This work is based on formulating and optimizing controlled release (CR) valsartan (160 mg) tablets using different viscosity grades of the cellulosic polymer. The objective was to develop an effective once-daily drug delivery system of this cardiovascular agent. Central composite design was used for designing the formulations. Polymers used were Methocel® K4M, K15M and K100M. Compatibility of excipients with active was studied through FT-IR. Micromeritic properties were determined and formulations exhibiting appropriate flow characteristics were compressed. Swelling behavior and in vitro buoyancy effect were studied and response surface curves were constructed to optimize the formulation. Multi-point dissolution profiles of valsartan CR tablets at pH 1.2, 4.5 and 6.8 were obtained. Model-dependent and model-independent methods were performed including f2, stability test as per ICH guidelines and ANOVA. FT-IR studies revealed the compatibility of valsartan with all excipients. Formulation K4T9 (containing 25% K4M polymer) was selected to be the best optimized trial, based on physical properties and controlled release profile (23% at 4 h, 82% at 16 h and 100% at 24 h). Results of buoyancy and swelling behavior indicated that HPMC-K4M polymer exhibited excellent floating lag time and swelling indexes. In vitro drug release kinetics showed that formulation K4T9 displayed Korsmeyer–Peppas drug release pattern with r value > 0.99. The manufacturing process of K4T9 was also found to be reproducible with a shelf life period of 41 and 36 months at room temperature and accelerated conditions, respectively. Valsartan CR matrix-based formulation was successfully prepared with Methocel K4M retardant. 相似文献
A novel biobased plasticizer made of cardanol is designed for poly(lactide) (PLA). This cardanol‐derived plasticizer, i.e., methoxylated hydroxyethyl cardanol (MeCard), is synthesized through methoxylation of the double bonds on the side chain of cardanol, and characterized by 1H NMR and mass spectrometry. The plasticization effect of MeCard on the molecular structure, morphology, thermal and mechanical properties of PLA is evaluated and compared to that of a commercial cardanol, i.e., hydroxyethyl cardanol (pCard). The plasticization efficiency of MeCard is demonstrated by a substantial decrease of the glass transition temperature and storage modulus together with a significant increase of the elongation at break as compared to neat PLA. Moreover, MeCard exhibits higher plasticization performance than pCard toward PLA. Such behavior is related to a higher miscibility and compatibility between PLA and MeCard thanks to the methoxylation of the double bonds on the side chain of cardanol as shown by SEM micrographs.
The color of polymer solar cells using an opaque electrode is given by the reflected light, which depends on the composition and thickness of each layer of the device. Metal‐oxide‐based optical spacers are intensively studied in polymer solar cells aiming to optimize the light absorption. However, the low conductivity of materials such as ZnO and TiO2 limits the thickness of such optical spacers to tenths of nanometers. A novel synthesis route of cluster‐free Al‐doped ZnO (AZO) nanocrystals (NCs) is presented for solution processing of highly conductive layers without the need of temperature annealing, including thick optical spacers on top of polymer blends. The processing of 80 nm thick optical spacers based on AZO nanocrystal solutions on top of 200 nm thick polymer blend layer is demonstrated leading to improved photocurrent density of 17% compared to solar cells using standard active layers of 90 nm in combination with thin ZnO‐based optical spacers. These AZO NCs also open new opportunities for the processing of high‐efficiency color tuned solar cells. For the first time, it is shown that applying solution‐processed thick optical spacer with polymer blends of different thicknesses can process solar cells of similar efficiency over 7% but of different colors. 相似文献
Tungsten oxide nanostructures functionalized with gold or platinum NPs are synthesized and integrated, using a single‐step method via aerosol‐assisted chemical vapour deposition, onto micro‐electromechanical system (MEMS)‐based gas‐sensor platforms. This co‐deposition method is demonstrated to be an effective route to incorporate metal nanoparticles (NP) or combinations of metal NPs into nanostructured materials, resulting in an attractive way of tuning functionality in metal oxides (MOX). The results show variations in electronic and sensing properties of tungsten oxide according to the metal NPs introduced, which are used to discriminate effectively analytes (C2H5OH, H2, and CO) that are present in proton‐exchange fuel cells. Improved sensing characteristics, in particular to H2, are observed at 250 °C with Pt‐functionalized tungsten oxide films, whereas non‐functionalized tungsten oxide films show responses to low concentrations of CO at low temperatures. Differences in the sensing characteristics of these films are attributed to the different reactivities of metal NPs (Au and Pt), and to the degree of electronic interaction at the MOX/metal NP interface. The method presented in this work has advantages over other methods of integrating nanomaterials and devices, of having fewer processing steps, relatively low processing temperature, and no requirement for substrate pre‐treatment. 相似文献
The influence of secondary phases (illite, quartz) on the geopolymerization reaction of metakaolin has been investigated by comparing two metakaolins, one prepared from a pure kaolinite and the other from illite- and quartz-containing Algerian kaolin from the Tamazert region, respectively. Geopolymerization was achieved by mixing the metakaolins with an alkaline sodium silicate solution at room temperature and curing at 50 °C. The products were characterized by X-ray diffraction and 29Si and 27Al MAS-NMR. The results show that the secondary phases, at the concentration used in this work, do not prevent the geopolymerization reaction. 相似文献
