基于充电设施型谐波补偿的研究及应用

本文通过对充电设施工作产生的谐波分析及仿真,得出采用基于SPWM脉宽调制闭环指令电流的跟踪控制方法,采用闭环能量回馈方案的装置对充电设施谐波补偿的高精度控制进行验证,有效检测抵消充电设施引起的谐波,实现对充电设施谐波污染的治理,提升电能质量。     

玻璃钢筋混凝土的有限元计算与试验

钢筋混凝土广泛应用于土木工程领域，但其结构耐久性因钢筋本身的锈蚀成为现今急待解决的问题。人们一直在寻找对钢筋混凝土进行改良的途径，用玻璃钢筋代替普通钢筋是解决这一问题的一个有效的方法，为此进行了试验和ANSYS有限元分析，结果证明此法具有可行性。     

油水井化学封窜堵漏新工艺

通过分析中原油田注水开发的两大问题，阐明了新型堵剂YLD-1的适应性，结合室内试验，重点分析了该堵剂的性能特点，深入探讨了封窜堵漏的选井原则和施工工艺，经过在文留油田的现场应用，展示了该技术良好的发展前景。     

高效液相色谱法在氟铃脲标准样品制备中的应用研究

标准样品是农残分析巾的必要条件。应用高效液相色谱法进行氟铃脲的纯化、制得氟铃脲标准样品，用DELTA PAK C18柱，以乙腈-水(68：32)为流动相，在波长254nm，室温下进行了保留值定性、定值分析、均匀性及稳定性考察，效果良好。     

陶瓷坯体增强剂聚丙烯酸钠在艺术瓷成形过程的应用

本文合成了一系列不同相对分子质量的聚丙烯酸钠,应用于艺术瓷的坯体中,研究了聚丙烯酸钠对艺术瓷坯体强度、变形率的影响,并对聚丙烯酸钠增强机理进行了探讨。结果表明:聚丙烯酸钠可有效地提高艺术瓷坯体的成形强度,减少了坯体的变形率,当增强剂c加入的质量分数为0.6%时,坯体的干燥强度增加率达167.5%,坯体的变形率从50%降低到10%。     

A survey of traffic-based routing metrics in family of expected transmission count for self-organizing networks

Self-Organizing Networks (SONs) are attractive for applications where flexibility, resilience, and a large network service area are required. In order to meet the requirements of those applications, the principal issue is to guarantee efficient routing in SONs. Hence, the design and selection of appropriate routing metrics is important. A mass of metrics have been proposed in the past several decades. Among all the metrics, Expected Transmission Count (ETX) has drawn the most attention. Since the proposal of ETX, many ETX-based or extended metrics have been proposed. ETX and its descendants compose the ETX family. This paper is an attempt to analyze, compare and summarize traffic-based routing metrics in the ETX family. Details of each routing metric are presented and analyzed. Some of our viewpoints on the principal for designing metrics in SONs are presented.     

MACROPROCESS OF PARTICLE FORMATION IN SUSPENSION POLYMERIZATION OF STYRENE WITH INORGANIC STABILIZER SYSTEM

The macroprocess of particle formation from suspension droplets of styrene in a pdymerizationsystem was investigated.Inorganic hydroxyapatite or its mixture with polyvinyl alcohol as thepolymerization system was used.Those items such as the effects of the Weight fraction of dispersed-phase,the amount of the inorganic stabilizer and the agitation speed on the breakup and coalescence of thetransient dispersed drops etc.Were examined.Results showd that the dynamic behavior of the transi-ent polymer droplets changed in the presence of the suspension stabilizer during the reaction.     

(α-MS)S-B-(α-MS)S三嵌段共聚物的合成及其结构与性能

以α-甲基苯乙烯(α-MS),苯乙烯(S)和丁二烯(B)为单体,采用两步聚合偶合法,先将α-MS,S,THF及n-BuLi于30℃下聚合1h,再加入环己烷和B,于50℃下聚合4h,最后加入偶合剂苯甲酸苯酯,反应2～3h,即得到(α-MS)S-B-(α-MS)S三嵌段热塑性弹性体。该共聚物经GPC,IR,UV,NMR,DSC等表征,(?)_n=(10～13)×10~4,(?)_w/(?)_n=1.1～1.3;当硬段/软段为30/70(质量比)时,软段中1,4-结构含量为70％～85％,形态具有相分离特征,随α-MS/S值的增加,硬段T_g可在90～160℃调节,其力学性能有一定的改善,并接近或超过SBS热塑性弹性体。     

削弱或抑制抗氧剂、光稳定剂作用的有关因素

介绍了削弱或抑制抗氧剂、光稳定剂作用的常见因素及实例，分析了防老化塑料制品发生提前老化现象的可能性和原因。