Peridynamic modeling of concrete structures

The peridynamic model described in Silling (Silling, S.A., 1998. Reformation of Elasticity Theory for Discontinuous and Long-Range Forces, SAND98-2176. Sandia National Laboratories, Albuquerque, NM), being a central-force model, is limited to modeling materials with a Poisson's ratio of 1/4. In this paper, the peridynamic model is generalized by adding pairwise peridynamic moments to simulate linear elastic materials with varying Poisson's ratios. The new model is called the “micropolar peridynamic model”. The micropolar peridynamic model is placed within a finite element context to enable efficacious application of boundary conditions and efficient computational solutions using an implicit, rather than an explicit solution algorithm. The implicit solution algorithm is suitable for quasistatic simulation of damage and cracking in concrete structures. With this new model, very simple tensile damage mechanisms at the micro structural (peridynamic) level are sufficient to explain a great deal of the microcracking (damage) and fracture mechanics observed in concrete structures. The new implementation appears to be computationally efficient.     

Non-invasive headspace measurement for characterizing oxygen-scavenging in polymers

A non-invasive headspace analysis method to measure rate and amount of oxygen uptake in oxygen-scavenging polymers is presented. Oxygen uptake data for metal-catalyzed poly(1,4-butadiene) at 30 °C are provided to illustrate the method. These data were obtained by measuring oxygen headspace concentration above the scavenging polymer with an OxySense^® 200T non-invasive oxygen sensor, and, for comparison, oxygen uptake was measured with an analytical balance. Excellent agreement was observed between these two independent experiments.     

Obituaries: Elizabeth Douvan (1926-2002).

Presents an obituary for Elizabeth Douvan (1926-2002). Douvan was a pioneer in the study of changing gender, work, and family roles; personal values; and well-being in the second half of the 20th century. Through her research, she contributed to the interdisciplinary fields of social psychology and women's studies while building and strengthening institutions that remain committed to the same mission. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

PHR2 of Candida albicans encodes a functional homolog of the pH-regulated gene PHR1 with an inverted pattern of pH-dependent expression

Deletion of PHR1, a pH-regulated gene of Candida albicans, results in pH-conditional defects in growth, morphogenesis, and virulence evident at neutral to alkaline pH but absent at acidic pH. Consequently, we searched for a functional homolog of PHR1 active at low pH. This resulted in the isolation of a second pH-regulated gene, designated PHR2. The expression of PHR2 was inversely related to that of PHR1, being repressed at pH values above 6 and progressively induced at more acidic pH values. The predicted amino acid sequence of the PHR2 protein, Phr2p, was 54% identical to that of Phr1p. A PHR2 null mutant exhibited pH-conditional defects in growth and morphogenesis analogous to those of PHR1 mutants but manifest at acid rather than alkaline pH values. Engineered expression of PHR1 at acid pH in a PHR2 mutant strain and PHR2 at alkaline pH in a PHR1 mutant strain complemented the defects in the opposing mutant. Deletion of both PHR1 and PHR2 resulted in a strain with pH-independent, constitutive growth and morphological defects. These results indicate that PHR1 and PHR2 represent a novel pH-balanced system of functional homologs required for C. albicans to adapt to environments of diverse pH.     

Tissue fixation security in transosseous rotator cuff repairs: a mechanical comparison of simple versus mattress sutures

The primary purpose of this investigation was to compare tissue fixation security by simple sutures versus mattress sutures in transosseous rotator cuff repair. These two repair techniques were each performed in 17 human cadaver shoulders, with two bone tunnels being used for the repair by two simple sutures and two other bone tunnels being used for the repair by one mattress suture. The repairs were loaded to failure in a servohydraulic materials test system. Rotator cuff repair by simple sutures was found to be significantly stronger than repair by mattress sutures (P = .0007). The average ultimate load to failure for the simple suture construct (189.62 N) was 39.72% greater than that for the mattress suture construct (135.71 N). Most of the failures occurred by suture breakage at the knot. Load-sharing by multiple suture tails and multiple knots in the simple suture configuration likely contributed to its superior strength characteristics compared with the mattress suture configuration.     

Spatial distribution of femoral bone mineral in dual energy X-ray absorptiometry images: a possible technique to improve discrimination between normal and osteoporotic patients

The measurement of bone mineral density (BMD) using dual energy X-ray absorptiometry (DXA) provides an indicator of subsequent risk of hip fracture, but because of the significant overlap of measurements obtained from osteoporotic and control groups its predictive power is limited. The radiographic technique of Singh grading for the assessment of femoral osteoporosis utilizes information about the distribution of trabecular bundles, but the morphological information available in the DXA image has not previously been analysed. In this study of DXA images from 64 individuals (32 controls and 32 classified as osteoporotic) a subjective grading technique analogous to Singh grading is proposed, and quantitative measurements are made of image features corresponding to two of the categories. Discrimination was assessed using receiver operating characteristic (ROC) curves: the best discrimination was by spinal BMD (Az = 0.85 +/- 0.05) a performance equalled by one of the new parameters; the subjective grading method (Az = 0.79 +/- 0.07) performed as well as measurements of BMD in the femur. These results suggest that although the alternative measures do not improve on the discrimination possible using spinal BMD, morphological information from the hip itself may in the future have a place in the assessment of bone quality.     

A comparative study of color measurement lntstrumentation

A multiplant Quality Improvement Team [QIT] was firmed to develop and implement an evaluation program for various color measurement .systems as potential replacements for the then-current aging systems. The emphasis qf this article is the analytical methodology utilized to evaluate the various color systems. The evaluation program consisted cf two phases. Phase I was a general overview/review of several systems, while Phase II was an extensive internal comparative evaluation measurement systems. These were Milton-Roy's ColorMate HDS, HunterLab's Ultrascan, Datacolor's CS-5, and BYK-Gardner's The Color Sphere [TCS]. The main comparison criteria were interinstrument agreement [agreement between two instruments ofthe same system], user-friendly software and computer interface capability, vendor amenability to a long-term logistical and maintenance relationship, and price. All systems were evaluated by duplicate measurements on various color tiles, yarns, and polymer flakes-over 1600 measurements on each system. The systems were compared with an instrument matrix, a decision matrix, and a product matrix. The instrument matrix was a comparison qfinstrument parameters, software/math treatments, and economics. The decision matrix was a forced ranking of each system by each criteria category [1–4 scale, with 1 representing the best and 4 representing the worst]. The product matrix accentuated the relative importance ofone criterion category over another by multiplying the forced ranking by the criticality of the category. The criticality of a given category wus determined by consensus within the QIT. Thr combination qf the three matrices allowed the evaluator[.s] t o select the color rneasuremmt system that best satixfied the color measurement needs and requirements of their facility and their products. For this evaluation, all ofthe evaluated systems were superior to the then-current agingsystems. As a result of this methodology, one instrument emerged as clearly superior. © 1994 John Wrley & Sons, Inc.