This paper presents a multiscale corner detection method in planar shapes, which applies an undecimated Mexican hat wavelet decomposition of the angulation signal to identify significant points on a shape contour. The advantage of using this wavelet is that it is well suited for detecting singularities as corners and contours due to its excellent selectivity in position. Thus, this wavelet plays an important role in our approach because it identifies changes in non-stationary angulation signals, and it can be extended to multidimensional approaches in an efficient way when approximating this wavelet by difference of Gaussians. The proposed algorithm detects peaks on a correlation signal which is generated from different wavelet scales and retains relevant points on the decomposed angulation signal while discards poor information. Our approach assumes that only peaks which persist through several scales correspond to corners. Furthermore, we introduce a novel procedure to tune parameters for the corner detection algorithms that corresponds to the best relation between Precision and Recall measures. This technique guides the parameter adjustment of the algorithms according to the image database and it improves their performance with regard to true corner detection. Concerning the performance assessment of the algorithms, we compare the proposed one to other corner detectors by using Precision and Recall measures which are based on ground-truth information. Tests were carried out using more than a hundred images from a non-homogenous database that contains noisy and non-noisy binary shapes. 相似文献
The conception of net zero energy buildings (NZEB) has been introduced to limit energy consumption and pollution emissions in buildings. Classification of NZEB is based on renewable energy (RE) supply options, energy measurement process, RE-sources location, and balances whether are energetic or exergetic. In general, it is traditionally agreed that there are three main steps to reach the NZEB performance, starting through the use of passive strategies, energy efficient technologies, and then RE generation systems. Then, these three steps could be accompanied with the smart integration of advanced efficient energy technologies. A state of the art shows that the main ZEB studies are related to: energy savings, reduce electric bills, energy independence, pollution reduction, and occupants comfort, in addition, others are more interested in the aesthetic aspect by combining modern technologies with innovations to achieve high energy and sustainability performance. Building optimization is a promising technique to evaluate NZEB design choices; it has been adopted to choose the perfect solution to reach the zero energy performance through the optimization of an objective function related to energy (thermal loads, RE generation, energy savings) and/or environment (CO2 emissions) and/or economy (life-cycle cost (LCC), net-present value (NPV), investment cost). This paper starts by presenting the global energetic and pollution challenges the world faces. Moreover, it shows, to the best to the author’s knowledge, the existing NZEB definitions and the corresponding case studies investigated in 8 different climatic zones (humid continental, humid subtropical, Mediterranean, moderate continental, moderate continental, marine west coast, tropical, semi-arid and hot), the paper also focus on the importance to treat each climate separately. Even in the same country, two or more climates may co-exist. NZEBs drawbacks are also presented. Furthermore, different optimization problems are reviewed in the last section. Building energy optimization methods are employed to obtain the ideal solution for specific objective functions which are either related to energy, and/or environment and/or economy. Optimization variables are distributed between passive and/or RE generation systems. Finally, a table summarizing the most commonly used electric and thermal RE applications which yield to the zero energy balance in each climate, as well as three flowcharts are presented to summarize the whole three-stage procedure, to reach NZEB, starting from building designing, passing through the optimization procedure, and lastly categorizing the zero energy balance. 相似文献
Dolomite powder from Ouled Mimoun, Tlemcen (western region of Algeria) was thermally treated within the temperature range 450-1000 °C. The modifications undergone by dolomite, inherent to thermal treatment, were investigated from X-ray diffraction patterns. The results were also discussed using scanning electronic microscopy and nitrogen adsorption. The XRD data, analysed from X Pert Plus program, showed that the dolomite phase ceases at 700 °C and is relayed by the formation of in situ calcite and periclase. The crystallographic parameters of these two phases tend towards that of pure periclase and calcite at 1000 and 900 °C, respectively. SEM analysis indicated that the morphological properties were profoundly affected. SEM images of D-1000 (sample treated at 1000 °C) indicated that the original particle shape of dolomite (presence of discrete grains having sharp edges with presence of cleavages) was totally destroyed, leading to small spherical particles with a diameter of 0.1 μm. The specific surface area value of D-1000 increased more than 6 times against that of the raw dolomite. Adsorption of azo-dye Orange I from aqueous solutions onto untreated and treated dolomites was also reported. The isotherms were of L-type. The interaction was explained by electrostatic considerations between sulfonate groups of the dye (D-SO3Na), which are dissociated in the aqueous system, and positively charged adsorption sites. The affinity of orange I for the dolomitic solids follows the sequence D-900 > D-1000 > D-800 > > D-600 > raw dolomite. The maximum retention capacity shown by D-900 was explained and correlated with its crystallographic properties. 相似文献
A new oligomeric surfactant: N,N,N′,N″,N″- pentamethyl diethyleneamine—N,N″-di-[tetradecylammonium bromide] referred to as 14-2-N(CH3)-2-14 was synthesized, purified and characterized by Elemental Analysis, 1H and 13C NMR and Electrospray. The micellar properties of this compound were determined by electrical conductivity and surface tension
methods. Optical microscopy was also employed to study the behavior of anhydrous surfactant and the binary water/surfactant
system as a function of temperature. The critical micellar concentration (cmc), degree of counterion binding and thermodynamic
parameters of micellization (standard molar Gibbs energy, enthalpy and entropy of micellization) were determined by electrical
conductivity measurements in the temperature range [24–54 °C]. Surface tension measurements also provide information about
the dependence of the surface tension at the cmc (γcmc), pC20 (negative logarithm of the surfactant’s molar concentration C20, required to reduce the surface tension by 20 mN/m, the surface excess (Γmax) at air/solution interface, the minimum area per surfactant molecule at the air/solution interface (Amin), surface pressure
at the cmc (Пcmc), critical packing parameter(CPP) and the standard free energies of micellization (
\Updelta Gm0\Updelta G_{m}^{0}) and of adsorption (
\Updelta G\textads0 \Updelta G_{\text{ads}}^{0} ). 相似文献