Effect of the marine environment on reinforced concrete durability in Iberoamerican countries: DURACON project/CYTED

This work presents some of the results from the project: “Effect of the environment on reinforcement durability” (DURACON) in its first two-years period, which investigates the influence of urban and marine meteorochemical parameters on the performance of reinforced concrete structures. The results presented in this investigation are from 21 marine test sites only (no urban environments are included), distributed among 11 countries (Argentina, Bolivia, Brazil, Chile, Colombia, Costa Rica, Mexico, Spain, Uruguay, Portugal and Venezuela). The environment was evaluated using ISO Standard 9223 and the concrete was characterized by measuring compressive strength, elastic modulus, total and effective porosity, chloride permeability according to ASTM standards, as well as the effective porosity and resistance to water absorption using the Fagerlund method. To that effect, concrete specimens (with and without reinforcement) were prepared for electrochemical and physical/mechanical/chemical tests using the existing materials in each participating country, following strict procedures which enabled the preparation of similar concrete samples. Two water/cement (w/c) ratios (0.45 and 0.65) were selected, where the concrete with 0.45 w/c ratio had to have a minimum cement content of 400 kg/m³ and the one with 0.65 w/c ratio a compressive strength of 210 kg/cm². Type I Portland cement, siliceous sand, and crushed rock as coarse aggregates (13-mm maximum nominal size) were used. After a one-year exposure, the results of the corrosion potentiality and probability analysis of the reinforcement in the different test stations showed that, for marine atmospheres, the most aggressive environment to induce steel corrosion was at Portugal’s Cabo Raso station, and the least aggressive one was at Chile’s Valparaíso station. These results are comparable with the ones found using electrochemical measurements, after a two-year exposure.     

Non-Pauli observables for CWS codes

It is known that nonadditive quantum codes can have higher code dimensions than stabilizer codes for the same length and minimum distance. The class of codeword stabilized codes (CWS) provides tools to obtain new nonadditive quantum codes by reducing the problem to finding nonlinear classical codes. In this work, we establish some results on the kind of non-Pauli operators that can be used as observables in the decoding scheme of CWS codes and propose a procedure to obtain those observables.     

Designing an extensible architecture for Personalized Ambient Information

Ambient displays provide us with information in the background of our awareness. However, as each user has individual wishes and needs of how, which and when information is presented, the acceptance of ambient displays is low.In this paper we introduce an extensible architecture for personalized ambient information.We employ a notification system to extend the capability of a fixture to display more than one variable. Multiple variables can be updated by multiple information providers. Thereby, our architecture covers a broader spectrum of notifications from alarms to ambient information.We evaluate our concept within a dual-task experiment in comparison to preset notifications. The results show a level of self-interruption which is significantly lower than using preset notifications. Therefore our approach outperforms preset notifications and moves ambient displays closer to secondary displays in human–computer interaction.     

Incidence of different pork quality categories in a Portuguese slaughterhouse: A survey

This study was designed to evaluate the incidence of the PSE/DFD status in a Portuguese pig slaughterhouse, covering two seasons of the year (spring and summer) in order to find out if the proportions of those poor meat quality categories were sufficient to concern the meat industry. Meat quality classification was based on the measurements of the pH(60), pH(24), drip losses and colour (L, a, b) in the longissimus dorsi muscle (between the last third and fourth ribs) of 380 pigs randomly chosen from the line. The high global incidence of PSE and likely PSE (30%) as well as DFD (10%) carcasses and the enormous variation of the meat quality between the different days of analysis proves that the pig population presents a great variation of halothane genotype and that handling procedures have to be optimized in order to decrease stress and glycogen store depletion. The percentage of PSE carcasses during the summer season was double that found in the spring, probably due to a higher environmental temperature and relative humidity.     

A semi-automatic strategy for achieving learning content and practice repurposing

The development of instructional content using Information Technologies is an expensive, time-consuming and complex process that requires new methodologies. It was in this context that the concept of Learning Objects (LOs) was proposed in order to promote reuse. However, this goal is not yet fully attained and new contributions to increase reuse are still welcome. Besides, if content is conveyed in LOs that are easier to reuse, they must be combined and sequenced in order to build more elaborated and complex content. This paper presents a strategy to deal with these problems based on the definition of small LOs here called Component Objects (COs). These COs are structured and combined according to a conceptual metamodel, which is the basis for the definition of conceptual schemas representing the existing material, including not only content but also practice. This strategy for searching, extracting, and sequencing COs, supports a teacher to better control the implementation of complex content, reducing errors in the authoring process. This approach includes a specification language and an algorithm for semi-automatic sequencing learning content and practice. Finally, a case study that shows the proposed approach and some results of using the algorithm are presented.     

