Minimizing entropy generation in internal flows by adjusting the shape of the cross-section

Entropy generation in fully-developed flow through a duct with heat transfer is discussed. Methods are presented to minimize entropy generation by adjusting the shape of the duct’s cross-section. Choosing a different cross-sectional shape allows for control of the competing fluid flow and heat transfer irreversibilities. By controlling the competing irreversibilities, the total entropy generation rate can be minimized. Given the flow rate, heat transfer rate, available cross-sectional area, and the fluid properties, a general design correlation is presented that allows for a determination of the optimal shape of a duct.     

Work stressors, role-based performance, and the moderating influence of organizational support.

As a test of the 2-dimensional model of work stressors, the present study proposed differential relationships between challenge stressors and hindrance stressors and role-based performance, which were expected to be moderated by organizational support. In a sample of 215 employees across 61 offices of a state agency, the authors obtained a positive relationship between challenge stressors and role-based performance and a negative relationship between hindrance stressors and role-based performance. In addition, organizational support moderated the relationship between challenge stressors and role-based performance but did not moderate the relationship between hindrance stressors and role-based performance. This suggests that organizations would benefit from increasing challenges in the workplace as long as they are supportive of employees and removing hindrances. Further implications for organizational theory and practice are discussed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

High resolution optical microprobe investigation of surface grinding stresses in Al2O3 and Al2O3/SiC nanocomposites

It has previously been suggested that Al₂O₃/SiC nanocomposites develop higher surface residual stresses than Al₂O₃ on grinding and polishing. In this work, high spatial resolution measurements of residual stresses in ground surfaces of alumina and nanocomposites were made by Cr³⁺ fluorescence microspectroscopy. The residual stresses from grinding were highly inhomogeneous in alumina and 2 vol.% SiC nanocomposites, with stresses ranging from ～ ?2 GPa within the plastically deformed surface layers to ～ +0.8 GPa in the material beneath them. Out of plane tensile stresses were also present. The stresses were much more uniform in 5 and 10 vol% SiC nanocomposites; no significant tensile stresses were present and the compressive stresses in the surface were ～ ?2.7 GPa. The depth and extent of plastic deformation were similar in all the materials (depth ～ 0.7–0.85 μm); the greater uniformity and compressive stress in the nanocomposites with 5 and 10 vol% SiC was primarily a consequence of the lack of surface fracture and pullout during grinding. The results help to explain the improved strength and resistance to severe wear of the nanocomposites.     

Risk based management of contaminated sediments: consideration of spatial and temporal patterns in exposure modeling

This paper addresses interactions among foraging behavior, habitat preferences, site characteristics, and spatial distribution of contaminants in developing PCB exposure estimates for winter flounder at a hypothetical open water dredged material disposal site in the coastal waters of New York and New Jersey (NY-NJ). The implications of these interactions for human health risk estimates for local recreational anglers who fish for and eat flounder are described. The models implemented in this study include a spatial submodel to account for spatial and temporal characteristics of fish exposures and a probabilistic adaptation of the Gobas bioaccumulation model that accounts for temporal variation in concentrations of hydrophobic contaminants in sediment and water. We estimated the geographic distribution of a winter flounder subpopulation offshore of NY-NJ based on species biology and its vulnerability to local recreational fishing, the foraging area of individual fish, and their migration patterns. We incorporated these parameters and an estimate of differential attraction to a management site into a spatially explicit model to assess the range of exposures within the population. The output of this modeling effort, flounder PCB tissue concentrations, provided exposure point concentrations for an estimate of human health risk through ingestion of locally caught flounder. The risks obtained for the spatially nonexplicit case are as much as 1 order of magnitude higher than those obtained with explicit consideration of spatial and temporal characteristics of winter flounder foraging and seasonal migration. This practice of "defaulting" to extremely conservative estimates for exposure parameters in the face of uncertainty ill serves the decision-making process for management of contaminated sediments in general and specifically for disposal of dredged materials. Consideration of realistic spatial and temporal scales in food chain models can help support sediment management decisions by providing a quantitative expression of the confidence in risk estimates.     

