Reduction of DC-bus capacitor ripple current with PAM/PWM converter

Electrolytic capacitors are used in nearly all adjustable-speed drives, and they are one of the components most prone to failure. The main failure mechanisms include loss of electrolyte through outgassing and chemical changes to the electrolyte and oxide layer. All the degradation mechanisms are exacerbated by ripple current heating. Since the equivalent series resistance of electrolytic capacitors is a very strong function of frequency it must be properly modeled to accurately calculate the power loss. In this paper, a method to reduce the ripple current in a constant Volts/Hertz pulse-amplitude-modulation (PAM)/pulsewidth-modulation (PWM) converter driving an induction motor is investigated. The dc-bus voltage amplitude is reduced in proportion to speed by a buck or current stiff rectifier and the PWM modulation index is maintained at a high level to achieve a reduced ripple current below base speed. By comparison with a diode-bridge-fed PWM voltage stiff inverter, it is shown that the PAM/PWM mode of operation can lead to a significant reduction in capacitor power loss leading to increased capacitor lifetime or decreased capacitor size. The capacitor heating is analyzed using numerical and analytical techniques. Experimental results are provided to verify the analytical results.     

Incorporation of polyfluorenes into poly(lactic acid) films for sensor and optoelectronics applications

Films of neat and plasticized biodegradable poly(lactic acid) (PLA) matrices containing anionic conjugated polyelectrolytes, poly[9,9‐bis(4‐phenoxybutylsulfonate)]fluorene‐2,7‐diyl‐alt‐arylenes, with 1,4‐phenylene and 4,4″‐p‐terphenylene, respectively, as arylene groups or a neutral poly(9,9‐dialkylfluorene) for comparison were prepared by solution casting. These films were characterized using differential scanning calorimetry, thermogravimetry, scanning electron microscopy and fluorescence spectroscopy. In addition, the effects of plasticizer on the thermal properties and the oxygen permeability of the PLA films were measured through the oxygen transmission rate. Results show that it is possible to obtain thin, optically transparent and luminescent films with potential in oxygen sensing, exhibiting good thermal and photochemical stability. At high polyelectrolyte content, evidence is found for phase separation and aggregate formation and it is no longer possible to obtain completely homogeneous films. The possibility of incorporating the cationic metal complex tris(2,2′‐bipyridyl)ruthenium(II) into plasticized PLA films containing conjugated polyelectrolytes for dual‐wavelength ratiometric luminescence sensing is also discussed. Copyright © 2012 Society of Chemical Industry     

Diamine oxidase supplementation improves symptoms in patients with histamine intolerance

Food Science and Biotechnology - Histamine intolerance (HIT) is thought to be caused by a disproportionate amount of histamine in the body. The enzyme diamine oxidase (DAO) is considered for the...     

Role of salt on adhesion of an epoxy/aluminum (oxide) interface in aqueous environments

Joints held by polymeric adhesives are commonplace in many engineered products, but normal service can require exposure to environmental conditions that present a significant challenge for maintaining the structural integrity of the interface. In particular, aqueous environments can wreak havoc on the joint strength. Here, a mechanistic approach is used to understand the difference in the debonding behavior of an epoxy/aluminum (oxide) interface when exposed to deionized (DI) water and aqueous sodium chloride by correlating macroscopic failure with the sorption of salt and water into the adhesive and its nanoscale distribution. For the epoxy‐aluminum system examined here, the presence of sodium chloride increases the resistance to crack growth in comparison to DI water. The debonding appears to be controlled by water near the buried interface. Salt water decreases the solubility of water in the epoxy and decreases the concentration of water near the buried interface, but the concentration of salt that enters the epoxy is below the detection limit. Thus, even if ions cannot penetrate or sorb into the adhesive, the presence of salt can significantly alter the water distribution within the adhesive and ultimately the strength of the joint. POLYM. ENG. SCI., 56:18–26, 2016. © 2015 Society of Plastics Engineers     

Polyester composite water uptake and organic contaminant release affected by carbon nanofiber reinforcements

The incorporation of carbon nanofiber (CNF) into glass fiber (GF) composites is a potential route to extend polymer composite service‐life and enhance mechanical properties. Under nonstatic conditions, only limited information concerning water uptake and contaminant release properties of nanocomposite materials is currently available. Polyester composites containing GF and oxidized CNF were immersed in water for 30 days under nominal pressure at 23 °C, below the polymer's glass‐transition temperature. Water was analyzed and changed every three days to simulate water chemistry regeneration similar to exposures in flowing systems. Composites with oxidized CNF had greater water sorption capacity and leaching rates than CNF‐free composites. The total mass of organic contaminant released correlated with the amount of water sorbed by each composite (r² = 0.91), although CNF dispersion was found to vary greatly within composites. The greatest and least contaminant release rates were found for the polyester‐CNF and the polyester‐GF composites, respectively. While volatile aromatic resin solvents and stabilizer compounds were detected, their concentrations declined over the 30 day exposure period. We hypothesize that the hydrophilic nature of the oxidized CNF increased the water sorption capacity of the polyester composites. Additional studies are warranted that examine the impact of this phenomenon on composite mechanical and long‐term durability properties. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43724.     

