平面分层介质结构全波分析综述

本文综述了广义谱域导抗法，直线法及直线法的快速算法，全波离散镜象法等主要方法，并对各种方法的特点进行了比较，这些方法可有效地处理平面分层介质结构问题，文中包括作者近期的研究成果。     

Effects of the hob cutter regrinding and setting on ZE-type worm gear manufacture

A mathematical model for a ZE-type worm gear set is proposed. The characteristics of a ZE-type worm gear cut with an oversize hob cutter are investigated. Bearing contacts and kinematic errors in the ZE-type worm gear set due to regrinding of oversize hob cutters are also studied. Bearing contacts in the worm gear set were obtained using surface separation topology techniques and tooth contact analysis. It was found that bearing contact locations are sensitive to the hob cutter setting angle and setting distance. Kinematic error minimization was achieved modifying worm normal tooth angle. By applying the optimization theorem and computer simulation programs, optimum hob cutter settings and worm normal tooth angle were determined to improve bearing contact location and minimize the worm gear set kinematic errors. A numerical example is given to demonstrate the results of the investigation. The developed computer-aided manufacture program has successfully been applied to the worm gear manufacture and hob cutter design.     

铝电解槽料箱排气管结构的优化改造

简要介绍了铝电解槽料箱排气管在原设计上存在的缺陷和不足，针对缺陷产生的原因进行了结构优化改造。     

考虑初始椭圆度的套管抗载能力分析

针对套管的不同初始椭圆度建立了套管、水泥环、地层平面应变力学模型。分析认为，在非均匀地应力作用下，套管内壁的径向变形较大，抗载能力明显降低，破坏主要是由地下非均匀地应力引起的；随着初始椭圆度的增加，在地应力作用下套管各部位产生的应力分布不均程度增大，使得套管抗外载能力减弱。建议在生产和使用过程中应严格将套管椭圆度控制在规定的范围内，从而提高套管的抗载能力。     

A novel ultracompact two-mode-interference wavelength division multiplexer for 1.5-/spl mu/m operation

A novel ultracompact 2/spl times/2 wavelength division multiplexer (WDM) for 1.55-/spl mu/m operation based on highly dispersive two-mode interference (TMI) was designed, theoretically modeled, and verified using a finite-difference-time-domain (FDTD) method. A two-moded waveguide assisted with a dispersive tooth-shaped grating provided a mode-dependent reflection band of central wavelength at 1.55 /spl mu/m. The wavelengths of 1538 and 1572 nm that were at the band edges and had the lowest reflection losses and relatively high dispersion were selected for wavelength multiplexing. The result showed that the wavelengths were separated by grating dispersion in a coupler length of 75 /spl mu/m which was much shorter than the required length of 1.1 mm in a regular TMI multiplexer of no grating. Insertion loss of about 1.7 dB and channel contrast of about 12 dB were achieved.     

基于SOCKS协议的IPv6/IPv4转换器

介绍了IPv6协议出现和IPv6和IPv4将长期共存的必然性。讨论了从IPv4到IPv6的各种过渡机制，包括IPv4网络中IPv6域间互联的机制及IPv6节点及IPv4节点间通信的机制。实现了一个IPv6／IPv4转换器，该转换器利用了SOCKS协议和6to4隧道方式。最后分析了这个转换器的适用性和特点。     

浅谈“水源空调“在丹东市的推广使用

本文通过对“水源空调”的介绍,结合丹东市的地质情况,分析论证其在我市推广使用的可行性。     

有梭织机光电探纬系统的改进

依据红外反射式光电探纬的组成和工作原理，对有梭织机光电探纬系统进行了改进。将反光装置（膜）固定在梭芯上，减少了反光装置的数量，无需改动梭子和纬管，系统探纬准确，减少了换梭时纡脚回丝。     

组织协同进化分类算法用于雷达目标一维像识别

针对雷达目标一维像识别问题，提出了一种基于组织协同进化分类算法的识别方法．该方法与现有进化分类方法的不同之处在于它的进化操作直接作用于样本而不是规则，采用了一种自下而上的搜索机制，即先使若干样本的集合得到进化，再从进化结果中提取规则．这样有利于避免在进化过程中产生无意义的规则．该方法不需要进行特征提取；对于高维数据，不需要预先进行降维处理；没有复杂的运算，训练和识别的速度都很快．对3种飞机微波暗室实测数据的识别实验表明，该方法性能稳定，优于基于支撑矢量机与子波核函数的方法，识别率均达到了96％以上．实验中还对算法的抗噪能力进行了测试，获得了良好的效果．     

泥土中微量六氯环戊二烯的气相色谱分析

采用SE 3 0为固定液进行色谱柱分离 ,用外标定量法测定泥土中的微量六氯环戊二烯 ,结果最小检知量为 0 .18× 10 - 6 ,相关系数为 0 .99992。