DC and RF performance of GaAs MESFET fabricated on silicon substrate using epitaxial lift-off technique

GaAs MESFETs have been fabricated on a silicon substrate using a molecular beam epitaxy grown film detached from its growth substrate and attached on a silicon substrate covered with a dielectric. The device processing is done on the silicon substrate. The MESFETs exhibit I/sub DSS/=130 mA/mm, g/sub m/=135 mS/mm and for 1.3 mu m gate length unity current gain cut-off frequency f/sub T/ of 12 GHz. Excellent device isolation with subpicoampere leakage currents is obtained.<>     

MOSFET 1/f noise measurement under switched bias conditions

A new measurement setup is presented that allows the observation of 1/f noise spectra in MOSFET's under switched bias conditions in a wide frequency band (10 Hz-100 kHz). When switching between inversion and accumulation, MOSFET's of different manufacturers invariably show reduced 1/f noise power density for frequencies below the switching frequency. At low frequencies (10 Hz), a 5-8 dB reduction in intrinsic 1/f noise power density is found for different devices, largely independent of the switching frequency (up to 1 MHz). The switched bias measurements render detailed wideband 1/f noise spectra of switched MOSFET's, which is useful for 1/f noise model validation and analog circuit design     

Normally Oriented Adhesion versus Friction Forces in Bacterial Adhesion to Polymer‐Brush Functionalized Surfaces Under Fluid Flow

Bacterial adhesion is problematic in many diverse applications. Coatings of hydrophilic polymer chains in a brush configuration reduce bacterial adhesion by orders of magnitude, but not to zero. Here, the mechanism by which polymer‐brush functionalized surfaces reduce bacterial adhesion from a flowing carrier fluid by relating bacterial adhesion with normally oriented adhesion and friction forces on polymer (PEG)‐brush coatings of different softness is studied. Softer brush coatings deform more than rigid ones, which yields extensive bond‐maturation and strong, normally oriented adhesion forces, accompanied by irreversible adhesion of bacteria. On rigid brushes, normally oriented adhesion forces remain small, allowing desorption and accordingly lower numbers of adhering bacteria result. Friction forces, generated by fluid flow and normally oriented adhesion forces, are required to oppose fluid shear forces and cause immobile adhesion. Summarizing, inclusion of friction forces and substratum softness provides a more complete mechanism of bacterial adhesion from flowing carrier fluids than available hitherto.     

An Organoid for Woven Bone

Bone formation (osteogenesis) is a complex process in which cellular differentiation and the generation of a mineralized organic matrix are synchronized to produce a hybrid hierarchical architecture. To study the mechanisms of osteogenesis in health and disease, there is a great need for functional model systems that capture in parallel, both cellular and matrix formation processes. Stem cell-based organoids are promising as functional, self-organizing 3D in vitro models for studying the physiology and pathology of various tissues. However, for human bone, no such functional model system is yet available. This study reports the in vitro differentiation of human bone marrow stromal cells into a functional 3D self-organizing co-culture of osteoblasts and osteocytes, creating an organoid for early stage bone (woven bone) formation. It demonstrates the formation of an organoid where osteocytes are embedded within the collagen matrix that is produced by the osteoblasts and mineralized under biological control. Alike in in vivo osteocytes, the embedded osteocytes show network formation and communication via expression of sclerostin. The current system forms the most complete 3D living in vitro model system to investigate osteogenesis, both in physiological and pathological situations, as well as under the influence of external triggers (mechanical stimulation, drug administration).     

Template patterning of YBa2Cu3O7

We demonstrate the use of thin chromium layers to define structures in YBa₂Cu₃O₇ deposited by laser ablation. The chromium reacts with copper to form an insulating crystalline compound containing copper and chromium in equal amounts. Although the reaction will proceed up to approximately 1 μm into the defined pattern, the formation of a crystalline compound means that the extent of the reaction is limited by the availability of chromium. We have defined large-area, regular grids of tiny chromium pads, yielding a grid of insulating islands of approximately 600 nm in size after YBa₂Cu₃O₇ deposition. Electrical measurements show the influence of such a pattern on the R-T characteristics of the YBa₂Cu₃O₇.     

