Synergistic Roll‐to‐Roll Transfer and Doping of CVD‐Graphene Using Parylene for Ambient‐Stable and Ultra‐Lightweight Photovoltaics

A roll‐to‐roll (R2R) transfer technique is employed to improve the electrical properties of transferred graphene on flexible substrates using parylene as an interfacial layer. A layer of parylene is deposited on graphene/copper (Cu) foils grown by chemical vapor deposition and are laminated onto ethylene vinyl acetate (EVA)/poly(ethylene terephthalate). Then, the samples are delaminated from the Cu using an electrochemical transfer process, resulting in flexible and conductive substrates with sheet resistances of below 300 Ω sq^?1, which is significantly better (fourfold) than the sample transferred by R2R without parylene (1200 Ω sq^?1). The characterization results indicate that parylene C and D dope graphene due to the presence of chlorine atoms in their structure, resulting in higher carrier density and thus lower sheet resistance. Density functional theory calculations reveal that the binding energy between parylene and graphene is stronger than that of EVA and graphene, which may lead to less tear in graphene during the R2R transfer. Finally, organic solar cells are fabricated on the ultrathin and flexible parylene/graphene substrates and an ultra‐lightweight device is achieved with a power conversion efficiency of 5.86%. Additionally, the device shows a high power per weight of 6.46 W g^?1 with superior air stability.     

Assurance of energy efficiency and data security for ECG transmission in BASNs

With the technological advancement in body area sensor networks (BASNs), low cost high quality electrocardiographic (ECG) diagnosis systems have become important equipment for healthcare service providers. However, energy consumption and data security with ECG systems in BASNs are still two major challenges to tackle. In this study, we investigate the properties of compressed ECG data for energy saving as an effort to devise a selective encryption mechanism and a two-rate unequal error protection (UEP) scheme. The proposed selective encryption mechanism provides a simple and yet effective security solution for an ECG sensor-based communication platform, where only one percent of data is encrypted without compromising ECG data security. This part of the encrypted data is essential to ECG data quality due to its unequally important contribution to distortion reduction. The two-rate UEP scheme achieves a significant additional energy saving due to its unequal investment of communication energy to the outcomes of the selective encryption, and thus, it maintains a high ECG data transmission quality. Our results show the improvements in communication energy saving of about 40%, and demonstrate a higher transmission quality and security measured in terms of wavelet-based weighted percent root-mean-squared difference.     

Towards the performance evaluation of 4th generation wireless communication standards: LTE versus Mobile WiMAX

Advances in wireless communication protocols and networking toward support of the next generation of mobile and radio broadband technologies have contributed to a strong competition among various telecommunication standards in particular Long Term Evolution (LTE) and Mobile Worldwide Interoperability for Microwave Access (WiMAX). In this paper, we provide an in‐depth comparison analysis of LTE and Mobile WiMAX at the physical (PHY) layer by studying the most similar PHY configuration scenarios for these two technologies. Our study includes a throughput analysis of downlink (DL) and uplink (UL) transmissions in time division duplex with the least overhead possible and different antenna schemes as well as modulation and code rates. This study also performs an overhead analysis in both protocols to provide a more in‐depth understanding of the PHY layer capacity in various PHY layer configurations. Our simulation results generally show higher performance for LTE in both DL and UL transmission with 7 Mbps in DL and 5 Mbps in UL, when using one antenna port. However, by increasing the number of antennas for multiple‐input/multiple‐output configurations, the results illustrate a reduction in the performance of LTE compared to Mobile WiMAX. This arises from the increase in reference signal overhead in LTE from 4.7% in single‐input/single‐output (SISO) to 14.28% in 4 × 4 multiple‐input/multiple‐output (MIMO). Copyright © 2013 John Wiley & Sons, Ltd.     

Partikelcharakterisierung in hochkonzentrierten Dispersionen – Grundlegende Untersuchungen zu einer neuen Ultraschallmethode

A new method for inline characterization of particles in high concentrated dispersions by ultrasonic backscattering is described, that is sensitive against particle size and concentration. Analyzing the backscattering signal yields the sound attenuation as well as a scattering intensity equivalent. The measurement can be performed without sampling and minimally invasive directly in the process.     

