RESERVOIR PROPERTIES OF BARREMIAN – APTIAN URGONIAN LIMESTONES,SE FRANCE,PART 1: INFLUENCE OF STRUCTURAL HISTORY ON POROSITY-PERMEABILITY VARIATIONS

Upper Barremian – Lower Aptian inner platform “Urgonian” limestones in the Mont de Vaucluse region, SE France, consist of alternating metre-scale microporous and tight intervals. This paper focuses on the influence of structural deformation on the reservoir properties of the Urgonian limestone succession in a study area near the town of Rustrel. Petrographic, petrophysical and structural data were recovered from five fully-cored boreholes, from the walls of a 100 m long underground tunnel, and from a 50 m long transect at a nearby outcrop. The data allowed reservoir property variations in the Urgonian limestones to be studied from core to reservoir scale. Eleven Reservoir Rock Types (RRTs) were identified based on petrographic features (texture, grain size), reservoir properties (porosity, permeability), and the frequency of structural discontinuities such as fractures, faults and stylolites. Tight and microporous reservoir rock types were distinguished. Tight reservoir rock types were characterised by early cementation of intergranular pore spaces and by the presence of frequent structural discontinuities. By contrast microporous reservoir rock types contained preserved intragranular microporosity and matrix permeability, but had very few structural discontinuities. Observed vertical alternations of microporous and tight rock types are interpreted to have been controlled by the early diagenesis of the Urgonian carbonates. Deformation associated with regional-scale tectonic phases, including Albian – Cenomanian “Durancian” uplift (∼105 to 96 Ma) and Pyrenean compression (∼55 to 25 Ma), resulted in the modification of the initial petrophysical properties of the Urgonian limestones. An early diagenetic imprint conditioned both the intensity of structural deformations and the associated circulations of diagenetic and meteoric fluids. Evolution of the Reservoir Rock Types is therefore linked both to the depositional conditions and to subsequent phases of structural deformation.     

Synthesis and physicochemical characteristics of polymolybdenum(VI) phenylsiloxanes by means of different methods

Interaction of molybdenyl(VI) bis(acetylacetonate) with polyphenylsiloxane in xylene and under mechanochemical activation conditions has been investigated. The interaction in solution proceeds with splitting of the siloxane bond and formation of polymolybdenum(VI) phenylsiloxane with different silicon/metal ratios. The fractions with the silicon/metal ratio < 2 are characterized with high degree of crystallinity and low solubility, whereas those with the ratio > 2 are amorphous. The interaction of the above reagents under mechanical activation conditions proceeds with the formation of soluble polymers similar to those obtained in a solution with the silicon/molybdenum ratio equal to 2.6. The crystal chemistry parameters of the fraction obtained in solution with the ratio Si/Mo equals to 1:2 have been calculated on the basis of the X-ray diffraction analysis data using the Debye–Shearer equation. It has been demonstrated that the chain cross section found using the Miller–Boyer method coincides with that calculated geometrically on the basis of literature data on bond lengths and angles. It is shown that the interaction of molybdenyl(VI) bis(acetylacetonate) with polyphenylsiloxane takes place in solution more deeply than under the conditions of mechanochemical activation and is accompanied by the process of separation siloxanes connection. This leads to the formation of a fraction with smaller ratio of substances than the initial ratio.