A versatile leaky-wave antenna based on stub-loaded rectangularwaveguide .III. Comparisons with measurements

For pt.II ibid., vol.46, no.7, p.1042-46. The article describes the measurements that verify the validity of the theoretical expressions for this new type of antenna. Measurements were made both at millimeter wavelengths (40 to 60 GHz) and in the X-band (8 to 12 GHz) frequency range and of two different quantities: the propagation wavenumbers β and α and radiation patterns. Comparisons were made with numerical values obtained from the theoretical expressions derived in parts I and II and very good agreement was found in all cases     

The effect of surface roughness on the radiative properties ofpatterned silicon wafers

The radiative properties of patterned silicon wafers have a major impact on the two critical issues in rapid thermal processing (RTP), namely wafer temperature uniformity and wafer temperature measurement. The surface topography variation of the die area caused by patterning and the roughness of the wafer backside can have a significant effect on the radiative properties, but these effects are not well characterized. We report measurements of room temperature reflectance of a memory die, logic die, and various multilayered wafer backsides. The surface roughness of the die areas and wafer backsides is characterized using atomic force microscopy (AFM). These data are subsequently used to assess the effectiveness of thin film optics in providing approximations for the radiative properties of patterned wafers for RTP applications     

A Low-Power Wide-Dynamic-Range Analog VLSI Cochlea

Low-power wide-dynamic-range systems are extremely hard to build. The biological cochlea is one of the most awesome examples of such a system: It can sense sounds over 12 orders of magnitude in intensity, with an estimated power dissipation of only a few tens of microwatts. In this paper, we describe an analog electronic cochlea that processes sounds over 6 orders of magnitude in intensity, and that dissipates 0.5 mW. This 117-stage, 100 Hz to 10 KHz cochlea has the widest dynamic range of any artificial cochlea built to date. The wide dynamic range is attained through the use of a wide-linear-range transconductance amplifier, of a low-noise filter topology, of dynamic gain control (AGC) at each cochlear stage, and of an architecture that we refer to as overlapping cochlear cascades. The operation of the cochlea is made robust through the use of automatic offset-compensation circuitry. A BiCMOS circuit approach helps us to attain nearly scale-invariant behavior and good matching at all frequencies. The synthesis and analysis of our artificial cochlea yields insight into why the human cochlea uses an active traveling-wave mechanism to sense sounds, instead of using bandpass filters. The low power, wide dynamic range, and biological realism make our cochlea well suited as a front end for cochlear implants.     

Spectral multidomain approximation of elliptic problems with mixed conditions on the interfaces

The multidomain technique for elliptic problems, that allows the fulfillment of the interface conditions by means of a suitable combination of the continuity of the solution and of its normal derivative, is considered. Some choices of this combination are investigated and, in particular, a choice that allows the solution of the multidomain problem through two solutions for each subproblem, is proposed. The scheme has been discretized with a collocation method and some numerical tests are reported. Moreover the method is compared with the more classical Dirichlet/Neumann one as well as with the capacitance matrix method.This research has been supported by a grant from M.P.I. (40%).     

Modeling of current-voltage characteristics for strained andlattice matched HEMT's on InP substrate using a variational chargecontrol model

A model for the calculation of the current-voltage characteristics of strained In_0.52Al_0.48As/In_xGa_1-xAs on InP substrate High Electron Mobility Transistors (HEMT's), based on a variational charge control model, is presented. A polynomial fit of the two-dimensional electron gas (2DEG) density is used for the calculation of the current-voltage characteristics. The effect of strain is introduced into the 2DEG density versus gate voltage relation. Very good agreement between the calculated and measured I-V characteristics was obtained. In addition, our results show that, for an indium mole fraction of the In_xGa_1-xAs channel in the range 0.53-0.60, increasing the indium mole fraction lowers the threshold voltage and hence increases the drain current at the same gate bias     

Investigation of iron borate on the submillimeter waves

Antiferromagnetic resonance (AFMR) in iron borate at the frequency of 300 GHz at the room temperature in weak (down to 0.1T) external magnetic fieldH has been studied. The loss in AFMR line increased or decreased depending on the direction and magnitude ofH. Such properties ofFeBO ₃ monocrystals allows to design undirectional and modulation devices.     

GD3/proteosome vaccines induce consistent IgM antibodies against the ganglioside GD3

The gangliosides of melanoma and other tumours of neuroectodermal origin are suitable targets for immune intervention with tumour vaccines. The optimal vaccines in current use contain ganglioside plus bacillus Calmette-Guérin and induce considerable morbidity. We have screened a variety of new adjuvants in the mouse, and describe one antigen-delivery system, proteosomes, which is especially effective. Highly hydrophobic Neisserial outer membrane proteins (OMP) form multimolecular liposome-like vesicular structures termed proteosomes which can readily incorporate amphiphilic molecules such as GD3 ganglioside. The optimal GD3/proteosome vaccine formulation for induction of GD3 antibodies in the mouse is determined. Interestingly, the use of potent immunological adjuvants in addition to proteosomes augments the IgM and IgG antibody titres against OMP in these vaccines but GD3 antibody titres are unaffected. The application of proteosomes to enhance the immune response to GD3 extends the concept of the proteosome immunopotentiating system from lipopeptides to amphipathic carbohydrate epitopes such as cell-surface gangliosides. The demonstrated safety of meningococcal OMP in humans and the data in mice presented here suggest that proteosome vaccines have potential for augmenting the immunogenicity of amphipathic tumour antigens in humans.     

Tramadol, M1 metabolite and enantiomer affinities for cloned human opioid receptors expressed in transfected HN9.10 neuroblastoma cells

Tramadol hydrochloride is a centrally acting synthetic analgesic in widespread clinical use. Despite different degrees of opioid-like characteristics in preclinical tests, it is characterized by lack of full naloxone reversibility or naloxone-precipitated withdrawal in humans. To investigate this apparent discrepancy, the present study measured the affinity of tramadol (and its enantiomers) and an active O-desmethyl metabolite (M1) (and its enantiomers) to cloned human opioid receptors of the mu, delta and kappa type stably expressed in HN9.10 neuroblastoma cells. At mu sites, the Ki values for tramadol, its (+) and (-) enantiomers, M1, and its (+) and (-) enantiomers were 17000, 15700, 28800, 3190, 153 and 9680 nM, respectively, compared to 7.1 nM for morphine. These results are consistent with the suggestion of a non-opioid contribution to the clinical profile of tramadol.     

Real-World Robotics: Learning to Plan for Robust Execution

In executing classical plans in the real world, small discrepancies between a planner's internal representations and the real world are unavoidable. These can conspire to cause real-world failures even though the planner is sound and, therefore, proves that a sequence of actions achieves the goal. Permissive planning, a machine learning extension to classical planning, is one response to this difficulty. This paper describes the permissive planning approach and presents GRASPER, a permissive planning robotic system that learns to robustly pick up novel objects.