Flow stress and softening behavior of wrought magnesium alloy AZ31B at elevated temperature

1　INTRODUCTIONThewroughtmagnesiumalloyshaveexcellentspecificstrengthandstiffness ,machinability ,dampcapacity ,dimensionalstability ,lowmeltingcostsandare ,hence ,veryattractiveinsuchapplicationsasau tomobile ,aviation ,electronicandcommunicationin dustry[16 ] .Investigationsontheflowstressandsofteningbehaviorofmagnesiumalloysathigherformingtem peratureandstrainratehavebeenanimportantsub jectinwroughtmagnesiumalloysforming[710 ] .InthispapertheflowstressandsofteningbehaviorofAZ31Bdeform…     

焦粉粒度对烧结混合料制粒的影响

摘要：研究了焦粉粒度对烧结混合料制粒的影响,包括焦粉在制粒小球中的分布规律与混合料制粒效果。结果表明：粒度小于0.5mm焦粉主要起黏附粉作用,较为均匀地黏附到各粒级制粒小球中;粒度在0.5~1mm的焦粉作为核颗粒,分布在0.5~1mm、1~3mm制粒小球中的占比总和为81.3%,部分以共核形式存在于3~5mm及以上粒级的制粒小球中;粒度在1~3mm及以上粒级焦粉作为核颗粒分布于相同粒级与大一粒级的制粒小球中;粒度在1~3mm及以上粒级焦粉对烧结混合料制粒无明显影响,粒度小于1mm的焦粉会提高制粒后混合料中小粒径制粒小球的含量,不利于混合料制粒,应尽可能减少焦粉中粒度在05~1mm的含量,将焦粉中粒度小于0.5mm的质量分数控制在20%~30%。     

STUDY OF INTERFACES AND SURFACES OF YBa_2Cu_3O_(7-x)-Ag

Interfaces and surfaces of YBa_2Cu_3O_(7-x)(YBCO)-Ag have been studied by SEM-EDXand AES.No effect of Ag on 123 structure in X-ray diffraction pattern was observedfor 0.4 mol Ag doped YBCO.AES analysis indicated that Ag segregated on surfaceof YBCO and resulted in decrease of YBCO-metal lead resistance.In addition,solutionand segregation of Ag as elemental state were often appeared on interfaces and surfacesof high temperature annealed YBCO,whether elemental Ag or compound Ag_2O andAgNO_3 adopted as doping material.     

印刷线路板电镀废水综合治理

简述线路板电镀废水中氰、铜氨、油墨废水治理方法和混合废水综合治理工艺流程及原理。     

飞剪机定尺控制系统的PID调节

介绍了飞剪机的定尺控制系统,给出了定尺控制系统的结构框图,对控制系统的PID调节器运用试凑法进行了参数整定。     

模式飞剪剪切能力分析

通过对热轧精整厚板生产线模式飞剪剪切力在线测试,结合理论计算分析了飞剪的剪切能力,同时采用有限元对刀片和刀架强度、变形进行计算分析,指出现有飞剪存在的问题,为下一步改造提供依据.     

Preparation and mechanical properties of Fe_3Al/Al_2O_3 nano-/micro-composite

1　INTRODUCTIONAlumina(Al2 O3)ceramicsareoftenconsideredforstructuralapplications,duetotheirpropertiesofhighhardness ,chemicalandwearresistanceandgoodmechanicalpropertiesatroomandhightemperature .Thewellknownlimitationfortheseceramics ,how ever ,istheverylowtoughness .Recentstudieshaveshownsignificantimprovementsinmechanicalprop erties ,includingtoughness ,byaddingductilesecondphaseparticles ,suchasNi,Al,MoandCu[14 ] .Anincreaseof 80 % 333%inthefracturetoughnesshasbeenreportedforAl2 O3…     

Synthesis and electrochemical properties of Th-doped LiMn2O4 powders for lithium-ion batteries

To improve the cycle performance of eco-friendly and cost-effective spinel LiMN2O4 as the Li secondary batteries, the Th-doped LiThxMn1-xO4 spinel powers were synthesized by solid-state method. The starting materials, Li2CO3,MnO2 and Th(NO3)4·4H2O, were mixed uniformly using a traditional ball milling, which resulted in a uniform particle size distribution in the mixed powers. Tests of X-ray diffraction, SEM, impedance spectra and charge-discharge were carried out for LiThxMn1-xO4 cathode materials. Results show that the synthesized LiTh0.01Mn1.99O4 material exhibits standard spinel structure, regular particle morphology and excellent property of charge-discharge for big current. The capacity retention of the material modified by doping Th is more than 85.1% of the first discharge specific capacity of 111.5 mAh·g -1 after 20 cycles at the current rate 1C, while the pristine LiMN2O4 is only 57% of the first discharge specific capacity of 110.2 mAh·g-1 after the same cycles at the same current rate.     

铁精矿粒度对球团强度的影响

以大红山、曼南坎和滇滩等精矿的粒度以及膨润土用量和润磨时间为因子,以生球落下强度、生球爆裂温度、预热球抗压强度和焙烧球抗压强度为评价指标,进行了五因子二次回归组合实验研究。结果表明:随着铁精矿小于0.074mm粒级含量的增加,生球爆裂温度下降,预热球和焙烧球抗压强度提高;当铁精矿小于0.074mm粒级含量小于75%(质量分数)时,生球落下强度逐渐上升,当小于0.074mm粒级含量为75%时,生球落下强度达到最大值,之后有下降趋势。并不是铁精矿粒度越细球团强度就会越好,铁精矿粒度还应该满足一个合适的粒度组成。     

一种新的变轴数控机床标定方法

本文论述了国内外并联数控机床所采用的标定方法，选择了序列法进行了标定试验。但在实际标定过程中，出现了部分数据误差较大的问题，本文针对所面临的问题，提出了数值逼近法，并应用到实际机床的标定中，获得了机床的相关参数。之后，通过数学模型的计算值和实际测量值对比，验证了数据的可靠性，从而验证了方法的可行性和正确性。