A-氧化铁气敏纳米晶锡掺杂最佳含量的理论计算

应用与晶体结构和掺杂上关的最佳掺杂含量的理论表达式,对氧化铁气敏纳米晶粉体中锡掺杂最佳含量进行理论计算。定量计算的结果与实验数据相符合。该理论经适当的修改和解释后也适用于某些其他电子薄膜材料的最佳掺杂含量问题。     

Performance effects of innovative IT applications over time

There is evidence to indicate that the effects of new product and service innovations change over time as a result of learning and competition. However, there have not been any studies of the effects of learning and competition on the impacts of innovative information technology (IT) applications. This paper presents the results of an extensive study of the effects of very early investments in automated teller machines (ATMs) by banks, on market share and overall bank performance. The study spans the period from 1971 to 1984 and includes 2534 banks from across the United States. The results indicate that the impacts of early ATM investments can best be described by exponential and logistic models, indicating that the benefits were very small at first, but increased rapidly after a few years. In addition, the benefits obtained by the earliest adopters were larger than those obtained by the banks that adopted later. These results have important implications for IT investment decisions. The results also suggest that cross-sectional studies, conducted soon after an application is installed, may fail to find benefits even if large benefits are obtained     

Blocage par injection de modes sous- harmoniques d’un oscillateur utilisant une ligne à retard à ondes de surface

A nonlinear regeneration pulsed oscillator driven by a monochromatic source has been built. Subharmonics of the resonance carrier/modulation are measured with an accuracy of 10^-10 thanks to the use of a double beats measurement set-up. The multiscale analysis of frequency readings reveals a rich fine structure which is in agreement with the nonlinear topological approach of synchronized states.     

Delay sensing for long-term variations and defects monitoring in safety–critical applications

The impact of parametric variations on digital circuit performance is increasing in nanometer Integrated Circuits (IC), namely of Process, power supply Voltage and Temperature (PVT) variations. Moreover, circuit aging also impacts circuit performance, especially due to Negative Bias Temperature Instability (NBTI) effect. A growing number of physical defects manifest themselves as delay faults (at production, or during product lifetime). On-chip, on-line delay monitoring, as a circuit failure prediction technique, can be an attractive solution to guarantee correct operation in safety–critical applications. Safe operation can be monitored, by predictive delay fault detection. A delay monitoring methodology and a novel delay sensor (to be selectively inserted in key locations in the design and to be activated according to user’s requirements) is proposed, and a 65 nm design is presented. The proposed sensor is programmable, allowing delay monitoring for a wide range of delay values, and has been optimized to exhibit low sensitivity to PVT and aging-induced variations. Two MOSFET models—BPTM and ST—have been used. As abnormal delays can be monitored, regardless of their origin, both parametric variations and physical defects impact on circuit performance can be identified. Simulation results show that the sensor is effective in identifying such abnormal delays, due to NBTI-induced aging and to resistive open defects.     

Suppression of phonon‐mediated hot carrier relaxation in type‐II InAs/AlAsxSb1 − x quantum wells: a practical route to hot carrier solar cells

InAs/AlAs_xSb_{1 − x} quantum wells are investigated for their potential as hot carrier solar cells. Continuous wave power and temperature‐dependent photoluminescence indicate a transition in the dominant hot carrier relaxation process from conventional phonon‐mediated carrier relaxation below 90 K to a regime where inhibited radiative recombination dominates the hot carrier relaxation at elevated temperatures. At temperatures below 90 K, photoluminescence measurements are consistent with type‐I quantum wells that exhibit hole localization associated with alloy/interface fluctuations. At elevated temperatures, hole delocalization reveals the true type‐II band alignment, where it is observed that inhibited radiative recombination due to the spatial separation of the charge carriers dominates hot carrier relaxation. This decoupling of phonon‐mediated relaxation results in robust hot carriers at higher temperatures, even at lower excitation powers. These results indicate type‐II quantum wells offer potential as practical hot carrier systems. Copyright © 2016 John Wiley & Sons, Ltd.     

A survey on nonlinear analog-to-digital converters

This paper presents a survey on Nonlinear Analog-to-Digital converters (ADC). This class of converters is extremely relevant in applications where there is a need for non-uniform quantization characteristic, for example, some specific applications in the areas of light detection, hearing aid, nuclear physics, image acquisition, communication systems, etc. This survey outlines the state-of-the-art Nonlinear ADC topologies, such as, floating point, logarithmic, piecewise linear and oversampled nonlinear converters, and discusses their performance and advantages in terms of their applications.     

Light-Controlled Nanosystem with Size-Flexibility Improves Targeted Retention for Tumor Suppression

Although great promise has been achieved with nanomedicines in cancer therapy, limitations are still encountered, such as short retention time in the tumor. Herein, a nanosystem that can modulate the particle size in situ by near-infrared (NIR) light is self-assembled by cross-linking the surface-modified poly(lactic-co-glycolic acid) from the up-conversion nanoparticle with indocyanine green and doxorubicin–nitrobenezene–polyethylene glycol (DOX–NB–PEG). The nanosystem with its small size (≈100 nm) achieves better tumor targeting, while the PEG on the surface of the nanosystem can effectively shield the adsorption of proteins during blood circulation, maintaining a stable nanostructure and achieving good tumor targeting. Moreover, the nanosystem at the tumor realizes the rapid shedding of PEG on its surface by NIR irradiation, and the enhanced cellular uptake. At the same time, aggregation occurs inside the nanosystem to form bigger particles (≈600 nm) in situ, prolonging the retention time at the tumor and producing enhanced targeted therapeutic effects. In vitro data show higher cellular uptake and a higher rate of apoptosis after irradiation, and the in vivo data prove that the nanosystem have a longer residence time at the tumor site after NIR irradiation. This nanosystem demonstrates an effective therapeutic strategy in targeted synergistic tumors.     

Design and Test of a Certifiable ASIC for a Safety-Critical Gas Burner Control System

The purpose of this paper is to present a methodology and tools for the design and test of an EN298 compliant ASIC chip for a safety-critical gas burner control system. Safe operation, as far as the critical variable is concerned, is guaranteed in the presence of two simultaneous faults. Emphasis is put on circumventing methodology, EDA (Electronic Design Automation) and foundry limitations and on product certification requirements.     

Second-order statistics of maximal-ratio and equal-gain combining in Weibull fading

Exact expressions for the level crossing rate and average fade duration of M-branch equal-gain and maximal-ratio combining systems in a Weibull fading environment are presented. The expressions apply to unbalanced, nonidentical, independent diversity channels. In addition, new closed-form solutions for some special cases are obtained.     

In vitro and in vivo determinations of sun protection factors of sunscreen lotions with octylmethoxycinnamate

The aim of this work was to evaluate the correlation between in vitro and in vivo determinations of sun protection factors (SPF) of sunscreen lotions containing the synthetic sunscreen octyl methoxycinnamate. Three sunscreen lotions containing either 2, 4.5 or 7.5% octyl methoxycinnamate were prepared. The in vitro SPFs of these sunscreen lotions were determined according to the spectrophotometric method of Mansur et al. The in vivo SPF values were determined according to the Food and Drug Administration (FDA) method. The results indicate that there was a good correlation between the in vitro and in vivo determinations for the sunscreen lotions examined.