Recovery of chromium from tannery effluents using a redox–adsorption approach

Adsorption isotherms for sodium and trivalent chromium uptake from aqueous solutions onto Amberlite resin were prepared at 18°C. Adsorption of each cation followed the Langmuir model. The rate of uptake of each cation was found to be film diffusion controlled with sodium showing the most rapid uptake. In aqueous solutions containing both chromium and sodium as the only cationic species, it was found that with increasing initial concentration of sodium, the trivalent chromium uptake on the resin decreased substantially. To overcome this difficulty a four step redox–adsorption system has been developed for the removal of Cr³⁺ from tannery effluents. The first step comprises the oxidation of trivalent chromium to the hexavalent form using selected common oxidising agents. The liquid effluent is then passed through an Amberlite cation-exchange resin in step 2 where the sodium in the waste stream is completely removed. The anionic hexavalent form of chromium (Cr₂O) passes unaltered through the resin along with the waste stream. In the third stage the dichromate is reduced back to the trivalent cationic form which is subsequently removed from the waste stream by a second Amberlite ion-exchange bed in stage 4. Each step in this process is assessed in batch and flow mode using simulated and real tannery effluents.     

Fiber-linked telescope array: description and laboratory tests of a two-channel prototype

We present a complete two-telescope version of a fiber-linked coherent array that is meant to be used for mounting on the dish of a radio telescope. This was built with 20-cm amateur telescopes and includes three different servo subsystems for guiding, nulling of the air path difference, and fiber length control. Laboratory tests of the fully integrated system in front of a star simulator are described.     

Progressive ladder network topology combining interferometric and intensity fiber-optic-based sensors

Progressive ladder topology is studied by consideration of its properties of power budget and coupler tailoring. Optimization criteria are addressed for lossless and real systems, and their basic characteristics are compared with other topologies. Numerical results are presented, and an experiment is described for the case in which the network supports interferometric and intensity (with referentiation) fiber-optic-based sensors.     

Simple laser velocimeter that uses photoconductive semiconductors to measure optical frequency differences

The dc photocurrents generated by steady-state moving space-charge fields inside photoconductive semiconductors containing deep level donors and traps can be used to determine the relative frequency differences between the two interfering optical fields that establish the space-charge fields. A simple laser velocimeter that uses a semi-insulating GaAs:Cr sample to detect the Doppler frequency shift between two laser beams is demonstrated.     

Detection of probe dither motion in near-field scanning optical microscopy

The probe-to-sample separation in near-field scanning optical microscopes can be regulated by a noncontact shear-force sensing technique. The technique requires the measurement of a minute dither motion applied to the probe. We have characterized an optical detection method for measuring this motion to determine the optimum detection configuration in terms of sensitivity and stability. A scalar diffraction model of the detection method is developed for calculating sensitivity, and experimental results are found to be in good agreement with the theoretical predictions. We find that maximum sensitivity and stability cannot be achieved simultaneously, and it may be desirable in practice to trade sensitivity for enhanced stability.