Formation of C49-TiSi2 in flash memories: a nucleation controlled phenomenon?

The formation of Ti silicides has been examined in flash memories with 0.25 μm linewidth by X-ray diffraction, scanning electron microscopy, and transmission electron microscopy. It has been observed that, after the first rapid thermal process and the selective metal etch, there is no silicide on the source and on a majority of drain contacts while C49-TiSi₂ is found on the gate. A pre-amorphisation implant increases drastically the formation of C49-TiSi₂ in the drain zone while modifications of annealing conditions have little impact. These results indicate that the formation of C49-TiSi₂ is most likely controlled by nucleation and that this nucleation is sensitive to both the width and the length of the reaction zone. The formation of a Ti rich silicide may play an important role in this nucleation by decreasing the driving force for the formation of C49-TiSi₂. Curiously enough, the formation of C49-TiSi₂ appears thus as a major concern for the salicide process in flash memories.     

Characterisation of a 300× photovoltaic concentrator system with one-axis tracking

A solar concentrator with one-axis tracking is being developed at our institute. This concentrator system achieves a high geometrical concentration ratio of 300 using a parabolic trough mirror and a three-dimensional second stage consisting of compound parabolic concentrators. The design of the system as well as the characterisation of the second stage is described in this paper.     

Efficient dissemination of personalized information using content-based multicast

There has been a surge of interest in the delivery of personalized information to users (e.g., personalized stocks or travel information), particularly as mobile users with limited terminal device capabilities increasingly desire updated and targeted information in real time. When the number of information recipients is large and there is sufficient commonality in their interests, as is often the case, IP multicast is an efficient way of delivering the information. However, IP multicast services do not consider the structure and semantics of the information in the multicast process. We propose the use of Content-Based Multicast (CBM) where extra content filtering is performed at the interior nodes of the IP multicast tree; this will reduce network bandwidth usage and delivery delay, as well as the computation required at the sources and sinks. We evaluate the situations in which CBM is advantageous. The benefits of CBM depend critically upon how well filters are placed at interior nodes of the IP multicast tree and the costs depend upon those introduced by filters themselves. Further, we consider the benefits of allowing the filters to be mobile so as to respond to user mobility or changes in user interests and the corresponding costs of filter mobility. The criterion that we consider is the total network bandwidth utilization. For this criterion, we develop an optimal filter placement algorithm, as well as a heuristic that executes faster than the optimal algorithm. We evaluate the algorithms by means of simulation experiments. Our results indicate that filters can be effective in substantially reducing bandwidth. We also find filter mobility is worthwhile if there is marked large-scale user mobility. We conclude with suggestions for further work.     

Designing and prototyping data-intensive applications in the Logresand Algres programming environment

The authors present an environment and a methodology for the design and rapid prototyping of data-intensive software applications, i.e., applications which perform substantial retrieval and update activity on persistent data. In the approach, the application is formally specified using Logres, a database language which combines object-oriented data modeling and rule-based programming. These specifications are translated into Algres, an extended relational algebra, thus yielding a rapid executable prototype. Algres programs embedded into a conventional programming language interface may be converted to conventional programs operating on a commercial relational system. This methodology helps automate the conversion from declarative requirements to imperative code, performing several tasks fully automatically and reducing the probability of human errors, while integrity constraints and application specifications are expressed in a declarative language, at a very high level of abstraction     

Medical-grade acrylic adhesives for skin contact

Pressure-sensitive acrylic adhesives for application to skin are made from 2-ethylhexyl acrylate, isooctyl acrylate or n-butyl acrylate copolymerized with polar functional monomers such as acrylic acid, methacrylic acid, vinyl acetate, methyl acrylate, N-vinylcaprolactam, or hydroxyethyl methacrylate. Functional comonomers increase cohesive strength, provide surface polarity, and enhance wear performance. Tack, adhesion to skin, adhesive transfer to skin, and wear performance of the adhesive are governed by the molecular weight, glass transition temperature, and the viscoelastic behavior of the adhesive. Viscoelastic properties of the adhesive as measured by the Williams plasticity number (WPN), dynamic storage modulus (G′), dynamic loss modulus (G″), and tan δ are important polymer properties for good wear performance. Sweating skin, a moist environment, and physical activity are the most important factors influencing the failure of an adhesive tape during wear. A medicalgrade adhesive for application to human skin should be hypoallergenic. Medical-grade adhesives are utilized in making surgical tapes for holding dressings in place, adhesive bandages, adhesive dressings to cover wounds, and surgical operating drapes.     

