The effect of composition on the properties of nylon 612 copolymers

The series of nylon 612 copolymers was synthesized from caprolactam (C) and laurolactam (L) at 145°C. The 50/50 C/L molar ratio copolymer was found to have the minimum melting temperature (T_m ) for the series. The glass transition temperatures (T_g 's) of the copolymers were affected by the crystallinity of the copolymers. The T_g was at a minimum for the 50/50 copolymer for crystalline samples. However, for amorphous samples there was a decrease in T_g with increasing L content. Percent crystallinity was determined by differential scanning calorimetry and X-ray techniques. It was found that the degree of crystallinity was at a minimum for copolymers of 70/30 to 40/60 C/L ratios. Coefficients of linear thermal expansion (CLTE) were obtained for the copolymers at 10°C intervals from 20 to 70°C for dry and from 20 to 50°C for samples conditioned at 50% relative humidity and 50°C. The dry samples gave lower initial values, but had a greater temperature dependence than the conditioned samples. As expected, the CLTE was found to be lowest for samples exhibiting the highest crystallinity. The tensile strengths and moduli decreased rapidly with increasing L up to the 70/30 C/L ratio after which they remained relatively constant. Elongations reached maximums between 70/30 and 40/60 C/L ratios. An inverse relationship was found between crystallinity and impact strength.     

High resolution ultrastructural mapping of total calcium: electron spectroscopic imaging/electron energy loss spectroscopy analysis of a physically/chemically processed nerve-muscle preparation

We report on a procedure for tissue preparation that combines thoroughly controlled physical and chemical treatments: quick-freezing and freeze-drying followed by fixation with OsO4 vapors and embedding by direct resin infiltration. Specimens of frog cutaneous pectoris muscle thus prepared were analyzed for total calcium using electron spectroscopic imaging/electron energy loss spectroscopy (ESI/EELS) approach. The preservation of the ultrastructure was excellent, with positive K/Na ratios revealed in the fibers by x-ray microanalysis. Clear, high-resolution EELS/ESI calcium signals were recorded from the lumen of terminal cisternae of the sarcoplasmic reticulum but not from longitudinal cisternae, as expected from previous studies carried out with different techniques. In many mitochondria, calcium was below detection whereas in others it was appreciable although at variable level. Within the motor nerve terminals, synaptic vesicles as well as some cisternae of the smooth endoplasmic reticulum yielded positive signals at variance with mitochondria, that were most often below detection. Taken as a whole, the present study reveals the potential of our experimental approach to map with high spatial resolution the total calcium within individual intracellular organelles identified by their established ultrastructure, but only where the element is present at high levels.     

Learning from designing the RoboFesta—Blue Peter robots

Can children and adults learn anything from building robots? In 2001 we ran a robot design competition with the BBC TelevisionBlue Peter, program. Some 32 000 children, aged between 5 and 16 years, submitted paper designs. We built prototypes of the four winners' robots for a Robot Design MasterClass at the London Science Museum. It is widely believed that across the curriculum, robotics is a powerful force in motivating education. We ask what the children learned from the robot design process. Our answer is that they learned many things, both inside and outside the science and technology curriculum.     

Swelling and microstructure of austenitic stainless steel ChS-68 CW after high dose neutron irradiation

Austenitic stainless steel ChS-68 serving as fuel pin cladding was irradiated in the 20% cold-worked condition in the BN-600 fast reactor in the range 56-84 dpa. This steel was developed to replace EI-847 which was limited by its insufficient resistance to void swelling. Comparison of swelling between EI-847 and ChS-68 under similar irradiation conditions showed improvement of the latter steel by an extended transient regime of an additional ∼10 dpa. Concurrent with swelling was the development of a variety of phases. In the temperature range 430-460 °С where the temperature peak of swelling was located, the principal type of phase generated during irradiation was G-phase, with volume fraction increasing linearly with dose to ∼0.5% at 84 dpa. While the onset of swelling is concurrent with formation of G-phase, the action of G-phase cannot be confidently ascribed to significant removal from solution of swelling-suppressive elements such as silicon. A plausible mechanism for the higher resistance to void swelling of ChS-68 as compared with EI-847 may be related to an observed higher stability of faulted dislocation loops in ChS-68 that impedes the formation of a glissile dislocation network. The higher level of boron in ChS-68 is thought to be one contributor that might play this role.     

Three-dimensional integrated optics using polymers

Some of the key components are demonstrated to make three-dimensional (3-D) optical integrated circuits possible using polymers. Fabrication techniques of shadow reactive ion etching, shadow photolithography, and gray-level photolithography to produce complex 3-D integrated optic structures are demonstrated. Vertical waveguide bends exhibit excess losses of <0.3 dB, and vertical power splitters possess predictable output splitting ratios between multiple core levels with excess losses of <0.5 dB. Vertical polarization splitters exhibit power extinction ratios of 15 dB between the output core layers. A 1×4 vertical-horizontal power splitter is also demonstrated. Additionally, these techniques are used to integrate different polymer materials into the same optical circuit while easily solving the mode mismatch problem. To show the technique, a polymer electrooptic modulator is vertically integrated with a low-loss waveguide     

An eigenvector method for estimating item parameters of the dichotomous and polytomous Rasch models

The purpose of this paper is to describe a technique for obtaining item parameters of the Rasch model, a technique in which the item parameters are extracted from the eigenvector of a matrix derived from comparisons between pairs of items. The technique can be applied to both dichotomous and polytomous data. In application to a previously published data set, it is shown that the technique provides item parameter estimates comparable to those produced by joint maximum likelihood estimation, and for the most difficult items, the technique appears to produce superior estimates. This method has several advantages. It easily accommodates missing data, and makes transparent the basis for item parameter estimation in the presence of missing data. Furthermore, the method provides a link to other methods in the social sciences and, in particular, provides the framework for application of graph theory to the analysis of assessment networks. Finally, it exploits several characteristics that are unique to the Rasch model.     

Fabrication and characterization of high-speedpolyurethane-disperse red 19 integrated electrooptic modulators foranalog system applications

The fabrication and characterization of polymeric electrooptic modulators, made of a thermally crosslinkable polyurethane with Disperse Red 19 side chains, are summarized in this paper. Straight channel and Mach-Zehnder modulators have been fabricated, packaged and tested for the fiber-optic analog transmission system applications. Device performances including halfwave voltage, insertion loss, on-off ratio, and modulation frequency responses were measured. Long-term halfwave voltage stability, dc-bias voltage stability, and optical power handling capability at 1.3-μm wavelength were investigated. A carrier-to-noise ratio of 53 dB and 80-channel television transmission have been demonstrated using the packaged polymer modulators