Engineering microfluidic papers: effect of fiber source and paper sheet properties on capillary-driven fluid flow

In the present study, we introduce a novel approach to control and modulate fluid transport inside microfluidic papers using lab-engineered paper sheets. Lab-sheets consisting of different fiber sources (eucalyptus sulfate and cotton linters pulp) and varying porosities were designed and further modified with small millimeter-scaled channels using hydrophobic barriers consisting of fiber-attached, hydrophobic polymers. The capillary-driven transport of an aqueous solution was monitored visually, and the influence of parameters such as fiber source, paper grammage, and channel width on the flow rates through the channel was investigated. The experimental results were compared with those obtained with commercially available filter papers. Our findings suggest that accurate control of fluid transport processes with standard filter papers is complex. Additionally, if the channel width is smaller than the mean fiber length, flow rates become dependent on the geometric parameters of the channel because of the formation of dead-end pores at the hydrophobic barriers. Finally, control of the paper sheets porosity, by varying the fiber density of the lab-made paper, affords the fabrication of chemically identical sheets whereby capillary flow is largely influenced and can be modulated accordingly by simple papermaking processes.     

The determination of molecular weights of polymers from critical concentrations of ternary systems polymer-polymer-solvent

The dependence of the critical concentration of the ternary system polymer-polymer-solvent on the molecular weight can be expressed by the relation where c_c is the critical concentration, M? the appropriate average of the molecular weight of both polymers; A and c_c∞ are constants for the given system. The possibility of determining the molecular weight of one of the polymers from the value c_c and the molecular weight of the known polymer with the aid of equation (1) is discussed.     

The longitudinal impact of enterprise system users’ pre-adoption expectations and organizational support on post-adoption proficient usage

Although enterprise systems (ES) are ubiquitous, many firms report less than stellar payoffs from these costly investments, with underutilization often attributed to failures in the implementation process. Unfortunately, research has not provided sufficient insights into these failures, in part because it has focused on actual usage, as opposed to proficient usage, as the benchmark for successful implementation. Moreover, research has not generally examined how the adoption process unfolds over time, thus overlooking potential underlying mechanisms that may help explain how adopters achieve proficiency. To begin addressing these shortcomings, we study how adopters’ pre-adoption expectations, enacted over time, can influence their post-adoption proficiency, by shaping how and why they spend time using the system during the adoption period. We analyzed time-lagged survey data from 153 financial analysts, required to adopt new ES-based software, at a multinational bank. We found that adopters who hold pre-adoption expectations reflecting greater internal and external motives to adopt the system as well as systematically integrate it into their work routines are more apt to use the system in ways that enhance their cumulative knowledge of it, and subsequently develop higher levels of proficiency post-adoption. Moreover, greater organizational support enhanced the impact of adopters’ expectations on proficiency, except when their actual use is low in which case organizational support had an adverse effect.     

The Kinetics of the Thermal Decomposition of Thermoplastic Polyurethane Elastomers under Thermoplastic Processing Conditions

A theoretical approach to the kinetics of the thermal decomposition of molten thermoplastic polyurethane elastomers, under conditions of thermoplastic processing, is described. On the basis of these considerations, the thermal decomposition in different instruments (melt index analyser and measuring extruder) can be described quantitatively and the various results can be compared. As a result, identical conditions of decomposition of the melt can be defined accurately, thus opening up the possibility of combining experimental values from different instruments. The fundamental kinetic equation obtained for the kinetics of the thermal decomposition of thermoplastic polyurethanes describes the decomposition reaction and the reverse reaction (formation reaction) – which is dependent on the system of measurement and processing – as a function of the molar mass (end‐group concentration) of the original product, determined from the velocity constants for the decomposition reaction and back reaction. The consideration of the limiting value for t → ∞ is in agreement with the equilibrium constant. Consequently, the development of physical characteristic functions of thermoplastic polyurethane elastomers – independent of the system of measurement – is possible.

Experimental values and calculated curves for the thermal decomposition of PUR‐Et in a melt index analyser.     

