Reactive brazing of ceria to an ODS ferritic stainless steel

This research study shows that a ceria ceramic can be bonded to an ODS ferritic stainless steel (MA956) by reactive brazing using a Ag₆₈-Cu_27.5-Ti_4.5 interlayer. The ability to join these materials provides an alternative to the current ceramic interconnects used in the development of solid oxide fuel cells. Initial results show that the ceramic-metal bonds survived the bonding process irrespective of the degree of porosity within the ceria ceramic. Metallographic analyses indicate that a reaction zone formed along the ceria/braze interface, which was not only titanium rich, but also consisted of a mixture of copper oxides. When the ceramic-metal bonds were exposed to high bonding temperatures or when subjected to thermal cycling at 700°C, this reaction layer increased in thickness and had a detrimental affect on the mechanical strength of the final joints.     

Enhancement of computed tomography liver contrast using iomeprol-containing liposomes and detection of small liver tumors in rats

RATIONALE AND OBJECTIVES: We evaluated iomeprol-containing liposomes (Lipiom), a new contrast medium for computed tomography (CT) liver scanning, in an animal model of chemically induced hepatocellular carcinomas and other liver tumors in rats. METHODS: Liver tumors were induced by administration of carcinogens to rats, either 0.55% (w/w) 1'-hydroxysafrole in the diet or induction by 3'-methyl-4-diethylaminoazobenzene followed by promotion with carbon tetrachloride. CT scanning was performed 1-3 hr after intravenous injection of iomeprol-containing liposomes. RESULTS: After injection of iomeprol-containing liposomes at a dose of 70 mg of liposome-entrapped iodine per kilogram of body weight, the normal liver parenchyma showed a contrast enhancement, in Hounsfield units, of more than 60% over the control value before bolus. Liver tumors with no or few Kupffer cells were not enhanced and appeared as dark areas within the normal parenchyma. Tumors and pretumoral lesions devoid of Kupffer cells, as small as 3 mm in diameter, could be distinguished using this non-invasive method. CONCLUSION: CT liver scanning after injection of iomeprol-containing liposomes appears to be promising method for detecting liver tumors and focal liver lesions.     

Rheology of concentrated solutions of hyperbranched polyesters

The solution rheology of different generations of hyperbranched polyesters in N‐methyl‐2‐pyrrolidinone (NMP) solvent was examined in this study. The solutions exhibited Newtonian behavior over a wide range of polyester concentrations. Also, the relative viscosities of poly(amidoamine) (PAMAM) dendrimers in ethylenediamine were compared with those of the hyperbranched polyesters in NMP. Both types of dendritic polymers have relative viscosities that are exponential functions of their molar fraction in solution. The slopes of these relative viscosity curves show a linear relationship with respect to the generation number. PAMAM dendrimers have the greater slopes for each generation, reflecting their relatively larger intrinsic viscosity values.     

Validation of a Three-Dimensional Computational Fluid Dynamics Model of a Contact Tank

A three-dimensional (3D) computational fluid dynamics (CFD) model of a contact tank is presented in this paper. The model results are compared against 3D velocities and flow through curve (FTC) data, representing a tracer concentration profile, from a 1:8 scale physical model. The objective is to demonstrate that CFD models can simulate both the FTC and the 3D velocity field quite well. Simultaneous validation of velocities and FTC is important in ascertaining the predictive capabilities of CFD models, as physical model studies indicate that different baffle arrangements can lead to similar FTCs. Therefore, a good prediction of only FTC, as presented in previous 3D CFD model studies, does not necessarily imply a correct simulation of the flow field.     

A study of neutron and gamma radiation effects on transmission of various types of glasses, optical coatings, cemented optics and fiber

A study of radiation effects on various types of glasses, dielectric optical coatings, cemented optics and fiber was undertaken with a view to select them for extreme radiation environments. Samples were exposed to different radiation doses in the Pakistan Research Reactor-I (PARR-I) for neutron and Cobalt 60 source for gamma irradiation. Transmissions were measured before and after irradiation. The dielectric coatings were subjected to additional tests (adhesion, abrasion and humidity, etc.) as per MIL-M-13508C and MIL-C-675C. All 15 glasses studied showed varying amounts of transmission loss as expected, with negligible degradation for three types. Recovery of transmissions with time/ageing was also studied, with more or less complete recovery with temperature annealing. A faster bleaching of darkened/brown glasses was achieved by using UV lamps or UV laser. The dielectric coatings (HR, AR) and one of the two commercial optical cements showed excellent resistance to neutrons and gamma radiations, and could be good candidates for the fabrication and utilization of optical components in extreme radiation environments. The data allowed several Chinese glasses to be studied for the first time.     

Energy management for battery-powered reconfigurable computing platforms

We define portable reconfigurable computing platforms as those which have some form of configurable logic coupled with other on-chip or off-chip processing units such as soft processors, embedded processors, and voltage-scalable processors. In the first part of this paper, we present and test a unique methodology where we dynamically change the active area of a field programmable gate array (FPGA) to vary the battery usage and lifetime of the system, by running it on several different taskgraph structures and report an average of 14% and as high as 21%, less battery capacity used, as compared to nonoptimal execution. In the second part of this paper, we integrate the above methodology with more traditional voltage and frequency scaling techniques for portable systems and present a heuristic iterative algorithm for single and multiple processing units. The iterative heuristic algorithm finds a sequence of tasks along with an appropriate design point (implementation option) for each task, such that a deadline is met and the amount of battery energy used is as small as possible. We have used several real-world benchmarks to test the effectiveness of this methodology and we will present the results.     

Social deprivation of neonatal, adolescent, and adult rats has distinct neurochemical and behavioral consequences

This review examines the consequences of social deprivation on brain chemistry and behavior on rats. Although social deprivation produces wide-ranging behavioral and neurochemical effects, it appears that these effects are determined by a number of factors, the most critical factor being the age or developmental stage during the period of deprivation. Roughly, the effects examined in this review may be separated into three major developmental stages and each is related to deprivation of specific types of social interaction: preweaning/neonatal, postweaning/adolescent, and adult. The effects of social deprivation during each of these stages appears to be neurochemically and behaviorally specific. However, much of the research to date has failed to examine deprivation during specific stages, often combining deprivation of different types. Nonetheless, these modifications of experience produce animals of differing phenotypes, which could be characterized as pathological in nature in many instances, and may model particular aspects of human psychopathologies or perhaps the propensity to develop those phenotypic features.     

Capacitor coupled converter (C3) for high power DCconversion

The bang-bang controlled capacitor coupled converter (C³) is described in this paper. Due to the converter's inherent commutating property, the C³ can accommodate thyristors as well as high-power gate turn-off switches, due to zero-current switching transitions. The zero-current switching is achieved at no current stress increase, therefore, the topology is considered appropriate for high-power processing. DC and small signal AC models are derived for the bang-bang controlled C³, a design procedure is proposed, and simulation results are discussed. Finally, oscillograms from a proof of principle prototype circuit are presented