Mechanical properties of freely suspended semiconducting graphene-like layers based on MoS2

We fabricate freely suspended nanosheets of molybdenum disulphide (MoS₂) which are characterized by quantitative optical microscopy and high-resolution friction force microscopy. We study the elastic deformation of freely suspended nanosheets of MoS₂ using an atomic force microscope. The Young''s modulus and the initial pre-tension of the nanosheets are determined by performing a nanoscopic version of a bending test experiment. MoS₂ sheets show high elasticity and an extremely high Young''s modulus (0.30 TPa, 50% larger than steel). These results make them a potential alternative to graphene in applications requiring flexible semiconductor materials.PACS, 73.61.Le, other inorganic semiconductors, 68.65.Ac, multilayers, 62.20.de, elastic moduli, 81.40.Jj, elasticity and anelasticity, stress-strain relations.     

Membrane treatment of side-stream cooling tower water for reduction of water usage

A pilot study was conducted to determine whether membrane treatment on a side stream of recirculating cooling-tower water could reduce overall water usage and discharge. The treated permeate was returned to the cooling tower while the concentrate was discharged to the sanitary sewer. Flow rates, pressures and water chemistry were monitored. The pilot demonstrated potential substantial water savings. Maximum make-up water and discharge reduction were 16% and 49%, respectively. As high as possible permeate recovery is needed to maximize water conservation. Silica scaling on the membranes limited water savings in this pilot. Development of membranes with a solute-rejection capacity less than the 92% average of the membranes used in the pilot would assist in optimizing water savings. Decreased water outlays compensated for the additional energy used by membrane treatment. Scaling control is critical for economic operation.     

Reduced Carbon and Energy Footprint in Highway Operations: The Highway Energy Assessment (HERA) Methodology

Global demand for mobility is increasing and the environmental impact of transport has become an important issue in transportation network planning and decision-making, as well as in the operational management phase. Suitable methods are required to assess emissions and fuel consumption reduction strategies that seek to improve energy efficiency and furthering decarbonization. This study describes the development and application of an improved modeling framework – the HERA (Highway EneRgy Assessment) methodology – that enables to assess the energy and carbon footprint of different highways and traffic flow scenarios and their comparison. HERA incorporates an average speed consumption model adjusted with a correction factor which takes into account the road gradient. It provides a more comprehensive method for estimating the footprint of particular highway segments under specific traffic conditions. It includes the application of the methodology to the Spanish highway network to validate it. Finally, a case study shows the benefits from using this methodology and how to integrate the objective of carbon footprint reductions into highway design, operation and scenario comparison.     

Montmorillonite as support for peroxide in the melt grafting of maleic anhydride onto polypropylene

Grafting of maleic anhydride onto polypropylene was performed in a Haake torque rheometer, in the presence of organically modified montmorillonite, MMT (used as support for the peroxide), according to a 2³ factorial design, where the maleic anhydride concentration (C_MA), peroxide concentration (C_per) and reaction time (t_r) were varied. For comparison, the reaction in the absence of MMT was also conducted. Polypropylene degradation was assessed by parallel plate rheometry and size exclusion chromatography (SEC) and percentage of reacted maleic anhydride (%MA_g) was obtained by titration and FTIR spectroscopy. The results showed differences in both systems, conventional and in the presence of MMT. The structure of polypropylene grafted with maleic anhydride, PP‐g‐MA, indicates longer branches are formed in the presence of MMT compared to in its absence, demonstrated by FTIR analysis. As in conventional reaction systems, an increase in C_per caused an increase in %MA_g and a reduction in molar mass. The variable C_MA showed to be not significant in the grafting reaction in the presence of MMT, even at high DCP levels, at a 5% significance level. On the other hand, increase in C_MA resulted in significant increase in viscosity. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 44134.     

基于SR7265硬件的虚拟锁相放大器、频谱仪、阻抗计和半导体参数分析仪

锁相放大器是用来测量微弱信号的专用仪器.即使噪音上千倍于被测信号,通过锁相放大器,也能得到精确结果.随着数字信号处理技术在仪器中的应用,可编程仪器变得越来越灵活.结合虚拟仪器的技术,论文通过对SR7265的硬件重新编程,在同一个硬件上实现了虚拟锁相放大器、虚拟频谱仪、虚拟阻抗计和虚拟半导体参数分析仪等等功能.本虚拟仪器采用了4层的逻辑结构.同样的功能也在一个FPGA板上成功地部署.     

Effect of surface roughness and stainless steel finish on Listeria monocytogenes attachment and biofilm formation

The purpose of this study was to evaluate the effect of surface roughness (Ra) and finish of mechanically polished stainless steel (Ra = 0.26 +/- 0.05, 0.49 +/- 0.10, and 0.69 +/- 0.05 microm) and electropolished stainless steel (Ra = 0.16 +/- 0.06, 0.40 +/- 0.003, and 0.67 +/- 0.02 microm) on Listeria adhesion and biofilm formation. A four-strain cocktail of Listeria monocytogenes was used. Each strain (0.1%) was added to 200 ml of tryptic soy broth (TSB), and coupons were inserted to the mixture for 5 min. For biofilm formation, coupons with adhesive cells were incubated in 1:20 diluted TSB at 32 degrees C for 48 h. The experiment was performed by a randomized block design. Our results show that the level of Listeria present after 48 h of incubation (mean = 7 log CFU/cm2) was significantly higher than after 5 min (mean = 6.0 log CFU/cm2) (P < 0.01). No differences in initial adhesion were seen in mechanically finished (mean = 6.7 log CFU/cm2) when compared with electropolished stainless steel (mean = 6.7 log CFU/cm2) (P > 0.05). Listeria initial adhesion (values ranged from 5.9 to 6.1 log CFU/cm2) or biofilm formation (values ranged from 6.9 to 7.2 log CFU/cm2) was not significantly correlated with Ra values (P > 0.05). Image analysis with an atomic force microscope showed that bacteria did not colonize the complete surface after 48 h but were individual cells or grouped in microcolonies that ranged from 5 to 10 microm in diameter and one to three cell layers in thickness. Exopolymeric substances were observed to be associated with the colonies. According to our results, electropolishing stainless steel does not pose a significant advantage for food sanitation over mechanically finished stainless steel.     

Volatile aldehyde emissions from heated cooking oils

Low molecular weight aldehydes (LMWAs) formed during the heating of frying media (triglycerides) were adsorbed onto tenax and analyzed by GC‐MS after thermal desorption. Six alkanals (C₅ to C₁₀), seven 2‐alkenals (C₅ to C₁₁) and 3 alkadienals (C₇, C₉ and C₁₀) were found in the fumes of canola oil (control), extra virgin olive oil, and refined olive oil, heated at 180 and 240 °C. The emission rates of these aldehydes depended on the heating temperature. Frying in any type of olive oil, independently of its commercial category, will effectively decrease the emission of volatile aldehydes at temperatures below the smoking point. Thus, using the cheaper olive oil for deep‐frying purposes will not affect aldehyde emissions. This is important since olive oil is usually used for deep‐frying operations while extra virgin olive oil is used as salad dressing in Spain. The mixture of refined olive oil with some virgin olive oil is the most acceptable type of olive oil in non‐Mediterranean countries due to its milder flavor. However, if higher temperatures are needed the use of canola oil is more advisable due to its higher smoke point. Copyright © 2004 Society of Chemical Industry