Decentralized MDPs with sparse interactions

Creating coordinated multiagent policies in environments with uncertainty is a challenging problem, which can be greatly simplified if the coordination needs are known to be limited to specific parts of the state space. In this work, we explore how such local interactions can simplify coordination in multiagent systems. We focus on problems in which the interaction between the agents is sparse and contribute a new decision-theoretic model for decentralized sparse-interaction multiagent systems, Dec-SIMDPs, that explicitly distinguishes the situations in which the agents in the team must coordinate from those in which they can act independently. We relate our new model to other existing models such as MMDPs and Dec-MDPs. We then propose a solution method that takes advantage of the particular structure of Dec-SIMDPs and provide theoretical error bounds on the quality of the obtained solution. Finally, we show a reinforcement learning algorithm in which independent agents learn both individual policies and when and how to coordinate. We illustrate the application of the algorithms throughout the paper in several multiagent navigation scenarios.     

Generating heavy particles with energy and momentum conservation

We propose a novel algorithm, called REGGAE, for the generation of momenta of a given sample of particle masses, evenly distributed in Lorentz-invariant phase space and obeying energy and momentum conservation. In comparison to other existing algorithms, REGGAE is designed for the use in multiparticle production in hadronic and nuclear collisions where many hadrons are produced and a large part of the available energy is stored in the form of their masses. The algorithm uses a loop simulating multiple collisions which lead to production of configurations with reasonably large weights.

Program summary

Program title: REGGAE (REscattering-after-Genbod GenerAtor of Events)Catalogue identifier: AEJR_v1_0Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEJR_v1_0.htmlProgram obtainable from: CPC Program Library, Queen?s University, Belfast, N. IrelandLicensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.htmlNo. of lines in distributed program, including test data, etc.: 1523No. of bytes in distributed program, including test data, etc.: 9608Distribution format: tar.gzProgramming language: C++Computer: PC Pentium 4, though no particular tuning for this machine was performed.Operating system: Originally designed on Linux PC with g++, but it has been compiled and ran successfully on OS X with g++ and MS Windows with Microsoft Visual C++ 2008 Express Edition, as well.RAM: This depends on the number of particles which are generated. For 10 particles like in the attached example it requires about 120 kB.Classification: 11.2Nature of problem: The task is to generate momenta of a sample of particles with given masses which obey energy and momentum conservation. Generated samples should be evenly distributed in the available Lorentz-invariant phase space.Solution method: In general, the algorithm works in two steps. First, all momenta are generated with the GENBOD algorithm. There, particle production is modeled as a sequence of two-body decays of heavy resonances. After all momenta are generated this way, they are reshuffled. Each particle undergoes a collision with some other partner such that in the pair center of mass system the new directions of momenta are distributed isotropically. After each particle collides only a few times, the momenta are distributed evenly across the whole available phase space. Starting with GENBOD is not essential for the procedure but it improves the performance.Running time: This depends on the number of particles and number of events one wants to generate. On a LINUX PC with 2 GHz processor, generation of 1000 events with 10 particles each takes about 3 s.     

An adaptive learning approach for 3-D surface reconstruction from point clouds.

In this paper, we propose a multiresolution approach for surface reconstruction from clouds of unorganized points representing an object surface in 3-D space. The proposed method uses a set of mesh operators and simple rules for selective mesh refinement, with a strategy based on Kohonen's self-organizing map (SOM). Basically, a self-adaptive scheme is used for iteratively moving vertices of an initial simple mesh in the direction of the set of points, ideally the object boundary. Successive refinement and motion of vertices are applied leading to a more detailed surface, in a multiresolution, iterative scheme. Reconstruction was experimented on with several point sets, including different shapes and sizes. Results show generated meshes very close to object final shapes. We include measures of performance and discuss robustness.     

A Framework for Integrating Non-Functional Requirements into Conceptual Models

The development of complex information systems calls for conceptual models that describe aspects beyond entities and activities. In particular, recent research has pointed out that conceptual models need to model goals, in order to capture the intentions which underlie complex situations within an organisational context. This paper focuses on one class of goals, namely non-functional requirements (NFR), which need to be captured and analysed from the very early phases of the software development process. The paper presents a framework for integrating NFRs into the ER and OO models. This framework has been validated by two case studies, one of which is very large. The results of the case studies suggest that goal modelling during early phases can lead to a more productive and complete modelling activity.       

Irrigation infrastructure development in the Limarí Basin in Central Chile: implications for adaptation to climate variability and climate change

One option to deal with climate variability in agriculture is to build irrigation infrastructure, although this may lead to the overdevelopment of water resources, leading to ‘basin closure’. The Limarí Basin, in central north Chile, has relied on irrigation infrastructure over the last 30 years to increase water supply reliability and extend irrigated acreage, especially for permanent crops. This situation has reduced adaptation opportunities in the basin, which is currently experiencing a severe drought that, according to climate change projections, is expected to persist in the future, with important consequences for the sustainability of agriculture production.