Analysis of Causes of Falsework Failures in Concrete Structures

A study of 85 major falsework collapses of bridges and buildings in the past 23 yrs has documented the types of collapsed falseworks and failed permanent structures, the construction stages at the time of collapse, and the causes of failures. Three causes of failure were identified: triggering; enabling; and procedural causes. Most failures occurred because of the interaction of the triggering and enabling events that were, in many cases, produced by inadequacies in the procedural methods. Impact forces resulting from concreting operations have repeatedly triggered falsework failures that were enabled by deficiencies in the falsework bracings, components, connections, foundations, and design. Inadequate review of falsework design and monitoring procedures were frequent problems that facilitated the occurrernce of these events. The findings emphasize the importance of proper delineation of responsibility of each party in the building process in order to reduce falsework failures in the future.     

Surface chemistry of phosphorus-containing carbons of lignocellulosic origin

Activated carbon adsorbents were prepared by phosphoric acid activation of fruit stones in an argon atmosphere at various temperatures in the 400-1000 °C range and at different acid/precursor impregnation ratios (0.63-1.02). The surface chemistry of the carbons was investigated by elemental analysis, cation exchange capacity (CEC, measured by neutralization of NaOH with acidic surface groups), infrared spectroscopy and potentiometric titration. Porous structure was derived from adsorption isotherms (N₂ at −196 °C and CO₂ at 0 °C). It was demonstrated that all carbons show considerable cation exchange capacity, the maximum (CEC = 2.2 mmol g⁻¹) being attained at 800 °C, which coincides with the maximum contents of phosphorus and oxygen. The cation exchange properties of phosphoric acid activated carbons from fruit stones are chemically stable in very acidic and basic solutions. Proton affinity distributions of all carbons show the presence of three types of surface groups with pK at 2.0-3.3, 4.6-5.9 and 7.6-9.1. These pK ranges were ascribed primarily to: (a) phosphorus-containing and carboxylic groups; (b) lactonic groups, and (c) phenolic groups, respectively. Phosphoric acid activated carbons are microporous with a relatively small contribution of mesopores. A maximum BET surface area of 1740 m² g⁻¹ was attained at 400 °C.     

New quality criteria in wastewater reuse : The case of Gran Canaria

Wastewater reuse plays a key role in this vital cycle of water because it is able to reduce the wastewater spilled. Simultaneously, the supply of water for specific uses is increased. A new regulation (Royal Decree 1620/2007) came into force in Spain in December 2007 and regulates the basic conditions for the wastewater reuse and establishes the required criteria of quality to waters according to use.In the present paper, different kinds of tertiary treatments in reuse of wastewater are described. We focused on the applied tertiary treatments in most wastewater treatment plants of Gran Canaria Island. Particularly, we analysed Hoya del Pozo wastewater treatment plant due to its wide number of technologies and processes.Finally, we reviewed the quality criteria used in the regenerated waters, in agreement with the new regulations.     

Advancements in the Field of Direct Steam Generation in Linear Solar Concentrators—A Review

Direct steam generation in parabolic trough or linear Fresnel collectors represents one interesting technological option for concentrating solar electricity production. Today's state of the art characterized by the first commercial plants in operation is a result of more than 20 years of intensive research on this topic. This article provides a review on the key results from research that includes physical effects like heat transfer and pressure drop in horizontal boiler tubes, plant layout considerations, and thermal storage options. An overview on test and demonstration facilities as well as on commercial plants is given, leading to an outlook on the next generation of direct steam generation systems.     

Information technology in Nigerian banks: The limits of expectations

In the last ten years, banks in developed countries have been investing more and more in information technology (IT) as a means to reduce costs and improve operational efficiency. An investigation of the application of IT in Nigerian banks was carried out in order to determine the expectations and success of IT implementations in the sector. The data were generated from a survey of randomly selected branches of 56 banks in Lagos, the commercial capital of Nigeria. Almost all the banks had an IT policy, the main thrusts of which where to achieve full application of IT, to be able to meet organisational goals, to secure competitive advantage, and to be up to date. Only 54.6% of them actually achieved some measure of successful implementations. The expected benefits of investment in IT were realised in only a relatively few number of banks. The consequence was that less than 40% of the banks were poised to maximise the benefits of IT through major investments, especially in the areas of online access and transactions, electronic commerce, and electronic publishing. It is estimated that at least 60% of the branches of these banks are spending less than $150,000 annually on IT. An upsurge of investment is, however, expected, first by the banks that style themselves as progressive and have already made some success in IT implementations, and later by the other banks.     

Novel low-voltage low-power high-precision CCII± based on bulk-driven folded cascode OTA

This paper presents possible approaches to the design of a novel low-voltage, low-power, and high-precision current conveyor of the second generation (CCII±) based on the bulk-driven folded cascode operational transconductance amplifier (OTA) with extended input common-mode voltage range. This CCII± utilizes bulk-driven differential pairs to obtain a nearly rail-to-rail input stage at a low supply voltage. The proposed conveyor operates at a low supply voltage of ±400 mV with a reduced power consumption of only 64 μW. A current-mode multifunction filter is presented as an application of the CCII±. This filter provides five transfer functions simultaneously, namely low-pass, band-pass, high-pass, notch, and all-pass. The filter has the following properties and advantages: it employs three bulk-driven current conveyors BD-CCII±, three grounded resistors, and two grounded capacitors, which is suitable for integrated circuit implementation. Furthermore, the input signal is connected to the low-impedance X terminal of the BD-CCII± whereas the output signals are taken from the high-impedance output terminals Z+ and Z−. Finally, the pole frequency and quality factor of the designed filter are tunable independent of each other. PSpice simulation results using the 0.18 μm CMOS technology are included to prove the results.     

Making Epothilones Fluoresce: Design,Synthesis, and Biological Characterization of a Fluorescent N12‐Aza‐Epothilone (Azathilone)

A green fluorescent 12‐aza‐epothilone (azathilone) derivative has been prepared through the attachment of the 4‐nitro‐2,1,3‐benzoxadiazole (NBD) fluorophore to the 12‐nitrogen atom of the azamacrolide core structure. While less potent than natural epothilones or different N12‐acylated azathilone derivatives, NBD‐azathilone ( 3 ) promotes tubulin assembly, inhibits cancer cell proliferation in vitro and arrests the cell cycle at the G2/M transition. Most significantly, the binding of 3 to cellular microtubules (MTs) could be directly visualized by confocal fluorescence microscopy. Based on competition binding experiments with laulimalide‐stabilized MTs in vitro, the N12‐Boc substituted azathilone 1 , Epo A, and NBD‐azathilone ( 3 ) all interact with the same tubulin‐binding site. Computational studies provided a structural model of the complexes between β‐tubulin and 1 or 3 , respectively, in which the NBD moiety of 3 or the BOC moiety of 1 directly and specifically contribute to MT binding. Collectively, these data demonstrate that the cellular effects of 3 and, by inference, also of other azathilones are the result of their interactions with the cellular MT network.