PAA-PSF交联复合膜的制备及对低浓度有机醇水溶液反渗透分离性能研究

进行了ＰＡＡ（ＰｏｌｙａｃｒｙｌｉｃＡｃｉｄ）－ＰＳＦ（Ｐｏｌｙｓｕｌｆｏｎｅ）交联复合膜的制备，研究了交联剂、添加剂对膜性能的影响，并通过扫描电镜观察了膜的断面结构．研究了ＰＡＡ－ＰＳＦ交联复合膜对低浓度有机醇类水溶液反渗透分离性能．发现对于１０００×１０－６乙醇水溶液截留率达到６６．２％，透过流束可达０．９×１０－６（ｍ３·ｍ－２·ｓ－１）．随醇的分子量的增加，截留率不断上升，对戊醇的截留率达９４．３％，而透过流束则保持相对稳定．对不同结构醇类的分离性能研究表明，截留率存在有：ｔｅｒｔ－＞ｓｅｃ－＞ｉｓｏ－＞ｎ－的规律．     

Formation Mechanism of MoO3-Doped YSr2Cu3Oy Using the Citrate Process

The formation mechanism of the synthesis of MoO₃-doped YSr₂Cu₃O _y powders using the citrate process was investigated. It was shown that the precursor phase (Sr_{1- x} Y _x )₁₄Cu₂₄O₄₁ played a crucial role in forming the superconducting phase. It was found that the precursor phase (Sr_{1- x} Y _x )₁₄Cu₂₄O₄₁ interacted with water and decomposed when it was heavily milled and heated.     

Progress in the study of mechanism of fetal scarless wound healing

From January 1987 to December 1993, 426 patients with lung cancer were operated in our hospital, among which 159 patients were diagnosed postoperatively to be N2 disease by pathology including 81 central type and 78 peripheral type lung cancer. Radical operations were performed on 135 cases, palliative operations on 24 cases. Follow up study: one-year survival rate was 71.7%, three-year survival rate 29.0% and five-year survival rate 21.7%. The main factors affecting operative results are tumor cell type, the number and location of metastatic lymph nodes and the thoroughness of dissection. Tumor staging, except T4 tumor is not a main factor influencing prognosis. The indications of operation performed on N2 lung cancer and the necessity of extensive nodal exenteration are also discussed in this article. We consider extensive hilar and mediastinal nodal exenteration necessary in order to achieve radical resection and good prognosis.     

泥沙起动条件及机理的非线性研究

 分析了单颗粒、均匀沙及非均匀沙的起动现象及其机理，认为泥沙的起动属于突变论研究的范畴。从泥沙起动所遵循起动条件的力学规律出发，导出泥沙起动条件方程。在此基础上，利用尖点突变性质对各种泥沙起动现象及机理进行了描述和说明。     

ATM局域网仿真体系结构的研究

本文在简要叙述了基于ＡＴＭ技术进行局域网仿真的原理后，对局域网仿真体系结构作了一些探讨。考虑的重点是无连接服务和群播功能的实现     

平面分层介质结构全波分析综述

本文综述了广义谱域导抗法，直线法及直线法的快速算法，全波离散镜象法等主要方法，并对各种方法的特点进行了比较，这些方法可有效地处理平面分层介质结构问题，文中包括作者近期的研究成果。     

Effects of the hob cutter regrinding and setting on ZE-type worm gear manufacture

A mathematical model for a ZE-type worm gear set is proposed. The characteristics of a ZE-type worm gear cut with an oversize hob cutter are investigated. Bearing contacts and kinematic errors in the ZE-type worm gear set due to regrinding of oversize hob cutters are also studied. Bearing contacts in the worm gear set were obtained using surface separation topology techniques and tooth contact analysis. It was found that bearing contact locations are sensitive to the hob cutter setting angle and setting distance. Kinematic error minimization was achieved modifying worm normal tooth angle. By applying the optimization theorem and computer simulation programs, optimum hob cutter settings and worm normal tooth angle were determined to improve bearing contact location and minimize the worm gear set kinematic errors. A numerical example is given to demonstrate the results of the investigation. The developed computer-aided manufacture program has successfully been applied to the worm gear manufacture and hob cutter design.     

A novel ultracompact two-mode-interference wavelength division multiplexer for 1.5-/spl mu/m operation

A novel ultracompact 2/spl times/2 wavelength division multiplexer (WDM) for 1.55-/spl mu/m operation based on highly dispersive two-mode interference (TMI) was designed, theoretically modeled, and verified using a finite-difference-time-domain (FDTD) method. A two-moded waveguide assisted with a dispersive tooth-shaped grating provided a mode-dependent reflection band of central wavelength at 1.55 /spl mu/m. The wavelengths of 1538 and 1572 nm that were at the band edges and had the lowest reflection losses and relatively high dispersion were selected for wavelength multiplexing. The result showed that the wavelengths were separated by grating dispersion in a coupler length of 75 /spl mu/m which was much shorter than the required length of 1.1 mm in a regular TMI multiplexer of no grating. Insertion loss of about 1.7 dB and channel contrast of about 12 dB were achieved.     

基于SOCKS协议的IPv6/IPv4转换器

介绍了IPv6协议出现和IPv6和IPv4将长期共存的必然性。讨论了从IPv4到IPv6的各种过渡机制，包括IPv4网络中IPv6域间互联的机制及IPv6节点及IPv4节点间通信的机制。实现了一个IPv6／IPv4转换器，该转换器利用了SOCKS协议和6to4隧道方式。最后分析了这个转换器的适用性和特点。     

浅谈“水源空调“在丹东市的推广使用

本文通过对“水源空调”的介绍,结合丹东市的地质情况,分析论证其在我市推广使用的可行性。