Synthesis of layered MCM-22(P) in the presence of hexamethonium cations and its transformation into EUO- and MWW-type zeolites

Layered MCM-22(P) was synthesized in the presence of hexamethonium (HM) cations. Compared to zeolite EU-1 (EUO-type structure), which crystallizes in similar conditions, its formation is favored at high HM concentrations (HM/SiO₂ ≥ 0.3) and in the absence of Na₂O. HM-containing MCM-22(P) was used as starting material for zeolite formation. Upon hydrothermal treatment, HM-MCM-22(P) transforms into zeolite EU-1 and upon calcination into a MWW-type zeolite. Transformation mechanisms were studied by standard characterization techniques such as XRD, SEM and TEM. Catalytic properties of the MWW-type zeolite obtained from this precursor were evaluated in a m-xylene isomerization reaction. Compared to zeolite MCM-22 prepared with hexamethyleneimine, a higher catalytic activity and an increased isomerization selectivity were observed and discussed.     

Host Sex Discrimination by an Egg Parasitoid on Brassica Leaves

Egg parasitoids are able to find their hosts by exploiting their chemical footprints as host location cues. In nature, the apolar epicuticular wax layer of plants that consists of several classes of hydrocarbons serves as the substrate that retains these contact kairomones. However, experiments on chemical footprints generally have used filter paper as substrate to study insect behavior. Here, we explored the ability of Trissolcus basalis (Scelionidae) females to discriminate between footprint cues left by male and female Nezara viridula (Pentatomidae) on leaves of their host plant Brassica oleracea (broccoli). Furthermore, we analyzed the chemical composition of the outermost wax layer of broccoli leaves to evaluate the degree of overlap in insect and plant cuticular hydrocarbons that could lead to masking effects in the detection of footprint cues. Our results showed that B. oleracea epicuticular wax retains the chemical footprints of adult bugs and allows T. basalis females to differentiate hosts of different sex. Traces of female bugs elicited more extensive searching behavior in egg parasitoids than traces of males. The application of n-nonadecane, a compound specific to male N. viridula, on the tarsi of female bugs prevented parasitoid females from distinguishing between host male and host female footprints. Analyses of B. oleracea leaves revealed that epicuticular waxes were mainly composed of linear alkanes, ketones, and secondary alcohols. Alkanes were dominated by n-nonacosane (nC29) and n-hentriacontane (nC31), while male-specific n-nonadecane (nC19) was absent. The ecological significance of these results for parasitoid host location behavior is discussed.     

Low-Temperature Sintering and Microwave Dielectric Properties of Anorthite-Based Glass-Ceramics

TiO₂ nucleated anorthite-based glass-ceramics were fabricated from glass powders. After sintering and crystallization heat treatment, various physical properties, including apparent bulk density and water absorption, were examined to evaluate the sintering behavior of anorthite-based glass-ceramic. Results showed that the complete-densification temperature for specimens was as low as 900°C. Sufficient crystallization was achieved by subsequently raising the firing temperature to 950°C, and the dielectric quality factor was promoted to the maximum value. Contents of nucleating agent (TiO₂) played an important role in the dielectric constants. The crystallinity was controlled by raising the firing temperature at a constant heating rate. The degree of crystallization affected the dielectric properties of sintered glass-ceramics. At the resonant frequency of 10 GHz, anorthite glass-ceramics with 5 wt% TiO₂ possessed the lowest permittivity of 8 and exhibited appropriate dielectric properties as compared with those with B₂O₃ and 10 wt% TiO₂.     

The Role of Cell Cycle Regulators in Cell Survival—Dual Functions of Cyclin-Dependent Kinase 20 and p21Cip1/Waf1

The mammalian cell cycle is important in controlling normal cell proliferation and the development of various diseases. Cell cycle checkpoints are well regulated by both activators and inhibitors to avoid cell growth disorder and cancerogenesis. Cyclin dependent kinase 20 (CDK20) and p21^Cip1/Waf1 are widely recognized as key regulators of cell cycle checkpoints controlling cell proliferation/growth and involving in developing multiple cancers. Emerging evidence demonstrates that these two cell cycle regulators also play an essential role in promoting cell survival independent of the cell cycle, particularly in those cells with a limited capability of proliferation, such as cardiomyocytes. These findings bring new insights into understanding cytoprotection in these tissues. Here, we summarize the new progress of the studies on these two molecules in regulating cell cycle/growth, and their new roles in cell survival by inhibiting various cell death mechanisms. We also outline their potential implications in cancerogenesis and protection in heart diseases. This information renews the knowledge in molecular natures and cellular functions of these regulators, leading to a better understanding of the pathogenesis of the associated diseases and the discovery of new therapeutic strategies.     

