiple Access (ATC‐PRMA), since the access parameters are changed, depending on the traffic load conditions, so as to fulfil Quality of Service requirements. Numerical examples are carried out for the Low Earth Orbit (LEO)‐Mobile Satellite System (MSS) scenario, but all these considerations could be applied to High‐Altitude Platform Stations (HAPSs) as well. In both cases, high propagation delays prevent an immediate feedback to users. An analytical approach is proposed to study the stability of our MAC scheme. Accordingly, we define a criterion for optimizing system performance. The predicted ATC‐PRMA behaviour is supported by simulation results. Finally, we show the performance improvement of ATC‐PRMA with respect to a MAC protocol not employing adaptive parameters. Copyright © 2003 John Wiley & Sons, Ltd.     

Scratch hardness and deformation maps for polycarbonate and polyethylene

This paper presents results obtained from the scratching of an ultrahigh molecular weight polyethylene (UHMWPE) and a polycarbonate (PC). The data are used to obtain various surface mechanical properties such as the hardness and also the prevailing deformation mechanisms. Scratch results are reported for the case of rigid conical indenters for various tip included angles, bulk temperatures, scratch velocities, and applied normal loads. Scanning electron microscopy (SEM) and laser profilometry data are used to study the surface deformation and damage mechanisms, and to assess the topography of the surfaces after scratching. Deformation maps are provided for these polymers under different experimental conditions, which describe the various deformation characteristics. In general, these polymers show both increasing and decreasing trends for the scratch hardness values with variation of cone angle, (4qW/ηd²; where W is the normal load, d the width of the residual scratch, and q is a characteristic contact parameter, which ranges between 1 and 2). The scratch velocity, which governs the imposed strain rate, imparts an increasing effect on the hardness values, whereas a higher bulk temperature of the material decreases the scratch hardness. The measured responses of the surface properties of these polymers are shown to greatly depend upon the kind of deformation mechanism prevalent during the scratching and associated material removal processes.     

The Role of Testosterone in the Elderly: What Do We Know?

Testosterone is the most important hormone in male health. Aging is characterized by testosterone deficiency due to decreasing testosterone levels associated with low testicular production, genetic factors, adiposity, and illness. Low testosterone levels in men are associated with sexual dysfunction (low sexual desire, erectile dysfunction), reduced skeletal muscle mass and strength, decreased bone mineral density, increased cardiovascular risk and alterations of the glycometabolic profile. Testosterone replacement therapy (TRT) shows several therapeutic effects while maintaining a good safety profile in hypogonadal men. TRT restores normal levels of serum testosterone in men, increasing libido and energy level and producing beneficial effects on bone density, strength and muscle as well as yielding cardioprotective effects. Nevertheless, TRT could be contraindicated in men with untreated prostate cancer, although poor findings are reported in the literature. In addition, different potential side effects, such as polycythemia, cardiac events and obstructive sleep apnea, should be monitored. The aim of our review is to provide an updated background regarding the pros and cons of TRT, evaluating its role and its clinical applicability in different domains.     

Molecular Mechanisms and Physiological Changes behind Benign Tracheal and Subglottic Stenosis in Adults

Laryngotracheal stenosis (LTS) is a complex and heterogeneous disease whose pathogenesis remains unclear. LTS is considered to be the result of aberrant wound-healing process that leads to fibrotic scarring, originating from different aetiology. Although iatrogenic aetiology is the main cause of subglottic or tracheal stenosis, also autoimmune and infectious diseases may be involved in causing LTS. Furthermore, fibrotic obstruction in the anatomic region under the glottis can also be diagnosed without apparent aetiology after a comprehensive workup; in this case, the pathological process is called idiopathic subglottic stenosis (iSGS). So far, the laryngotracheal scar resulting from airway injury due to different diseases was considered as inert tissue requiring surgical removal to restore airway patency. However, this assumption has recently been revised by regarding the tracheal scarring process as a fibroinflammatory event due to immunological alteration, similar to other fibrotic diseases. Recent acquisitions suggest that different factors, such as growth factors, cytokines, altered fibroblast function and genetic susceptibility, can all interact in a complex way leading to aberrant and fibrotic wound healing after an insult that acts as a trigger. However, also physiological derangement due to LTS could play a role in promoting dysregulated response to laryngo-tracheal mucosal injury, through biomechanical stress and mechanotransduction activation. The aim of this narrative review is to present the state-of-the-art knowledge regarding molecular mechanisms, as well as mechanical and physio-pathological features behind LTS.     

