Recurrence and death in non-small cell lung carcinomas: a prognostic model using pathological parameters, microvessel count, and gene protein products

Optimized stent expansion by high-pressure inflations of oversized balloons has initially been derived from experience obtained with the Palmaz-Schatz stent, whereas there is little experience with this strategy in the Wallstent. By using this approach with quantitative coronary angiographic guidance, 20 Wallstents and 20 Palmaz-Schatz stents were implanted in 34 patients and consecutively examined by conventional two-dimensional (2D) intracoronary ultrasound (ICUS) and three-dimensional (3D) ICUS on the basis of the application of a pattern recognition algorithm. Ultrasound criteria of adequate stent expansion were defined as a complete apposition of the stent to the vessel wall, a stent symmetry index (SSI = minimum/maximum lumen diameter) > or = O.7, and a stent-reference lumen area ratio (SRR = Minimum intrastent lumen area/Average of proximal and distal reference lumen area) > or = O.8. In all cases a smooth angiographic lumen and a negative diameter stenosis, on the basis of a distal reference, was achieved. For the Wallstents ICUS showed a higher SSI (2D, 0.95 +/- 0.04 vs 0.85 +/- 0.09; p < 0.001; 3D, 0.90 +/- 0.09 vs 0.82 +/- 0.11, p < 0.05) and a lower SRR (2D, 0.66 +/- 0.12 vs 0.81 +/- 0.13, p < 0.005; 3D, 0.63 +/- 0.14 vs 0.74 +/- 0.15, p < 0.05) than for the Palmaz-Schatz stents. Ninety percent of failure in meeting these criteria resulted from a low SRR. The incidence of incomplete stent apposition (one in both stents) or SSI <0.7 was low and generally associated with an SRR <0.8. The Wallstents met the ICUS criteria less often (2D, 2(1O%) vs 10(50%), p < 0.01; 3D, 3(15%) vs 9(45%), p < 0.05), were significantly longer (35.1 +/- 7.7 mm and 14.3 +/- 3.3 mm, p < 0.0001), and generally demonstrated a larger vessel tapering, measured as proximal minus distal ICUS reference lumen area (1.33 +/- 2.91 mm2 vs 0.44 +/- 1.97 mm(2), not significant). Wallstents meeting the ICUS criteria, however, showed less vessel tapering (0.18 +/- 1.64 mm(2)). Thus optimized stent expansion was followed by excellent angiographic results for both Palmaz-Schatz and Wallstent. Although angiographic results and visual assessment of the ICUS examination suggested a good outcome, few Wallstents met the ICUS criteria in contrast to the Palmaz-Schatz stents. The low value of the SRR in the Wallstents is likely to be caused by vessel tapering, suggesting that this criterion may be unsuitable in assessing the adequacy of the expansion of relatively long stents such as the Wallstent.     

Portosystemic shunt in Budd-Chiari syndrome: long-term survival and factors affecting shunt patency in 25 patients in Western countries

BACKGROUND: In Budd-Chiari syndrome (BCS) treated by portosystemic shunt, postoperative shunt thrombosis is associated with high morbidity and mortality rates. The aim of this study was to determine factors associated with shunt thrombosis. METHODS: From 1985 to 1991, 25 patients underwent portosystemic shunt for BCS. According to the patency of the shunt during the postoperative period and follow-up, patients were divided into two groups including 17 patients with patent shunt and 8 (32%) with shunt thrombosis. RESULTS: In patients with patent shunt, actuarial survival rate at 5 years was 87% versus 38% in patients with shunt thrombosis (p < 0.05). Duration of symptoms before operation was higher in patients with shunt thrombosis than in patients with patent shunt (315 +/- 483 vs 109 +/- 168 days, p < 0.05). In patients with patent shunt, extensive fibrosis or cirrhosis was observed in 3 of 17 (18%) versus in 5 of 8 (63%) of patients with shunt thrombosis (p < 0.05). Shunt thrombosis was observed in 3 of 3 patients (100%) with the combination of myeloproliferative disorder, duration of symptoms more than 100 days, and cirrhosis versus 0 of 6 (0%) patients without this combination (p < 0.05). CONCLUSIONS: In acute form of BCS (with short history of the disease and absence of extensive fibrosis or cirrhosis), early portal decompression is mandatory, with low risk of shunt thrombosis and good long-term results. In chronic form of BCS, the risk of shunt thrombosis is high and long-term results are bad; in these patients, orthotopic liver transplantation must be considered.     

Detection of human papillomavirus gene sequences in laryngeal tumors and premalignant changes by polymerase chain reaction

Human papillomavirus gene sequences have been detected in a number of malignant and benign tumours. Non-oncogenic types 6 and 11 are etiological factors of benign mucosal tumours. Types 16 and 18 can be detected in malignancies most often but their role in the etiopathogenesis of cancers is still unclear. In our study we examined formalin-fixed and paraffin-embedded archive laryngeal tissues containing squamous cell carcinoma, papilloma and precancerous lesions for the presence of human papillomavirus genes. As a control we also examined tissues harbouring laryngeal nodules which represented the normal larynx in our study. After DNA preparation from the paraffin blocks we performed polymerase chain reaction to detect the DNA of human papillomavirus types 6, 11, 16 and 18. In the squamous cell carcinomas, papillomas and precancerous lesions the presence of human papillomavirus gene sequences was significantly higher than in the control group. To verify the integrity of DNA we also amplified a sequence deriving from the cellular beta-globin gene. Based on the 100% positivity for this gene we declare that the combination of our DNA preparation and polymerase chain reaction is a reliable method for detecting DNA sequences from formalin-fixed and paraffin-embedded tissues.     