Screening of lactic acid bacteria for fermentation of minced wastes of Argentinean hake (Merluccius hubbsi)

Sixteen strains of lactic acid bacteria were evaluated for their capacity of acidification of Merluccius hubbsi fish wastes obtained from a processing factory. Only three lactobacilli (Lactobacillus buchneri B-1837, Lactobacillus arizonensis B-14768 and Lactobacillus plantarum B-4496) were able to reduce the pH value to 4.0 or below when using glucose or sucrose as carbon source. Either with only 25 g l^?1 of glucose or sucrose, L. arizonensis B-14768 reduced the pH to 3.8 ± 0.2 within 24 h of fermentation. The acid tolerance test (pH 3.0 at 37 °C) for the strains presented D_pH3-values of 192, 383 and 767 min for L. buchneri, L. plantarum and L. arizonensis, respectively. However, at a lower pH value (pH 2.0) only L. arizonensis was significantly recovered after 45 min of exposure (D_pH2 68 min). Considering together the acidification capacity, the tolerance to other stresses (heat and bile salts) and the lower optimum temperature for the process, L. arizonensis is described as a suitable strain for M. hubbsi silage; constituting a promissory alternative for fish fermentation at location with temperate or cold climes.     

Solid‐phase extraction of phenolic compounds with poly[metalloprotoporphyrin IX]

A highly insoluble metalloporphyrin polymeric material was used as sorbent for the solid‐phase extraction of phenolic compounds. Substantial quantities of phenols (40 to 60 mg/g polymer) were absorbed from aqueous solution comparing satisfactorily with other extraction methods. The polymeric phase presented similar K_SPE values for the hydrophobic compounds tested such as p‐chlorophenol, BPA, p‐nitrophenol, and a significant lower value for the more hydrophilic p‐aminophenol and cresol. Several metallic complexes of protoporphyrin IX (Co²⁺, Cu²⁺, Ni²⁺, Zn²⁺, and Fe³⁺) have been tested. The analytes were extracted with high recoveries at acid and neutral pH values, whereas at pH 10 low recoveries were obtained. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 3038–3043, 2001     

New alginate foams: Box‐Behnken design of their manufacturing; fire retardant and thermal insulating properties

A new method for preparing alginate foams with progressive release of copper in the presence of sodium lauryl sulfate (SLS, foaming agent) has been designed. Copper acts as the ionotropic gelling agent through the reaction of copper carbonate with gluconolactone. The process does not require freeze‐drying contrarily to the conventional method used for preparing macroporous alginate foams. The new materials investigated in this study have remarkable thermal properties, including thermal conductivity lower than 0.041 W m^?1 K^?1 and low heat release (below 2 kJ g^?1), which allows labeling these foams self‐extinguishing materials. An experimental design methodology, based on a Box‐Behnken plan with three parameters and three levels, is successfully used for evaluating the impact of the amounts of alginate, SLS, and copper carbonate on the productivity, apparent density, and shrinking at air‐drying. It yielded an optimization of the process for the manufacturing of light, and stable/rigid insulating and thermally stable materials. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45868.     

Synthesis and Biological Evaluation of CTP Synthetase Inhibitors as Potential Agents for the Treatment of African Trypanosomiasis

Acivicin analogues with an increased affinity for CTP synthetase (CTPS) were designed as potential new trypanocidal agents. The inhibitory activity against CTPS can be improved by increasing molecular complexity, by inserting groups able to establish additional interactions with the binding pocket of the enzyme. This strategy has been pursued with the synthesis of α‐amino‐substituted analogues of Acivicin and N1‐substituted pyrazoline derivatives. In general, there is direct correlation between the enzymatic activity and the in vitro anti‐trypanosomal efficacy of the derivatives studied here. However, this cannot be taken as a general rule, as other important factors may play a role, notably the ability of uptake/diffusion of the molecules into the trypanosomes.     

Microstructure and tensile properties of squeeze cast magnesium alloy AM50

High-pressure die cast magnesium alloy AM50 is currently used extensively in large and complex shaped thin-wall automotive components. For further expansion of the alloy usage in automobiles, novelmanufacturing processes need to be developed. In this study, squeeze casting of AM50 alloy with a relatively thick cross section was carried out using a hydraulic press with an applied pressure of 70 MPa. Microstructure and mechanical properties of the squeeze cast AM50 with a cross-section thickness of 10 mm were characterized in comparison with the die cast counterpart. The squeeze cast AM50 alloy exhibits virtually no porosity in the microstructure as evaluated by both optical microscopy and the density measurement technique. The results of tensile testing indicate the improved tensile properties, specifically ultimate tensile strength and elongation, for the squeeze cast samples over the conventional high-pressure die cast parts. The analysis of tensile behavior show that the strain-hardening rate during the plastic deformation of the squeeze cast specimens is constantly higher than that of the die cast specimens. The scanning electron microscopy fractography evidently reveals the ductile fracture features of the squeeze cast alloy AM50.     

Corrosion resistance of duplex stainless steel subjected to long-term annealing in the spinodal decomposition temperature range

The effect of thermal annealing up to 15,000 h between 300 °C and 500 °C on the corrosion resistance of the duplex stainless steel (DSS) 7MoPLUS has been investigated by using the DLEPR test. Spinodal decomposition in 7MoPLUS is unabated even after annealing for 15,000 h and no healing has been observed. The possible healing mechanisms in this temperature range (back diffusion of Cr atoms from the Cr-rich ferrite (α_Cr) and diffusion of Cr atoms from the austenite) and its absence in the present steel have been discussed.