Reversible or irreversible modification of [3H]PAF binding on rabbit platelet membranes differentiates various PAF receptor antagonists

[³H]Platelet-activating factor (PAF) binding to rabbit platelet membranes was examined before and after 20 min preincubation at 25°C in the presence of PAF, lysoPAF, or of five different PAF receptor antagonists (L 652731, BN 52021, WEB 2086, BN 52111 and BN 52115). When platelet membranes were not washed after preincubation with PAF or PAF antagonists, no significant specific binding of [³H]PAF was observed, which suggests full occupancy of the binding sites. When membranes were extensively washed, full recovery of specific [³H]PAF binding was attained with L 652731 and partial recoveries (60%, 55% and 30%) were reached with BN52021, WEB 2086 and PAF, respectively; no recovery was seen with the dioxolanes BN 52111 and BN 52115. Scatchard analysis of the binding data indicated that no significant change in the dissociation constant (K_d) and maximum number of binding sites (B_max) occurred after preincubation of platelet membrane with L 652731, whereas a reduction of B_max was observed when PAF and BN 52021 were measured. When platelet membranes were preincubated with WEB 2086, B_max and K_d significantly increased. The data suggest differing binding properties for PAF and the PAF antagonists. Some of the PAF antagonists may tightly bind to the PAF receptor site(s) and/or irreversibly modify or downregulate PAF recognition sites. Our results also suggest that the interaction of PAF receptor antagonists with PAF receptor can be divided into at least two components, namely a reversible component and an irreversible one. Based on a paper presented at the Third International Conference on Platelet-Activating Factor and Structurally Related Alkyl Ether Lipids, Tokyo, Japan, May 1989.     

Comparison between the effects of positive noncatastrophic HBM ESDstress in n-channel and p-channel power MOSFETs

The effect of noncatastrophic positive human body model (HBM) electrostatic discharge (ESD) stress on n-channel power MOSFETs is radically different from that on p-channel MOSFETs. In n-channel transistors, the stress causes negative shifts of the current-voltage characteristics indicative of positive charge trapping in the gate oxide. In p-channel transistors, the stress increases the drain-to-source leakage current, probably due to localized avalanche electron injection from the p-doped drain     

Effect of precyclic loading on stress-corrosion-cracking initiation in an X-65 pipeline steel exposed to near-neutral pH soil environment

A study was carried out to understand the effect of precyclic loading on stress-corrosion-crack initiation in an X-65 pipeline steel exposed to a near-neutral-pH soil environment. The test specimens were precyclically loaded before corrosion exposure to represent a service history of up to about 20 years, depending on the severity of pressure fluctuation. Microcracks had initiated on the polished surface of the X-65 pipeline steel after long-time exposure at open-circuit potential (OCP) in a near-neutral-pH synthetic soil solution. These microcracks were mostly initiated from pits at metallurgical discontinuities such as grain boundaries, pearlitic colonies, and banded phases in the steel. Strong preferential dissolution was observed along planes of the banded structures in the steel. The selective corrosion attack at these metallurgical discontinuities is attributed to the galvanic nature of those areas to their neighbors. Cyclic loading prior to corrosion exposure had significant effects on microcrack initiation and propagation during subsequent corrosion exposure. Cyclic loading prior to corrosion exposure either reduced or increased the probability of crack initiation and the rate of crack propagation, depending upon the magnitude of the stress cycles. The largest reduction was seen at a peak cyclic stress of about 0.8 of the yield strength. This cyclic-loading-dependent cracking behavior might be related to the alteration of the substructures and the residual stress in the steel as a result of precyclic loading.     

Narcissism, sexual refusal, and aggression: Testing a narcissistic reactance model of sexual coercion.

Laboratory analog studies investigated the theory that narcissism and reactance contribute to causing rape. In Study 1, narcissism correlated positively with rape-supportive beliefs and negatively with empathy for rape victims. In Study 2, narcissists reported more enjoyment than other men of film depictions that presented consensual, affectionate activity followed by rape (but not in response to either affection or rape alone). In Study 3, narcissists were more punitive than other men toward a female confederate who refused to read a sexually arousing passage aloud to them. (PsycINFO Database Record (c) 2010 APA, all rights reserved)