Produktionsintegrierter Umweltschutz – Verwertung von Reststoffen

Production-integrated environmental protection – Utilization of residues . Chemical plants as well as coal-fired powerstations utilize chemical reactions in order to produce materials or energy. Most of these reactions additionally produce gaseous, liquid, or solid residues. It is the main objective of production-integrated environmental protection to use these residues as suitable feedstocks in order to reduce environmental pollution and lower the consumption of raw materials. Several examples from the BASF Group will show how, by crossing the borders of the respective plant, reasonable solutions for material, or at least energetic, utilization of residues can be achieved. As a result of permanent efforts in production-integrated environmental protection over many years and despite increasing outputs the emissions of the chemical industry have been continuously reduced.     

Detailed Molecular Structure Modeling – A Path Forward to Designing Application Properties of ldPE

Summary: This paper describes a step on the ambitious aim to “design” application properties of ldPE by first simulating the detailed molecular structure of a high‐pressure tubular reactor product. The reactor of a certain configuration produces under well‐defined operating conditions. The next step is to correlate the structure with the application properties. Finally, the sequence will be reversed in order to deduce the operating conditions, which lead to the desired product quality. Two‐dimensional distributions, in molecular weight and branching frequency, as well a two compartment models with a core and a shell stream were simulated and compared with experimental results. Therefore, CFD simulations were carried out to discretize the reaction medium. Samples were taken from both pilot and commercial plants. The TREF‐SEC analytical method was successfully applied in order to measure the microscopic structure of the material. The tremendous numerical problems were solved with the help of the software PREDICI .

Detailed MWD for a pilot scale reactor product.     

A Unified Model for the Mixing of Non‐Newtonian Fluids in the Laminar,Transition, and Turbulent Region

Summary: Non‐Newtonian fluid behavior has significant influence on quantities in chemical engineering like power input, mixing time, heat transfer etc. In the laminar flow region, the concept of effective viscosity by Metzner and Otto is well established. In the transition region between laminar and turbulent flow, the existing concepts use three and even more empirical parameters to determine the specific power input. Here, a unified and general but simple approach is introduced to calculate the power input for shear thinning fluids over the whole flow region using just one empirical parameter. The Metzner‐Otto relation is obtained as a limiting case for the laminar region. The empirical parameter of the new approach is related to the Metzner‐Otto constant. The concept is validated for eight different stirrer systems. Mixing time and maximum shear rate and heat transfer can also be calculated using this approach. The new concept presented should also be applicable for other apparatuses, e.g., static mixers.

Comparison of experimental data and a curve calculated according to the new method (solid line).     

Thermolysis of the polyyne C8H2 in hexane and methanol: Experimental and theoretical study

The mean lifetimes of polyyne C₈H₂ in hexane were determined at 50, 60, 80, and 100 °C and in methanol at 60 °C. The reactions are second order at all temperatures: ln k₂ = 20.5 ± 1.5-10303 ± 520T⁻¹ and the corresponding activation energy is 85.7 ± 6.3 kJ mol⁻¹ (7164 cm⁻¹). Extrapolation suggests that solutions at 1 mM concentration are significantly unstable at room temperature. Quantum chemical calculations show that polyynes C_mH₂ + C_nH₂ (m + n = 16) could be products, but these were not detected. Alternatively, C₁₆H₂ isomers could form. IR spectra of the solid residues from hexane and methanol solutions were obtained.     

Disposition and fate of cucurbitacin B in five species of diabroticites

Five species of diabroticites with different host-plant preferences produced an essentially identical array of metabolites when fed radiolabeled cucurbitacin B synthesized in vivo and purified fromCucurbita maxima Duchesne seedlings. All species excreted the bulk of the cucurbitacin (67,17-94.59% total dpm), permanently sequestered a small proportion of a cucurbitacin conjugate in the hemolymph (0.98–2.76%), and apportioned the remainder between the gut, the body, and the eggs (when present). Markedly different ratios between the excretory metabolites (i.e., polar vs. unmetabolized cuc) suggest thatDibrotica virgifera virgifera, a grass specialist, andAcalymma vittatum, a cucurbit specialist, have lower rates of metabolic alteration than the polyphagousD. undecimpunctata howardi, D. balteata, andD. cristata, which is associated with relict prairies. Mean life-spans ofD. balteata and D. v. virgifera and maleA. vittatum decreased significantly with continuous feeding onCucurbita fruit containing cucurbitacins (vs. fruit devoid of cucs). The longevity of femaleA. vittatum, however, was unaffected by the presence of cucurbitacins.