Coqoon

International Journal on Software Tools for Technology Transfer - User interfaces for interactive proof assistants have always lagged behind those for mainstream programming languages. Whereas...     

Sol–Gel Synthesis of λ–Na2O·xAl2O3 Films

Na₂O· x Al₂O₃ ( x = 9, 11)films have been obtained by sol–gel method. Crystallization processes during heat treatments have been investigated by X–ray diffraction analysis. A metastable phase with the mullite structure, λ–Na₂O· x Al₂O₃, has been observed starting from 800°C. Films remained stable after a heat treatment at 1000°C for 250 h. Impedance spectroscopy measurements showed that the films of λ-Na₂O· x Al₂O₃ possess a large three–dimensional ionic conductivity at 400°C.     

Ceramic Microtubes from Preceramic Polymers

A novel process for the production of ceramic microtubes involving the microextrusion of preceramic polymers was studied. Microtubes with a wide range of inner and outer diameters and several centimeters long were produced from two silicone resins. A coextrusion approach was also used to extend the forming capability of the technique. The addition of carbon black resulted in electrically conductive silicon oxycarbide (SiOC) ceramic microtubes. SiOC microtubes possessed a high bending strength, ranging from ∼30–1100 MPa.     

Preparation and characterization of poly(vinyl chloride)/polystyrene/poly(ethylene glycol) hollow‐fiber ultrafiltration membranes

Hollow‐fiber ultrafiltration (UF) membranes were prepared from blends of poly(vinyl chloride) (PVC) and polystyrene (PS) with a dry/wet phase inversion method. Poly(ethylene glycol) (PEG) and N,N‐dimethylacetamide were used as the additive and solvent, respectively. The effects of the PEG concentration in the dope solution as an additive on the cross sections and inner and outer surface morphologies, permeability, and separation performance of the hollow fibers were examined. The mean pore size, pore size distribution, and mean roughness of both the inner and outer surfaces of the produced hollow fibers were determined by atomic force microscopy. Also, the mechanical properties of the hollow‐fiber membranes were investigated. UF experiments were conducted with aqueous solutions of poly(vinyl pyrrolidone) (PVP; K‐90, M_w = 360 kDa). From the results, we found that the PVC/PS hollow‐fiber membranes had two layers with a fingerlike structure. These two layers were changed from a wide and long to a thin and short morphology with increasing PEG concentration. A novel and until now undescribed shape of the nodules in the outer surfaces, which was denoted as a sea‐waves shape, was observed. The outer and inner pore sizes both increased with increasing PEG concentration. The water permeation flux of the hollow fibers increased from 104 to 367 L m^?2 h^?1 bar^?1) at higher PEG concentrations. The PVP rejection reached the highest value at a PEG concentration of 4 wt %, whereas at higher values (from 4 to 9 wt %), the rejection decreased. The same trend was found also for the tensile stress at break, Young's modulus, and elongation at break of the hollow fibers. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 989‐1004, 2013     

LAS glass–ceramic scaffolds by three-dimensional printing

Highly porous (>60% open porosity) glass–ceramic scaffolds with remarkable mechanical properties (compression strength of ～15 MPa) were produced by indirect 3D printing. Precursor glass powders were printed into 3D ordered structures and then heat treated to sinter and develop crystalline phases. The final glass–ceramic contained a β-spodumene solid solution together with a secondary phase of lithium disilicate.The precision of the printed geometry and the density of the struts in the scaffold depended on several processing parameters (e.g. powder size and flowability, layer thickness) and were improved by increasing the binder saturation and drying time. Two types of powders with different particle size distribution (PSD) and flowability were used. Powders with a larger PSD, could be processed within a wider range of printing parameters due to their good flowability; however, the printing precision and the struts density were lower compared to the scaffolds printed using the powder in a smaller average PSD.