Comparison of species profiles between O2 and NO2 oxidizers in premixed methane flames

The profiles of the species H, OH, CH, NH, CN, NCO, NO₂, and CH₃O are compared in a series of five premixed stoichiometric 15-torr CH₄/O₂/NO₂/N₂ flames with NO₂ comprising between 0% and 40% of the oxidizer. Relative species concentrations were measured by laser-induced fluorescence (LIF) and these results are compared with calculations using measured temperature profiles. The reaction mechanism of Miller and Bowman incorrectly predicts the standoff from the burner in flames containing more than 20% NO₂; addition of several reactions involving NO₂ and HONO produces excellent agreement with experiment for most species. The reaction CH₃ + NO₂ → CH₃O + NO is found to be particularly important in the reaction mechanism. LIF profiles of CH₃O show this species to be present in far larger quantities in the NO₂ supported flames than in the CH₄/O₂ system. The nitrogen-containing intermediates CN, NCO, and NH are all overpredicted by a factor of two in the 40% NO₂ flame relative to the 10% NO₂ flame. This indicates an inaccuracy in either the reburn reactions or the fuel nitrogen chemistry when large amounts of NO are present. The kinetic modeling shows that in the 40% NO₂ flame, the dominant pathway to N₂ formation is through N₂O, which is produced primarily by the reaction of NCO with NO. Comparison of emission profiles of NO₂* for the various flames indicates that the appearance of an orange-yellow luminous zone at the base of NO₂ supported flames is caused by thermal excitation of NO₂, not by a chemiluminescence mechanism.     

Evaluation of conventional and alternative monitoring methods for a recreational marine beach with nonpoint source of fecal contamination

The objectives of this work were to compare enterococci (ENT) measurements based on the membrane filter, ENT(MF) with alternatives that can provide faster results including alternative enterococci methods (e.g., chromogenic substrate (CS), and quantitative polymerase chain reaction (qPCR)), and results from regression models based upon environmental parameters that can be measured in real-time. ENT(MF) were also compared to source tracking markers (Staphylococcus aureus, Bacteroidales human and dog markers, and Catellicoccus gull marker) in an effort to interpret the variability of the signal. Results showed that concentrations of enterococci based upon MF (<2 to 3320 CFU/100 mL) were significantly different from the CS and qPCR methods (p < 0.01). The correlations between MF and CS (r = 0.58, p < 0.01) were stronger than between MF and qPCR (r ≤ 0.36, p < 0.01). Enterococci levels by MF, CS, and qPCR methods were positively correlated with turbidity and tidal height. Enterococci by MF and CS were also inversely correlated with solar radiation but enterococci by qPCR was not. The regression model based on environmental variables provided fair qualitative predictions of enterococci by MF in real-time, for daily geometric mean levels, but not for individual samples. Overall, ENT(MF) was not significantly correlated with source tracking markers with the exception of samples collected during one storm event. The inability of the regression model to predict ENT(MF) levels for individual samples is likely due to the different sources of ENT impacting the beach at any given time, making it particularly difficult to to predict short-term variability of ENT(MF) for environmental parameters.     

Structure and energy of thin films of poly-(1,4-cis-butadiene): A new atomistic approach

Summary In this work we study the formation of a thin film in vacuum by collapsing a random parent chain under two-dimensional boundary conditions. The initial random parent chain is obtained from atomistic simulation of bulk amorphous poly-(1,4-cis-butadiene). Films with a thickness of 25 Å are obtained for parent chains with 100 monomers. The density drops off sigmoidally over a distance of 5 Å near the free surfaces, while in the interior bulk density is obtained. The backbone bonds are randomly oriented in the interior and sharply oriented along the film plane near the free surfaces; the onset of order corresponds roughly with the drop in the mass density from its bulk value. The trans state of the CH₂ -CH₂ bond is also enriched compared to the bulk, in order for the chain to track the plane of the film more effectively. The difference in the energy of a chain in the amorphous bulk (3D periodic) and in the thin film (2D periodic) allows us to calculate the internal energy contribution to the surface energy; the agreement with the experimental value is reasonable.     

Space charge accumulation in power cable XLPE insulation

The accumulation of space charge in the crosslinked polyethylene (XLPE) insulation of a power cable sample under dc stress was investigated. The sample was held at 82°C and atmospheric pressure, and at 82°C and 0.1 Pa, for periods up to several days. Such conditioning removed pre-existing space charge, When an external dc field was applied after conditioning at atmospheric pressure and 82°C, space charge accumulated at a rate considerably faster than that observed before conditioning. However the rate of accumulation following conditioning at 82°C under reduced pressure was much slower than that observed before conditioning. The faster rate could be recovered by reconditioning the sample at atmospheric pressure after conditioning under reduced pressure. Inversion of the equilibrium space charge profile, following reversal of the applied field, was observed. This observation is consistent with a model incorporating a spatially-inhomogeneous polarization in the amorphous volume of the XLPE, and electron injection/extraction at the electrodes. The electron transfer between electrode and XLPE in either direction involves the same narrow window of combined donor and acceptor states in the insulator, centered on the Fermi level. The spatially-inhomogeneous polarization in the XLPE originates in a spatially-inhomogeneous distribution of dipole complexes. It is suggested that the dipoles are formed by a process equivalent to nonpermanent oxidation of the XLPE, requiring water as a catalyst     

A National Cancer Data Base report on 53,856 cases of thyroid carcinoma treated in the U.S., 1985-1995 [see commetns