The effect of prepartum injection of vitamin E on health in transition dairy cows

The objective of this study was to investigate parenteral vitamin E for the prevention of peripartum disease in dairy cows. A randomized clinical trial was conducted in 21 commercial dairy herds. Cows (n = 1142) were randomly assigned to receive either a single subcutaneous injection of 3000 IU of vitamin E, or placebo, 1 wk before expected calving. Serum alpha-tocopherol was significantly increased in treated cows at 7 and 14 d, but not at 21 d after injection. Overall, there were no significant differences between treatment groups in the incidence of retained placenta, clinical mastitis, metritis, endometritis, ketosis, displaced abomasum, or lameness. However, there was a conditional benefit of treatment for reduction of the incidence of retained placenta. Cows with marginal pretreatment vitamin E status (serum alpha-tocopherol to cholesterol mass ratio < 2.5 x 10(-3)) that received an injection of vitamin E tended to have reduced risk of retained placenta. However, in cows with adequate serum vitamin E, there was no reduction in the incidence of any disease. For clinical application, primiparous animals were most likely to benefit from prepartum injection of vitamin E.     

A multiple-layer finite-element model of the surface EMG signal

The effect of skin, muscle, fat, and bone tissue on simulated surface electromyographic (EMG) signals was examined using a finite-element model. The amplitude and frequency content of the surface potential were observed to increase when the outer layer of a homogeneous muscle model was replaced with highly resistive skin or fat tissue. The rate at which the surface potential decreased as the fiber was moved deeper within the muscle also increased. Similarly, the rate at which the surface potential decayed around the surface of the model, for a constant fiber depth, increased. When layers of subcutaneous fat of increasing thickness were then added to the model, EMG amplitude, frequency content, and the rate of decay of the surface EMG signal around the limb decreased, due to the increased distance between the electrodes and the active fiber. The influence of bone on the surface potential was observed to vary considerably, depending on its location. When located close to the surface of the volume conductor, the surface EMG signal between the bone and the source and directly over the bone increased, accompanied by a slight decrease on the side of the bone distal to the active fiber. The results emphasize the importance of distinguishing between the effects of material properties and the distance between source and electrode when considering the influence of subcutaneous tissue, and suggest possible distortions in the surface EMG signal in regions where a bone is located close to the skin surface.     

Adaptation of spatiotemporal mechanisms by increment and decrement stimuli

Sawtooth modulation has been used in the past to examine visual sensitivity to luminance increments and decrements. The threshold elevation caused by adaptation depends on the spatial profile of the stimulus field and the polarities of the adaptation and test stimuli. We hypothesized that the adaptation effects reflect a change in the sensitivity of the spatiotemporal channels that detect the stimuli. We used a 2-deg disk centered in a larger surround field. Five levels of contrast between the test field and surround were investigated: equiluminant, three intermediate levels, and dark. At each contrast, observers adapted for 5 s to 2-Hz sawtooth modulation (rapid-on or rapid-off). Immediately after adaptation, thresholds were measured for detection of a single cycle of either a rapid-on or a rapid-off waveform. Varying the contrast of the surround affected observers' sensitivity to the polarity of the sawtooth stimulus to the extent that the pattern of sensitivity with the equiluminant surround was the opposite of that with the dark surround. To examine temporal factors, we measured thresholds for slow (500-ms ramps) and fast (8.3-ms pulses) test stimuli. The adaptation effect was preserved with the ramp stimuli but not with the pulse stimuli. Blurring the edge between the test and surround fields in the equiluminant surround condition raised thresholds for all sawtooth test stimuli, suggesting that spatiotemporal channels sensitive to high spatial frequencies and low temporal frequencies facilitate detection in that condition. These findings suggest that adaptation to sawtooth modulation can differentially effect the sensitivity of ON and OFF pathways, but the relative desensitization of each pathway depends on an interaction with the adaptation state of spatiotemporal channels that are involved in detection.