Acicular ferrite transformation in deformed austenite of an alloy-steel weld metal

The effect of different amounts (5, 10 and 15%) of compressive deformation of austenite on the isothermal transformation of acicular ferrite in an alloy-steel weld metal has been investigated. It was found that prior deformation of austenite significantly enhanced acicular ferrite transformation. At the same isothermal transformation temperature, as a higher amount of prior deformation was applied, a greater quantity of acicular ferrite could be obtained and the size of acicular ferrite plates became much finer. These results implied that the effective nucleation sites of acicular ferrite increased with increasing amount of prior deformation. The other results also emphasized that the accumulated strain (due to prior deformation of austenite) could trigger acicular ferrite to nucleate on inclusions at high temperatures, where undeformed austenite remained stable. The acicular ferrite start temperature was found to be raised continuously by increasing the amount of prior deformation of austenite. Further evidence suggests that the application of deformation can boost the driving force for acicular ferrite formation. This phenomenon is similar to the case in which martensite forms under the influence of deformation.     

Relationship between CO2 Sensor Voltage Response and Phase Equilibrium of Solid Electrolyte Na, K-β/β"-Al2O3

A type of CO2 sensor based on oxygen concentration cell was designed as following: Cell I: Pt | Au, O2,CO2|Na2CO3(Au)|NKBA(Au)|YSZ|O2, CO2|Pt or Cell Ⅱ: Pt|Au, O2, CO2|K2CO3(Au)|NKBA(Au)|YSZ|O2, CO2|Pt.(Na,K-β/β″-Al2O3 is named by NKBA). The sensor signal is consistent with the Nernstian slope within the region ofphase equilibrium for Na, K-β/β"-Al2O3 material. The relationship between CO2 sensor voltage response and phaseequilibrium of solid electrolyte Na, K-β/β-Al2O3 is discussed in this paper.     

Comparison of two models for a high temperature reactor coupled to a gas turbine

This paper presents two independent dynamic models of a nuclear gas turbine power plant. Both the high temperature nuclear reactor (HTR) and its energy conversion system (ECS) based on a direct Brayton cycle have been modelled. One model utilises RELAP5 for the ECS, the other Aspen Custom Modeler (ACM). The reactor model used in both models is a point kinetic model derived from a detailed reactor model. The ECS model is described and compared componentwise, with an emphasis on the turbomachinery. The total plant models are compared with each other by calculating two representative transients: one load rejection transient and one transient with the system at part load.     

Reply to Comment on “Ewald summation technique for one-dimensional charge distributions”

We explain why the methods in Langridge, Hart and Crampin [Comput. Phys. Commun. 134 (2001) 78] suffice for the evaluation of the lattice sums entering the Madelung matrix describing multipole interactions in systems with one-dimensional translational periodicity.     

Interface Management within Construction: In Particular, Building Facade

This paper discusses the need for interface management within construction, with particular reference to building facade interfaces. It categorizes the three different types of interface management—physical, contractual, and organizational. The implication of interface management in construction contracting is discussed; it is explained how the U.K. procurement trends have changed, affecting the interface management within projects. U.K. cladding procurement is very fragmented, and the paper maps the development of a typical cladding system showing the complexities of interface management. Finally, the paper discusses CladdISS, a U.K. government funded research project to develop a standardized strategy for the design and management of window and cladding interfaces. It explains the principles of CladdISS with reference to process maps, action plans, management strategy, bibliography, advice on standards, materials, maintenance, joints, movement, and tolerances. This will enable strategies to be developed to avoid the endemic interface problems occurring on-site. It will also guide the management of the interfaces throughout the project.     

Alliance and Dropout in Family Therapy for Adolescents With Behavior Problems: Individual and Systemic Effects.

This study examined the relationship between alliance and retention in family therapy. Alliance was examined at the individual (parent and adolescent) and family levels (within-family differences). Participants were 34 families who received functional family therapy for the treatment of adolescent (aged 12-18 years) behavior problems. Families were classified as treatment dropouts (n=14) or completers (n=20). Videotapes of the first sessions were rated to identify parent and adolescent alliances with the therapist. Results demonstrated that individual parent and adolescent alliances did not predict retention. However, as hypothesized, dropout cases had significantly higher unbalanced alliances (parent minus adolescent) than did completer cases. These findings highlight the importance of alliances in functional family therapy and suggest that how the alliance operates in conjoint family therapy may be a function of systemic rather than of individual processes. (PsycINFO Database Record (c) 2010 APA, all rights reserved)