In situ observations on the austenite stability in TRIP‐steel during tensile testing

In‐situ deformation tests have been performed on a steel displaying the transformation‐induced plasticity (TRIP) effect, while monitoring the phase transformation by means of X‐ray diffraction. A tensile stress is applied to 0.4 mm thick samples of this steel with mass contents of 0.26 % Si, 1.5 % Mn, and 1.8 % Al in a transmission geometry for a synchrotron‐radiation beam of 25 μm · 25 μm. On the diffraction patterns every grain appears as a discrete spot. The austenite {200} reflections are analysed during this investigation. The diffraction patterns are treated like a powder pattern for five different η‐angles, with η representing the angle between the tensile direction and the normal direction of the diffracting {200} planes. The results of the analysis show that η = 0° and η = 90° are the preferential orientations for the transformation to martensite. The Ludwigson and Burger model [9] is used to gain more information about the stress dependence of the deformation induced martensite formation. The microdiffraction patterns also reveal the changes in carbon concentration in austenite at each retained austenite fraction.     

Variable Length Optical Packet Synchronizer

Synchronization of asynchronously arriving variable length Internet Protocol packets to a local clock is demonstrated using a fiber-based optical synchronizer. The synchronizer is a four-stage feed-forward design with a resolution of 853 ps and a dynamic tuning range of 12.8 ns. The arrival time of packets is determined on a per packet basis using a payload envelope detection technique. The synchronizer state is dynamically configured on a per packet basis determined from the arrival time. Layer-1 (bit-error-rate) measurements are presented with power penalties 0.5 dB and an input power dynamic range 15 dB. Layer-2 (packet recovery) measurements are presented with power penalties 1.5 dB.     

Building-related symptoms and inflammatory potency of dust from office buildings

The aim was to investigate the association between building-related symptoms (BRS) in office buildings and the inflammatory potency of dust (PD). Furthermore, the association between dust potency and various building characteristics was investigated. Occupants of 22 office buildings received a retrospective questionnaire about BRS (2301 respondents). Dust was collected from groups of offices and building characteristics were recorded. The potency of a dust sample to induce interleukin-8 (IL-8) secretion from the lung epithelial cell line A549 was measured as the slope of the initial linear part of the concentration-response curve. Symptoms of the central nervous system (CNS) were associated with the potency of surface dust (OR = 1.4). This association may be due to an association between an index of CNS symptoms and dust potency in offices of 1-6 occupants (OR = 1.5). No single symptoms correlated with the potency of surface dust. The PD was not related to single building factors. The inflammatory PD may be used as an integrated proxy measure of biologically active compounds in dust, reflecting health relevant properties of the dust. PRACTICAL IMPLICATIONS: The potency of surface dust may be used as a crude measurement of the chemical and biological exposures present in the building, and being associated with the development of central nervous system symptoms. However, additional research is needed to establish the predictive value of the potency of surface dust.     

Critical review of methods for risk ranking of food-related hazards,based on risks for human health

This study aimed to critically review methods for ranking risks related to food safety and dietary hazards on the basis of their anticipated human health impacts. A literature review was performed to identify and characterize methods for risk ranking from the fields of food, environmental science and socio-economic sciences. The review used a predefined search protocol, and covered the bibliographic databases Scopus, CAB Abstracts, Web of Sciences, and PubMed over the period 1993–2013.

All references deemed relevant, on the basis of predefined evaluation criteria, were included in the review, and the risk ranking method characterized. The methods were then clustered—based on their characteristics—into eleven method categories. These categories included: risk assessment, comparative risk assessment, risk ratio method, scoring method, cost of illness, health adjusted life years (HALY), multi-criteria decision analysis, risk matrix, flow charts/decision trees, stated preference techniques and expert synthesis. Method categories were described by their characteristics, weaknesses and strengths, data resources, and fields of applications.

It was concluded there is no single best method for risk ranking. The method to be used should be selected on the basis of risk manager/assessor requirements, data availability, and the characteristics of the method. Recommendations for future use and application are provided.     

Blood pressure changes during short-term fluoxetine treatment

PURPOSE: To evaluate the potential diagnostic role of mediastinal sonography in patients with cystic fibrosis (CF), we screened the mediastinum of adult CF patients with and without signs of infection and healthy controls. METHODS: Fifty-four consecutive adult patients with CF and 53 healthy volunteers underwent high-resolution mediastinal sonography. The paratracheal region and aorticopulmonary window of each subject were examined for lymph nodes. Each patient was screened for clinical signs of infection. RESULTS: Lymph nodes were detectable in the mediastinum of 39 of 50 CF patients (78%); the mean total lymph node volume was 1.5 +/- 1.7 cm3. Lymph nodes were detectable in the mediastinum of 31 of 50 controls (62%); the mean total lymph node volume in this group was 0.3 +/- 0.3 cm3 (p < 0.001). In the 30 CF patients with signs of infection, the mean total lymph node volume was larger (2.0 +/- 1.8 cm3) than in the 20 CF patients without signs of infection (0.7 +/- 0.9 cm3; p = 0.002). CONCLUSIONS: These results indicate that lymph node volume determination by high-resolution mediastinal sonography may help assess inflammatory activity in patients with CF.     

Multifunctional Crosslinkable Iridium Complexes as Hole Transporting/Electron Blocking and Emitting Materials for Solution‐Processed Multilayer Organic Light‐Emitting Diodes

Here, a new series of crosslinkable heteroleptic iridium (III) complexes for use in solution processed phosphorescent organic light emitting diodes (OLEDs) is reported. These iridium compounds have the general formula of (PPZ‐VB)₂Ir(CˆN), where PPZ‐VB is phenylpyrazole (PPZ) vinyl benzyl (VB) ether; and the CˆN ligands represent a family of four different cyclometallating ligands including 1‐phenylpyrazolyl (PPZ) (1), 2‐(4,6‐difluorophenyl)pyridyl (DFPPY) (2), 2‐(p‐tolyl)pyridyl (TPY) (3), and 2‐phenylquinolyl (PQ) (4). With the incorporation of two crosslinkable VB ether groups, these compounds can be fully crosslinked after heating at 180 °C for 30 min. The crosslinked films exhibit excellent solvent resistance and film smoothness which enables fabrication of high‐performance multilayer OLEDs by sequential solution processing of multiple layers. Furthermore, the photophysical properties of these compounds can be easily controlled by simply changing the cyclometallating CˆN ligand in order to tune the triplet energy within the range of 3.0–2.2 eV. This diversity makes these materials not only suitable for use in hole transporting and electron blocking but also as emissive layers of several colors. Therefore, these compounds are applied as effective materials for all‐solution processed OLEDs with (PPZ‐VB)₂IrPPZ (1) acting as hole transporting and electron blocking layer and host material, as well as three other compounds, (PPZ‐VB)₂IrDFPPY ( 2 ), (PPZ‐VB)₂IrTPY(3), and (PPZ‐VB)₂IrPQ( 4 ), used as crosslinkable phosphorescent emitters.     

Simulation of residual stresses at holes in tempered glass: a parametric study

This work presents a full 3D numerical study of the residual stresses in tempered (toughened) glass near holes using Narayanaswamy’s model for the tempering process. It is the objective of the paper to elucidate the influence on the minimal residual compressive stresses at holes from variations in: the far-field stress, plate thickness, hole diameter and the interaction between holes and edges and corners. The work presents novel results for the sensitivity of the residual stresses to geometric features and provides a design tool for estimating residual stresses at holes for different geometries. An example of how to extrapolate the results in terms of far-field stresses is given.