Use of the nuclear microprobe at the University of Arizona for the study of heavy metal deposition in rabbit renal tissue

Industrial wastes consigned to disposal sites frequently contain substantial amounts of heavy metals. We have successfully applied proton induced X-ray emission analysis (PIXE) in the conduct of heavy metal (Hg, Cd, Cr, As) toxicity studies using precision cut rabbit renal cortical slices. The large beam diameter (4000 μm) of the proton macroprobe at The University of Arizona Ion Beam Analysis facility allowed an overall concentration of the metal(s) of interest in the samples to be determined, but lacked the ability to resolve point concentrations in the tissue. The ability to locate these areas has now been made available to us with the addition of a rastering microprobe (μ-PIXE) to the facility. Studies now being conducted in our laboratory using this micro-technique include analysis of renal tissue taken from rabbits injected intraperitoneally with HgCl₂, K₂Cr₂O₇, and NaAsO₂. The small beam size (3 μm) and the ability to raster this beam over areas of up to 125 μm × 125 μm has allowed regional mapping of endogenous and non-endogenous metal concentrations and revealed trends in heavy metal deposition in in vivo treated renal tissue, significantly increasing the amount of information obtained from these animal studies using PIXE alone. The combination of small beam size, high resolution, and multi-element detection makes μ-PIXE a powerful tool for investigating the impact of non-endogenous metals on the kidney.     

Rheological behaviour of processed avocado pulp emulsions

Shear rate vs. shear stress data were obtained on avocado pulp in water emulsions using a concentric cylinder rheometer and fitted to a power law model. Dilution, as volume fraction of water, had a pronounced effect on the apparent viscosity of the pulp emulsions and the Richardson equation, (η_R= exp.( a φ) for the emulsion viscosity fitted the data well. A mean slope coefficient, a , of 4.57 can be used as a first approximation. Enzymatic treatment (40°C, 1 h), is slightly more effective than thermal treatment (65°C, 1 h), in reducing the initial apparent viscosity of the pulp-water emulsions     

Reactive energy measurement using frequency controlled analog-to-pulse-rate converter

Contents This paper analyzes a problem of phase shifting and deseribes a novel method for electronic reactive energy measurement. The proposed measurement structure, composed of an integrator as a phase shifting circuit and a frequency controlled analog-to-pulse-rate converter, provides for the measurement completely in accordance with IEC definition of reactive energy, which is performed with simple but high performance metering device.

---

Die Blindverbrauchsmessung anhand eines netzsynchronisierten Analog-Frequenz-Wandlers

Übersicht In diesem Artikel wird das Problem der Phasenverschiebung analysiert und eine neue Meßmethode für elektronische Blindverbrauschsmessung aufgezeigt. Die vorgeschlagene Strucktur, bestehend aus einem Integrator als Phasenschieber und netzkontrolliertem Analog-Frequenz-Wandler, ermöglicht die Verwirklichung eines einfachen aber präzisen Elektrizitätszählers zur Messung der Blindenergie, dessen Arbeitsprinzip mit den IEC Empfehlungen vollkommen übereinstimmt.

     

A General Reliable Quadratic Form: An Extension of Affine Arithmetic

In this article, a new extension of affine arithmetic is introduced. This technique is based on a quadratic form named general quadratic form. We focus here on the computation of reliable bounds of a function over a hypercube by using this new tool. Some properties of first quadratic functions and then polynomial ones are reported. In order to show the efficiency of such a method, ten polynomial global optimization problems are presented and solved by using an interval branch-and-bound based algorithm. The work of the first author was also supported by the Laboratoire de Mathématiques Appliquées CNRS–FRE 2570, Université de Pau et des Pays de l'Adour, France, and by the Laboratoire d'Electrotechnique et d'Electronique Industrielle CNRS–UMR5828, Group EM³, INPT–ENSEEIHT.     

High-Pressure (up to 140 MPa) Dynamic Viscosity of the Methane and Toluene System: Measurements and Comparative Study of Some Representative Models

The dynamic viscosity of toluene and methane mixtures containing 25.03, 37.19, 49.95, 64.11, and 95.00 mol% methane has been measured using a falling-body viscometer. The measurements (280 data points) have been performed in the temperature range 293.15 to 373.15 K and at pressures up to 140 MPa. The data have been discussed in the framework of recent representative models (hard-sphere scheme, friction theory, and free-volume model) as well as with simple mixing laws and empirical models (particularly the LBC model and the self-referencing model) used in the literature. This comparative study shows that the average absolute deviation of the models is between 4.9 and 26.8%, and the maximum deviation is between 11.6 and 49.5%.