BACKGROUND: The National Cancer Data Base (NCDB) represents a national electronic registry system now capturing nearly 60% of incident cancers in the U. S. In combination with other Commission on Cancer programs, the NCDB offers a working example of voluntary, accurate, cost-effective "outcomes management" on a both a local and national scale. In addition, it is of particular value in capturing clinical information concerning rare cancers, such as those of the thyroid. METHODS: For the accession years 1985-1995, NCDB captured demographic, patterns-of-care, stage, treatment, and outcome information for a convenience sample of 53,856 thyroid carcinoma cases (1% of total NCDB cases). This article focuses on overall 10-year relative survival and American Joint Committee on Cancer (AJCC) (3rd/4th edition) stage-stratified 5-year relative survival for each histologic type of thyroid carcinoma. Care patterns also are discussed. RESULTS: The 10-year overall relative survival rates for U. S. patients with papillary, follicular, Hürthle cell, medullary, and undifferentiated/anaplastic carcinoma was 93%, 85%, 76%, 75%, and 14%, respectively. For papillary and follicular neoplasms, current AJCC staging failed to discriminate between patients with Stage I and II disease at 5 years. Total thyroidectomy +/- lymph node sampling/dissection represented the dominant method of surgical treatment rendered to patients with papillary and follicular neoplasms. Approximately 38% of such patients receive adjuvant iodine-131 ablation/therapy. At 5 years, variation in surgical treatment (i.e., lobectomy vs. more extensive surgery) failed to translate into compelling differences in survival for any subgroup with papillary or follicular carcinoma, but longer follow-up is required to evaluate this. NCDB data appeared to validate the AMES prognostic system, as applied to papillary cases. Younger age appeared to influence prognosis favorably for all thyroid neoplasms, including medullary and undifferentiated/anaplastic carcinoma. NCDB data also revealed that unusual patients diagnosed with undifferentiated/anaplastic carcinoma before age of 45 years have better survival. CONCLUSIONS: The NCDB system permits analysis of care patterns and survival for large numbers of contemporaneous U. S. patients with relatively rare neoplasms, such as thyroid carcinoma. In this context, it represents an unsurpassed clinical tool for analyzing care, evaluating prognostic models, generating new hypotheses, and overcoming the volume-related drawbacks inherent in the study of such neoplasms. [See editorial on pages 2434-6, this issue.]     

Mechanisms of normal and abnormal neurulation: evidence from embryo culture studies

In this paper we estimate the size of several categories of "Israeli" immigrants in the United States. According to the 1990 U.S. census, there were about 95,000 Israeli-born immigrants in the United States in that year. Using the language and ancestry information available in the Public Use Microdata Sample (PUMS) of the 1990 census, we estimate that of this total, about 80,000 are Jews and 15,000 are Palestinian Arabs born in Israel. In addition to the Israeli-born, we present a range for the number of Jewish immigrants from Israel who are not Israeli-born (about 30,000-56,000). Thus our estimate for the total number of Jewish immigrants from Israel in the United States in 1990 is between 110,000 and 135,000. Fertility information available in the PUMS, also enable us to provide estimates for the number of second-generation Israelis in the United States in the 1990 (about 42,000). Finally, using both the 1980 and 1990 PUMS, we provide estimates for the rate of return migration among Israeli-born Jewish immigrants in the United States.     

Effects on print quality of varying acrylic binder types in water-based flexographic ink formulations

The ink industry is one of the world's largest markets due to the increasing demand for printing inks for the packaging industry. Flexography printing is a well-known promising technology for large-area printing due to its high printing speed and roll-to-roll capability to print economically on a variety of surfaces and is used in nearly in all areas of packaging printing. Water-based inks are considered non-toxic, odourless, and more environmentally friendly options compared to solvent-based inks. Therefore, in this article, the goal was to develop new water-based ink formulation with different acrylic binders for flexographic printing on commercial solid bleached sulphate (SBS) board. Five inks were formulated with four different acrylic binders and compared to a commercially available ink to study their performance. The developed inks were investigated with regard to their print qualities and print characteristics. It was found that the binder type influenced some print quality while the effect was not significant for others. Using flexography printed cyan inks, the ink formulated with the highest molecular weight had the lowest print density and the largest tonal value increase (TVI) observed between 40 and 60 tone values. The same ink had the largest mottle values and variation in topography. For values of print contrast and delta gloss at 75°, although differences were observed between average values, data had inconclusive variation and spread around averages, where no conclusive trends or effects of acrylic binder type on these response factors were observed. Print chroma and dot roundness results were equally close for all printed samples.     

Usability of cellulose-based binder in water-based flexographic ink

Packaging must have a good commercial appearance and is generally obtained by ink transferred to its substrate. It is important that the ink used in packaging printing is produced from environmentally friendly and sustainable raw materials as well as being suitable for the printing system. The increasing demand in the field of printed packaging and the scarcity of resources to meet this demand have accelerated the search for new sources for inks. For this purpose, inks produced in the laboratory using a modified cellulose-based binder, a commercial acrylic resin and a commercial soybean protein were compared with a commercial ink. As a result of the study, it was determined that the printability properties of the ink obtained by using the modified cellulose-based binder were better than the ink obtained with commercial soybean protein. It was determined that it showed printability properties close to the ink produced with commercial acrylic binders. By using modified cellulose-based water-based flexographic ink instead of other commonly used binders, more environmentally friendly sustainable inks can be produced.