Design rules for an integratable low-power amplifier/filter combination

In this paper design rules for a circuit topology in which there is an inseparable combination of an amplifier and a filter characteristic, are presented. By intentionally using the capacitance of an already present input sensor for the filtering, the total required integrated capacitance is much less than that in circuits, which have a separately designed amplifier and filter function. Consequently, it is possible to have the advantage of a better integratability. Moreover, less complexity in the design is achieved. The presented circuit shows a current-to-voltage conversion and an inherently controllable second-order low-pass filter characteristic. A discrete realization has been designed to test the circuit. This circuit operates down to a 1 V supply voltage and the transfer shows a 1.8 M currentto-voltage conversion with a bandwidth of 6 kHz. Measurement results of this circuit show that a 63 dB dynamic range can be achieved with a total required integrated capacitance of only 31 pF.     

About the asymptotic accuracy of Barron density estimates

By extending the information-theoretic arguments of previous papers dealing with the Barron-type density estimates, and their consistency in information divergence and chi-square divergence, the problem of consistency in Csiszar's φ-divergence is motivated for general convex functions φ. The problem of consistency in φ-divergence is solved for all φ with φ(0)<∞ and φ(t)=O(t ln t) when t→∞. The problem of consistency in the expected φ-divergence is solved for all φ with tφ(1/t)+φ(t)=O(t²) when t→∞. Various stronger versions of these asymptotic restrictions are considered too. Assumptions about the model needed for the consistency are shown to depend on how strong these restrictions are     

Imaging birds in a bird cage: in-vivo FSE 3D MRI of bird brain

An in-vivo magnetic resonance imaging (MRI) procedure is described that allows one to obtain three-dimensional high quality images of the entire brain of small birds such as the canary (20 g) and the starling (75 g) with an image resolution of 0.1 mm (58-113 μm, dependent on the size of the imaged bird). The entire imaging procedure took about 2 h after which the birds recovered from anaesthesia uneventfully and could be reused for subsequent additional imaging. This non invasive MRI technique enables to correlate brain measures with behavioural or physiological data that are dynamic in nature and could permit significant progress for bird neurological research. © 1998 Elsevier Science B.V. All rights reserved.     

Initial stages of the high-temperature corrosion of commercial Fe-Cr-Ni alloys in a carburizing atmosphere of low oxygen partial pressure

The early stages of corrosion of AISI 314, HK 40, and Alloy 800H have been studied in a strongly carburizing (a_C=0.8), weakly oxidizing atmosphere at 1098 K. Samples with electropolished and cold-worked surfaces were exposed for up to 400 min. at temperature, in a conventional corrosion rig or in a reaction vessel which was installed within an X-ray photoelectron spectrometer. The latter facility allowed the effects of the specimen heating rate and the rat of gas flow to be investigated. Examination of the corrosion products was accomplished with the aid of XPS, SEM, TEM, and conventional metallography. Initially, surface layers comprised of -Cr₂O₃, (Mn, Cr)₃O₄, and SiO₂ formed, with layer structure, microstructure, and composition being functions of alloy composition and surface condition. Only on the cold-worked surfaces did a well-developed duplex oxide, consisting of an outer, Cr-rich oxide layer and an inner, SiO₂ layer, form. In good agreement with the predicted value of 1.9 wt.%, between 1.4 and 2 wt.% Si in the alloy was required to form a complete SiO₂ layer. After an incubation period, -Cr₂O₃ became unstable and transformed to M₇C₃; the carbides then grew by diffusion of metal from the alloy substrate. The presence of manganese, as (Mn, Cr)₃O₄, in the surface oxide influenced the mode of carbide growth, whereas the rate of carbide growth was severely suppressed by a continuous SiO₂ layer which acted as a diffusion barrier both to metal and to carbon. It is argued that the SiO₂ layer is most effective in reducing carburization when it is free from or contains very few structural defects.     

Calibrated Free-Space Microwave Measurements With an Ultrawideband Reflectometer-Antenna System

We present a 3-12 GHz compact mixer-based reflectometer (CMR) and horn antenna system, and demonstrate its use in detecting backscatter signals with a free space calibration procedure. We evaluate the frequency-domain performance of the CMR-antenna system for measuring the complex reflection coefficient of a dielectric slab and compare it with that of a commercial vector network analyzer (VNA)-antenna setup. Time-domain responses are also investigated, and show the effectiveness of this calibration method. This low-cost, compact system eliminates the need for traditional mechanical standards and a VNA, is effective in reducing reflection artifacts, and allows for flexibility in the placement of reference planes; thus it is well suited for array-based imaging applications