Effects of lauric and myristic acids on ruminal fermentation, production, and milk fatty acid composition in lactating dairy cows

The objectives of this experiment were to investigate the effects of lauric (LA) and myristic (MA) acids on ruminal fermentation, production, and milk fatty acid (FA) profile in lactating dairy cows and to identify the FA responsible for the methanogen-suppressing effect of coconut oil. The experiment was conducted as a replicated 3 × 3 Latin square. Six ruminally cannulated cows (95 ± 26.4 DIM) were subjected to the following treatments: 240 g/cow per day each of stearic acid (SA, control), LA, or MA. Experimental periods were 28 d and cows were refaunated between periods. Lauric acid reduced protozoal counts in the rumen by 96%, as well as acetate, total VFA, and microbial N outflow from the rumen, compared with SA and MA. Ruminal methane production was not affected by treatment. Dry matter intake was reduced 35% by LA compared with SA and MA, which resulted in decreased milk yield. Milk fat content also was depressed by LA compared with SA and MA. Treatment had no effect on milk protein content. All treatments increased milk concentration of the respective treatment FA. Concentration of C12:0 was more than doubled by LA, and C14:0 was increased (45%) by MA compared with SA. Concentration of milk FA < C16 was 20% lower for LA than MA. Concentrations of trans 18:1 FA (except trans 12) and CLA isomers were increased by LA compared with SA and MA. Overall, the concentrations of saturated FA in milk fat were reduced, and that of > C16 FA and MUFA were increased, by LA compared with the other treatments. In this study, LA had profound effects on ruminal fermentation, mediated through inhibited microbial populations, and decreased DMI, milk yield, and milk fat content. Despite the significant decrease in protozoal counts, however, LA had no effect on ruminal methane production. Thus, the antimethanogenic effect of coconut oil, observed in related studies, is likely due to total FA application level, the additive effect of LA and MA, or a combination of both. Both LA and MA modified milk FA profile significantly.     

Low band gap copolymer containing naphthalene-1,4,5,8-tetracarboxylic bisimide: Synthesis,properties and organic solar cell applications

A new alternating donor–acceptor copolymer, poly{[2,7-(9,9′-dioctylfluorene)-alt-5,5′-(bis(2,2′-thiophene)-4,7-(2,1,3-benzothiadiazole)]-co-[2,7-(9,9′-dioctylfluorene)-alt-5,5′-(bis(2,2′-thiophene)-2,6-naphthalene-1,4,5,8-tetracarboxylic-N,N′-di(2-ethylhexyl)imide]} (PFTBTN), was synthesized for the use of photovoltaic cells. The copolymer containing fluorene, as the donor segment and naphthalene bisimide, dithienylbenzothiadiazole, as the acceptor segment was polymerized via Suzuki couplings to achieve a polymer with a narrow band gap. The band gap values of the copolymer film determined from optical and electrochemical measurements were 1.69 and 2.06 eV, respectively. The optical absorption spectrum revealed two broad bands in the range of 300–750 nm. Electrochemical studies indicate sufficiently deep HOMO/LUMO levels that enable a high open-circuit voltage when fullerene derivative ([6,6]-phenyl-C₆₁ butyric acid methyl ester) was used as an electron acceptor. Bulk heterojunction photovoltaic cells were fabricated in the device configuration of ITO/PEDOT:PSS/PFTBTN:PCBM/TiO_x/Al. Open-circuit voltage reached 0.74 V with the maximum energy conversion efficiency of 0.40% under the illumination of AM 1.5 (100 mW/cm²).     

Adolescent male rats exposed to social defeat exhibit altered anxiety behavior and limbic monoamines as adults.

Social stress in adolescence is correlated with emergence of psychopathologies during early adulthood. In this study, the authors investigated the impact of social defeat stress during mid-adolescence on adult male brain and behavior. Adolescent male Sprague–Dawley rats were exposed to repeated social defeat for 5 days while controls were placed in a novel empty cage. When exposed to defeat-associated cues as adults, previously defeated rats showed increased risk assessment and behavioral inhibition, demonstrating long-term memory for the defeat context. However, previously defeated rats exhibited increased locomotion in both elevated plus-maze and open field tests, suggesting heightened novelty-induced behavior. Adolescent defeat also affected adult monoamine levels in stress-responsive limbic regions, causing decreased medial prefrontal cortex dopamine, increased norepinephrine and serotonin in the ventral dentate gyrus, and decreased norepinephrine in the dorsal raphe. Our results suggest that adolescent social defeat produces both deficits in anxiety responses and altered monoaminergic function in adulthood. This model offers potential for identifying specific mechanisms induced by severe adolescent social stress that may contribute to increased adult male vulnerability to psychopathology. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Remote Sensing and its application to urban studies

Abstract

Remote Sensing, in the form of air photographs, has been used in urban analysis since the nineteenth century. This paper chronicles some of its contributions from then until the present day and introduces the reader to the current and future high resolution spaceborne systems that will increasingly provide information to the urban analyst. Resolution requirements are examined and potential applications of the data are proposed.     

1,4-Cyclohexanecarboxylates: potent and selective inhibitors of phosophodiesterase 4 for the treatment of asthma

Evaluation of a variety of PDE4 inhibitors in a series of cellular and in vivo assays suggested a strategy to improve the therapeutic index of PDE4 inhibitors by increasing their selectivity for the ability to inhibit PDE4 catalytic activity versus the ability to compete for high affinity [3H]rolipram-binding sites in the central nervous system. Use of this strategy led ultimately to the identification of cis-4-cyano-4-[3-(cyclopentyloxy)-4-methoxyphenyl]cyclohexane-1-carboxyl ic acid (1, SB 207499, Ariflo), a potent second-generation inhibitor of PDE4 with a decreased potential for side effects versus the archetypic first generation inhibitor, (R)-rolipram.