Modeling of microstrip antennas using neural networks techniques: A review

Artificial neural networks modeling have recently acquired enormous importance in microwave community especially in analyzing and synthesizing of microstrip antennas (MSAs) due to their generalization and adaptability features. A trained neural model estimates response very fast, which is nearly equal to its measured and/or simulated counterpart. Thus, it completely bypasses the repetitive use of conventional models as these models need rediscretization for every minor changes in the geometry, which itself is a time‐consuming exercise. The purpose of this article is to review this emerging area comprehensively for both analyzing and synthesizing of the MSAs. During reviewing process, some untouched cases are also observed, which are essentially required to be resolved for antenna designers. Unique and efficient neural networks‐based solutions are suggested for these cases. The proposed neural approaches are validated by fabricating and characterizing of the prototypes too. © 2015 Wiley Periodicals, Inc. Int J RF and Microwave CAE 25:747–757, 2015.     

Wavelet based sub-band parameters for classification of unaspirated Hindi stop consonants in initial position of CV syllables

This paper proposes a new feature extraction technique using wavelet based sub-band parameters (WBSP) for classification of unaspirated Hindi stop consonants. The extracted acoustic parameters show marked deviation from the values reported for English and other languages, Hindi having distinguishing manner based features. Since acoustic parameters are difficult to be extracted automatically for speech recognition. Mel Frequency Cepstral Coefficient (MFCC) based features are usually used. MFCC are based on short time Fourier transform (STFT) which assumes the speech signal to be stationary over a short period. This assumption is specifically violated in case of stop consonants. In WBSP, from acoustic study, the features derived from CV syllables have different weighting factors with the middle segment having the maximum. The wavelet transform has been applied to splitting of signal into 8 sub-bands of different bandwidths and the variation of energy in different sub-bands is also taken into account. WBSP gives improved classification scores. The number of filters used (8) for feature extraction in WBSP is less compared to the number (24) used for MFCC. Its classification performance has been compared with four other techniques using linear classifier. Further, Principal components analysis (PCA) has also been applied to reduce dimensionality.     

Your comments matter: incorporating viewers’ comments for ranking online video content using bibliometrics

ABSTRACT

The quality of user-generated content over World Wide Web media is a matter of serious concern for both creators and users. To measure the quality of content, webometric techniques are commonly used. In recent times, bibliometric techniques have been introduced to good effect for evaluation of the quality of user-generated content, which were originally used for scholarly data. However, the application of bibliometric techniques to evaluate the quality of YouTube content is limited to h-index and g-index considering only views. This paper advocates for and demonstrates the adaptation of existing Bibliometric indices including h-index, g-index and M-index exploiting both views and comments and proposes three indices h_vc, g_vc and m_vc for YouTube video channel ranking. The empirical results prove that the proposed indices using views along with the comments outperform the existing approaches on a real-world dataset of YouTube.     

A supply network-modelling system for a small- to medium-sized manufacturing company

During the late 1990s and early 2000s, the profile of global manufacturing has experienced many changes. There is anecdotal evidence that many western manufacturing companies have chosen to expand their manufacturing base across geographical boundaries. The common reasons sited for these ventures are to exploit less expensive labour markets, to establish a presence in expanding markets and in response to the threat of new competition. Whilst a global manufacturing base can prove to have many cost and sales benefits, there are also many disadvantages. Logistics operations can often increase in complexity leading to higher reliance on planning and effective interpretation of demand data. In response, systems modelling has remerged as a fertile research area after many years. Many modelling and simulation techniques have been developed, but these have had very limited practical success. The authors have identified that majority of these simulation techniques rely upon a detailed market structure being known, when this is rarely the case. This paper describes the outcome of a research project to develop of a pragmatic set of tools to gather, assess and verify supply chain structure data. A hybrid collection of technologies are utilised to assist these operations and to build a dynamic supply network model.     

Modelling of the filling of micro-cavities of finite geometry by amorphous polymers using hot-embossing

The possibility to fill cavities of finite geometry could be described using an analytical model of the hot-embossing process of viscoelastic polymers. This model is based on the volume conservation during the forming process which allows to predict data concerning the geometrical evolution of the material on one hand, and on the other hand the filling time of cavities in the mould. A particular attention was drawn on the necessary time to fill the cavities depending on their shape or a scale factor for a given cavity shape.     

A Cooperative Game Theoretical Technique for Joint Optimization of Energy Consumption and Response Time in Computational Grids

With the explosive growth in computers and the growing scarcity in electric supply, reduction of energy consumption in large-scale computing systems has become a research issue of paramount importance. In this paper, we study the problem of allocation of tasks onto a computational grid, with the aim to simultaneously minimize the energy consumption and the makespan subject to the constraints of deadlines and tasks' architectural requirements. We propose a solution from cooperative game theory based on the concept of Nash Bargaining Solution. In this cooperative game, machines collectively arrive at a decision that describes the task allocation that is collectively best for the system, ensuring that the allocations are both energy and makespan optimized. Through rigorous mathematical proofs we show that the proposed cooperative game in mere O(n mlog(m)) time (where n is the number of tasks and m is the number of machines in the system) produces a Nash Bargaining Solution that guarantees Pareto-optimally. The simulation results show that the proposed technique achieves superior performance compared to the Greedy and Linear Relaxation (LR) heuristics, and with competitive performance relative to the optimal solution implemented in LINDO for small-scale problems.     

Earthquake onset detection using spectro-ratio on multi-threshold time–frequency sub-band

Automatic onset detection and picking algorithm has been proposed by applying the spectro-ratio on time–frequency sub-band. The proposed algorithm does not need any parameter settings as it will work on data generated by either short or very broad band seismometers. Our algorithm is applied on local events from Cairo region recorded by three stations of the Egyptian National Seismic Network (ENSN). Maximum standard deviation is observed to be 0.113 s of the corresponding manual picks made by analysts.     

Extended Kalman filter based speeds estimation of series-connected five-phase two-motor drive system

The multi-phase machines enables independent control of a few number of machines that are connected in series in a particular manner, and the supply is fed from a single voltage source inverter (VSI). The idea was first implemented for a five-phase series-connected two-motor drive system, but is now applicable to any number of phases. The number of series-connected machines is a function of the phase number of VSI. Variable speed induction motor drives without mechanical speed sensors at the motor shaft have the attractions of low cost and high reliability. To replace the sensor, information of the rotor speed is extracted from measured stator currents and voltages at motor terminals. Open-loop estimators or closed-loop observers are used for this purpose. They differ with respect to accuracy, robustness, and sensitivity against model parameter variations. This paper analyses operation of an EKF-based sensorless control of vector controlled series-connected two-motor five-phase drive system with current control in the stationary reference frame. Results, obtained with fixed voltage and fixed frequency supply fed and hysteresis current control, is presented for various operating conditions on the basis of simulation. The purpose of this paper is to report first time, the simulation results on a sensorless control of a five-phase two-motor series-connected drive system using EKF estimator.     

Design and characterization of coherent integrated fiber-optic imaging probes

An integrated fiber-optic probe comprising a short length of multimode fiber that is fusion spliced to a monomode optical fiber has been fabricated for imaging and nonimaging applications. The fiber probe, typically 250 μm in diameter, can deliver a focused Gaussian spot approximately 25 μm in diameter at a distance of approximately 500 μm from the tip. Two off-the-shelf graded-index multimode fibers have been used in the fabrication of imaging and nonimaging probes. These integrated probes have considerably improved the spatial resolution of backscatter lensless fiber probes being utilized in the dynamic light-scattering characterization of colloidal suspension.