Post-deposition treatment effects on hydroxyapatite vacuum plasma spray coatings

The purpose of this work is to evaluate the effects of post-deposition heat treatments on high and low crystallinity hydroxyapatite coatings on Ti6Al4V alloy. HA layers were produced by the vacuum plasma spray (VPS) technique, and the desired degrees of crystallinity were obtained by changing the deposition parameters. An analysis of the mechanical properties of the coatings and their adhesion to the substrate has been done by shear strength test. X-ray diffraction analysis was used to detect the structure and the chemical components in which HA dissociates during the deposition process and heat treatments. The data obtained indicates that heat treatments can increase the crystallinity of HA, but they also introduce a mechanical degradation of the coatings. After heat treatments, it was also observed that a large amount of tetracalcium phosphate was formed.     

FOCUS-type fuel assembly for PWRs

In recent years the development efforts for Siemens PWR fuel assemblies were mainly concentrated on reducing the fuel cycle costs and increasing the operational reliability of the fuel assemblies.The first objective was aimed at increasing the average discharge burnup to > 50 MWd/kgU and increasing the critical heat flux. The high envisaged burnup required to develop a corrosion resistant cladding tube outside the Zry-4 range. The decision was made to use a Duplex cladding tube consisting of a corrosion optimized outer layer on a Zry-4 base material. A ZrSnFeCr alloy with reduced tin content was chosen for the outer layer. The critical heat flux could be increased by introducing mixing vanes on the spacer grids within the active length.To reach the second objective, reliable avoidance of spacer grid damage during core loading and unloading and reduction of fuel rod defects by debris fretting, the spacer grid corners were improved and a debris separation grid was developed.These design improvements were introduced into the new FOCUS-type fuel assembly. The name FOCUS stands for “Fuel assembly with Optimized Cladding and Upgraded Structure”.     

Auditory hallucinations suppressed by etizolam in a patient with schizophrenia

A patient presented with a 15 year history of schizophrenia with auditory hallucinations. Though unresponsive to prolonged trials of neuroleptics, the auditory hallucinations disappeared with etizolam.     

Effect of grain boundary phase on the thermal conductivity of aluminium nitride ceramics

AIN with high thermal conductivity was fabricated by pressureless sintering with Y₂O₃ as the sintering aid. The thermal conductivity was observed to increase with sintering time (up to 8 h) at 1810 °C. The distribution of the sintering aid was identified as one of the major factors influencing the thermal conductivity in AIN. Non-uniform distribution of the grain boundary phase was found to be associated with a significant amount of porosity, resulting in the enhancement of phonon scattering and thereby lowering the thermal conductivity.     

Two new decoding algorithms for Reed-Solomon codes

The subject of decoding Reed-Solomon codes is considered. By reformulating the Berlekamp and Welch key equation and introducing new versions of this key equation, two new decoding algorithms for Reed-Solomon codes will be presented. The two new decoding algorithms are significant for three reasons. Firstly the new equations and algorithms represent a novel approach to the extensively researched problem of decoding Reed-Solomon codes. Secondly the algorithms have algorithmic and implementation complexity comparable to existing decoding algorithms, and as such present a viable solution for decoding Reed-Solomon codes. Thirdly the new ideas presented suggest a direction for future research. The first algorithm uses the extended Euclidean algorithm and is very efficient for a systolic VLSI implementation. The second decoding algorithm presented is similar in nature to the original decoding algorithm of Peterson except that the syndromes do not need to be computed and the remainders are used directly. It has a regular structure and will be efficient for implementation only for correcting a small number of errors. A systolic design for computing the Lagrange interpolation of a polynomial, which is needed for the first decoding algorithm, is also presented.This research was supported by a grant from the Canadian Institute for Telecommunications Research under the NCE program of the Government of Canada     

Cuprates intermediate between one and two dimensions

The key elements in all known cuprate superconductors are lightly doped CuO_i-planes. Recently a new homologous series of compounds Sr_n–1Cu_n+1O_2n have been reported in which the planes contain a parallel array of line defects which form a trellis lattice with ladder-segments of the square lattice weakly coupled through triangular line defects. The width of the ladder segments is determined by the parameter n and varies from single chains to arbitrarily wide ladders. The magnetic properties of undoped compounds will be dominated by the properties of the ladders. Heisenberg s = 1/2 ladders can have a spin liquid groundstate with a spin gap if the number of rungs is odd so that a short range RVB groundstate is predicted for such trellis lattices. Using a t-J model to describe the doped material leads to the prediction of a d-wave RVB superconducting groundstate with a large spin gap.     

Built-in test factors in a life cycle cost model

A method is given for incorporating the effects of built-in test (BIT) into the life cycle cost of a given electronic system. A cost model is derived that captures the savings achieved by BIT through reducing the maintenance times, complexity of external test equipment, personnel skill levels, amount of spare parts, and the need for preventive maintenance. The model also includes such design considerations as false alarms, diagnostic errors, undetected faults, BIT hardware failures, and diagnostic ambiguity.     

Finite element approach for the modal analysis of open-boundarywaveguides

A general finite element approach to computing the modes of open-boundary waveguides is presented. This efficient and robust scheme applies equally to situations with real and complex propagation constants. By using a localised boundary impedance condition, the approach preserves the sparsity of the global matrices. A comparison with the well established infinite element technique and the analysis of a 2-D leaky optical structure are given as examples     

Fracture behaviour of unmodified and rubber-modified epoxies under hydrostatic pressure

The fracture toughness and uniaxial tensile yield strengths of unmodified and CTBN-rubber-modified epoxies were measured under hydrostatic pressure. The purpose of these experiments was to learn how suppressing cavitation in rubber particles affects the deformation mechanisms and the fracture toughness of rubber-modified epoxy. It was found that the cavitation of CTBN-rubber could be suppressed at a relatively low pressure (between 30 and 38 M Pa). With cavitation suppressed, the rubber particles are unable to induce massive shearyielding in the epoxy matrix, and the fracture toughness of the rubber-modified epoxy is no higher than that of the unmodified epoxy in the pressure range studied. Unmodified epoxy shows a brittle-to-ductile transition in fracture toughness test. The reason for this transition is the postponement of the cracking process by applied pressure.Work performed while on a sabbatical leave at the University of Michigan.     

Explicit robust schemes for implementation of a class of principal value-based constitutive models: Symbolic and numeric implementation

The issue of developing effective and robust schemes to implement a class of the Ogden-type hyperelastic constitutive models is addressed. To this end, special purpose functions (running under MACSYMA) are developed for the symbolic derivation, evaluation, and automatic FORTRAN code generation of explicit expressions for the corresponding stress function and material tangent stiffness tensors. These explicit forms are valid over the entire deformation range, since the singularities resulting from repeated principal-stretch values have been theorectically removed. The required computational algorithms are outlined, and the resulting FORTRAN computer code is presented.