Liquid flow and phase holdup—measurement and CFD modeling for two-and three-phase bubble columns

Bubble columns are an important class of contacting devices in chemical industry and biotechnology. Their simple setup makes them ideal reactors for two- and three-phase operations such as fermentations or heterogeneous catalysis. Still, design and operation of these reactors is subject to widely empirical scale-up strategies. With recent advances in the development of measurement techniques, a more detailed approach to the development of optimized reactors for specific operations should become possible. This report is based on detailed measurements of local dispersed phase holdups in a pilot plant-sized bubble column operated at high superficial gas velocities and solid holdups. It deals with the influence of superficial gas velocity, solid loading and sparger geometry on measured and computed liquid flow velocities and holdup distributions. Liquid velocity measurements have been performed using the electrodiffusion method, modeling calculations have been carried out using the computational fluid dynamics (CFD) code CFX-4.3. Measurement results presented here give an insight into the development of liquid circulation and fluctuating velocity distribution depending on superficial gas velocity, solid loading and sparger geometry. CFD results implementing a multi-fluid model with k-ε turbulence and special momentum exchange terms for direct gas-solid interactions show that, even on standard PC workstations, this kind of computations can deliver qualitatively reasonable agreement with measurements.     

Recent Advances in Intracellular and In Vivo ROS Sensing: Focus on Nanoparticle and Nanotube Applications

Reactive oxygen species (ROS) are increasingly being implicated in the regulation of cellular signaling cascades. Intracellular ROS fluxes are associated with cellular function ranging from proliferation to cell death. Moreover, the importance of subtle, spatio-temporal shifts in ROS during localized cellular signaling events is being realized. Understanding the biochemical nature of the ROS involved will enhance our knowledge of redox-signaling. An ideal intracellular sensor should therefore resolve real-time, localized ROS changes, be highly sensitive to physiologically relevant shifts in ROS and provide specificity towards a particular molecule. For in vivo applications issues such as bioavailability of the probe, tissue penetrance of the signal and signal-to-noise ratio also need to be considered. In the past researchers have heavily relied on the use of ROS-sensitive fluorescent probes and, more recently, genetically engineered ROS sensors. However, there is a great need to improve on current methods to address the above issues. Recently, the field of molecular sensing and imaging has begun to take advantage of the unique physico-chemical properties of nanoparticles and nanotubes. Here we discuss the recent advances in the use of these nanostructures as alternative platforms for ROS sensing, with particular emphasis on intracellular and in vivo ROS detection and quantification.     

Use of cardiopulmonary bypass to salvage patients with multiple-chamber heart wounds

BACKGROUND: The need for cardiopulmonary bypass in the treatment of penetrating heart injuries is debated. OBJECTIVES: To review our experience with penetrating heart injuries and determine the indications and outcome for cardiopulmonary bypass. DESIGN: Retrospective review. SETTING: A university-based, level I trauma center. PATIENTS: All victims of penetrating heart injury presenting between July 1, 1989, and December 31, 1995. METHODS: Medical records were reviewed for demographic and physiological data, operative findings, and outcome. RESULTS: Overall survival for 106 patients with penetrating heart injury was 55%. In an effort to resuscitate the heart, 4 patients with unresponsive cardiogenic shock were placed on cardiopulmonary bypass; none survived. Of 30 patients with multiple-chamber injuries, 11 presented with signs of life and 7 survived. Cardiopulmonary bypass was essential to repair complex injuries in 2 of the 7 survivors. CONCLUSION: Cardiopulmonary bypass was ineffective in salvaging patients with cardiogenic shock but was essential in some patients with complex multiple-chamber cardiac injuries that could not be exposed and repaired by other means.     

Repeatability and reproducibility estimates from collaborative studies based on total concentration of trace analytes

In the process of validating a given analytical method for the total concentration of a trace analyte, the precision indicators, repeatability and reproducibility, are obtained from a collaborative study of the method based on a standard one-way completely randomized model. This report discusses the shortcomings of the statistical models used in such studies, defines the component makeup for estimates of the repeatability and reproducibility variances based on these models, and considers suggestions offered as new policy regarding method performance based on total concentration.