System study of carbon dioxide (CO2) capture in bio-based motor fuel production

A number of different technologies for producing renewable motor fuels have been studied; some effects of applying carbon dioxide (CO₂) capture to the production of renewable motor fuels are described in this paper. Some of the technologies studied are well suited for CO₂ capture. However, it is shown that the advantages with CO₂ capture for these technologies are not enough to offset their shortcomings described in previous studies, which show that the largest CO₂ reduction from biomass in Sweden may be achieved by producing fuel pellets for coal substitution or using the biomass in combined heat and power plants. A conclusion of the present paper is that even with CO₂ capture added to the respective technology, it is inefficient to use renewable resources for motor fuel production if the aim is to achieve as high CO₂ emission reduction as possible per input of biomass. Therefore, the large Swedish subsidies of the production of motor fuels appear sub-optimal, also when the possibility of CO₂ capture is considered. Nevertheless, incorporating CO₂ capture in the production of renewable motor fuels from biomass might be a cost-effective way of reducing CO₂ emissions.     

运行中可编程的增益控制

可能的最大值时,ADC 能提供最精确的数字输出。但当传感器输出的变化达到几个数量级或在许多数据采集系统中你不知道用户将使用何种信号连到该系统的情况下,如何使电压摆幅量最大化呢?动态范围的实质在信号调理方面,最受关注的问题是使系统的动态范围最大化。然而,在分析信号路径时,动态范围(DR)这一术语经常被采用甚至滥用。相反,信噪比(SNR)是明确的采用相同方法和处于同样环境下测量出的信号与噪声电平之比。在一个可编程的增益放大器(PGA)中,放大器中的噪声和最大信号电24 位的测量分辨率能为你解决什么问题?答案是有非常多的应用…     

The Role of Test Protocols in Automated Test Generation for Embedded-Core-Based System ICs

Modular testing is an attractive approach to testing large system ICs, especially if they are built from pre-designed reusable embedded cores. This paper describes an automated modular test development approach. The basis of this approach is that a core or module test is dissected into a test protocol and a test pattern list. A test protocol describes in detail how to apply one test pattern to the core, while abstracting from the specific test pattern stimulus and response values. Subsequent automation tasks, such as the expansion from core-level tests to system-chip-level tests and test scheduling, all work on test protocols, thereby greatly reducing the amount of compute time and data involved. Finally, an SOC-level test is assembled from the expanded and scheduled test protocols and the (so far untouched) test patterns. This paper describes and formalizes the notion of test protocols and the algorithms for test protocol expansion and scheduling. A running example is featured throughout the paper. We also elaborate on the industrial usage of the concepts described.     

Fluoroscopy-based 3-D reconstruction of femoral bone cement: a new approach for revision total hip replacement

In revision total hip replacement the removal of the distal femoral bone cement can be a time consuming and risky operation due to the difficulty in determining the three-dimensional (3-D) boundary of the cement. We present a new approach to reconstruct the bone cement volume by using just a small number of calibrated multiplanar X-ray images. The modular system design allows the surgeon to react intraoperatively to problems arising during the individual situation. When encountering problems during conventional cement removal, the system can be used on demand to acquire a few calibrated X-ray images. After a semi-automatic segmentation and 3-D reconstruction of the cement with a deformable model, the system guides the surgeon through a free-hand navigated or robot-assisted cement removal. The experimental evaluation using plastic test implants cemented into anatomic specimen of human femoral bone has shown the potential of this method with a maximal error of 1.2 mm (0.5 mm RMS) for the distal cement based on just 4-5 multiplanar X-ray images. A first test of the complete system, comparing the 3-D-reconstruction with a computed tompgraphy data set, confirmed these results with a mean error about 1 mm.     

爱立信IMS weShare分享每一天(系列之二)如何提供出色的用户体验?

爱立信IMS weShare业务有20%的开发与用户视觉体验相关(用户界面、图标、标签以及进度条),其它的80%则主要致力于设备间的系统.与此相对比,用户的体验则完全(100%)有赖于其可接触的事物.     

Electro‐Optics of Colloidal Quantum Dot Solids for Thin‐Film Solar Cells

The electro‐optics of thin‐film stacks within photovoltaic devices plays a critical role for the exciton and charge generation and therefore the photovoltaic performance. The complex refractive indexes of each layer in heterojunction colloidal quantum dot (CQD) solar cells are measured and the optical electric field is simulated using the transfer matrix formalism. The exciton generation rate and the photocurrent density as a function of the quantum dot solid thickness are calculated and the results from the simulations are found to agree well with the experimentally determined results. It can therefore be concluded that a quantum dot solid may be modeled with this approach, which is of general interest for this type of materials. Optimization of the CQD solar cell is performed by using the optical simulations and a maximum solar energy conversion efficiency of 6.5% is reached for a CQD solid thickness of 300 nm.     

High‐Efficiency InP‐Based Photocathode for Hydrogen Production by Interface Energetics Design and Photon Management

The solar energy conversion efficiency of photoelectrochemical (PEC) devices is usually limited by poor interface energetics, limiting the onset potential, and light reflection losses. Here, a three‐pronged approach to obtain excellent performance of an InP‐based photoelectrode for water reduction is presented. First, a buried p–n⁺ junction is fabricated, which shifts the valence band edge favorably with respect to the hydrogen redox potential. Photoelectron spectroscopy substantiates that the shift of the surface photovoltage is mainly determined by the buried junction. Second, a periodic array of InP nanopillars is created at the surface of the photoelectrode to substantially reduce the optical reflection losses. This device displays an unprecedented photocathodic power‐saved efficiency of 15.8% for single junction water reduction. Third, a thin TiO₂ protection layer significantly increases the stability of the InP‐based photoelectrode. Careful design of the interface energetics based on surface photovoltage spectroscopy allows obtaining a PEC cell with stable record performance in water reduction.     

A pragmatic approach to wind farm simulations using the dynamic wake meandering model

This paper presents a computationally efficient method for using the dynamic wake meandering model to conduct simulations of wind farm power production. The method is based on creating a database, which contains the time and rotor‐averaged wake effect at any point downstream of a wake‐emitting turbine operating in arbitrary ambient conditions and at an arbitrary degree of wake influence. This database is later used as a look‐up table at runtime to estimate the operating conditions at all turbines in the wind farm, thus eliminating the need to run the dynamic wake meandering model at runtime. By using the proposed method, the time required to conduct wind farm simulations is reduced by three orders of magnitude compared with running the standalone dynamic wake meandering model at runtime. As a result, the wind farm production dynamics for a farm of 100 turbines at 10,000 different sets of ambient conditions run on a normal laptop in 1 h. The method is validated against full scale measurements from the Smøla and OWEZ wind farms, and fair agreement is achieved. Copyright © 2014 John Wiley & Sons, Ltd.     

Field test results of multi-channel digital tv transmission at 15 and 30 Mb/s through an intelsat satellite using a PSK/FDMA system

This paper describes field test results of multi-channel digital TV transmission using a PSK/FDMA system and the related subjective test results of received TV pictures. The picture quality of the multi-channel 15 or 30 Mb/s transmission for both NTSC and PAL systems through the INTELSAT POR satellite are subjectively evaluated for various bit-error rates. In addition, subjective evaluations were made at various values of earth-station e.i.r.p. to compare the picture quality of digital transmissions with that of current half-transponder FM transmission.