Processabilities and mechanical properties of surlyn-treated starch/LDPE blends

The esterification of the hydroxyl group of starch with DuPont Surlyn was considered as pretreatment method of starch before blending with polyolefins. In treating starch with Surlyn, two different raction conditions were taken to optimize reaction conditions. First, the esterification reaction was carried out in 110°C xylene with oleic acid as a catalyst. Second, the reaction out in a 90°C mixture of deionized water and xylene with ceric ammonium nitrate(CAN) as an initiator. Starch granules would be swollen above the gelatinization temperature in water. In both cases starch was midified by Surlyn to have good compatibility with low-density polyethylene (LDPE). The mechanical and theological properties were examined for blends of the treated starch and LDPE. This system may be one of the biodegradable polymer blends that sufficiently retain properties as a packaging film.     

Ozonolysis of cyclododecene

Ozonolysis of cyclododecene was carried out to produce an w-formyl carboxylic acid (12-oxododecanoic acid) which is derived from zwitterion and aldehyde moiety that are formed during the reaction. The ozonolysis was performed to examine the product distribution under such reaction variables as temperature, kinds of solvent, and presence of catalyst. The yield of polymeric ozonide, which is undesirable product, was measured to be dominantly 86% without pyridine catalyst, whereas, only 10.25% with the catalyst. The optimum reaction condition was to be in MC (methylene chloride) solvent, and in the presence of equimolar olefin and pyridine catalyst at O°C, at which the yields of polymeric ozonide, 1,12-dodecanedialdehyde, 1,12-dodecanedicarboxylic acid, and 12-oxo-dodecanoic acid were 10.25%, 26.72%, 26.31%, and 36.72%, respectively.     

New phenothiazine-containing monomers and polymers

Summary Three new phenothiazine-containing electrono-donor monomers: methacryloyl-2-hydroxyethyl-2-(N-phenothiazinyl)propionate (i) acryloyl-2-hydroxyethyl-2-(N-phenothiazinyl) propionate (ii) and 2-(N-phenothiazinyl) propionic acid vinyl ester (iii) were synthesized and radically polymerized. The ionization potentials of poly(i), poly(iii) and of the model for the structural unit of the acrylic polymers: acetyl-2-hydroxyethyl-2-(N-phenothiazinyl) propionate determined with two small acceptors were discussed in terms of sterical hindrances.     

金属铝诱导法低温制备多晶硅薄膜

以氢气稀释的硅烷（SiH4）和硼烷（B2H6）为气源,利用等离子体增强化学气相沉积法（PECVD）制备出p型a-Si薄膜.采用铝诱导晶化技术对不同厚度的铝膜对a-Si薄膜晶化的影响进行了研究.实验中发现,铝膜溅射为10 s的非晶硅薄膜样品在450℃下退火10 min后,p型a-Si结构仍为非晶态,铝膜溅射为20 s的非晶硅薄膜在450℃下退火20 min后,p型a-Si薄膜开始晶化为polySi薄膜,并且铝膜厚度越厚,则a-Si薄膜晶化程度越强.     

Effects of soaking soybeans in dilute acids on biologically active components

Soaking soybeans in dilute acids affected activities of lipoxygenase, trypsin inhibitor and urease. Effects of soaking time, acid concentration and soaking temperature were investigated. Lipoxygenase activity was completely eliminated by soaking in 0.3 M HC1 at either 23°C or 40°C for 8 hr. Less than 50% trypsin inhibitor remained and urease was inactivated to an acceptable level (0.04 ΔpH).     

A fully autonomous kernel-based online learning neural network model and its application to building cooling load prediction

Building cooling load prediction is critical to the success of energy-saving measures. While many of the computational models currently available in the industry have been developed for this purpose, most require extensive computer resources and involve lengthy computational processes. Artificial neural networks (ANNs) have recently been adopted for prediction, and pioneering works have confirmed the feasibility of this approach. However, users are required to predetermine an ANN model’s parameters. This hinders the applicability of the ANN approach in actual engineering problems, as most engineers may be unfamiliar with soft computing. This paper proposes a fully autonomous kernel-based neural network (AKNN) model for noisy data regression prediction. No part of the model’s mechanism requires human intervention; rather, it self-organises its structure according to the training samples presented. Unlike the other existing autonomous models, the AKNN model is an online learning model. It is particularly suitable for online steps-ahead prediction. In this paper, we benchmark the AKNN model’s performance according to other ANN models. It is also successfully applied to predicting the cooling load of a commercial building in Hong Kong. The occupancy areas and concentration of carbon dioxide inside the building are successfully adopted to mimic the building’s internal cooling load. Training data was adopted from actual measurements taken inside the building. Its results show reasonable agreement with actual cooling loads.     

Conceptual and basic designs of the Mobile Harbor crane based on topology and shape optimization

The Mobile Harbor (MH) has been recently proposed as a novel maritime cargo transfer system that can move to a container ship anchored in the deep sea and handle containers directly at sea with the aid of a stabilized MH crane. Because this system operates under at-sea conditions, the MH crane must be designed to support an inertia load and wind force, as well as its self-weight. The wave-induced motions of the MH, e.g. rolling, pitching, and heaving, generate a significant amount of inertia load, which has not been considered in the design of conventional quayside cranes installed on stable ground. Wind force is also a critical design factor due to the higher wind velocity in the open sea. In addition to the aforementioned structural rigidity, mass minimization is also important in the structural design of MH cranes because it reduces the overturning moment and therefore enhances ship stability. In this paper, the sensitivities of the design-dependent loads (i.e. self-weight, inertia load, and wind force) are derived with respect to the design variables, and then a topology optimization is conducted with the derived sensitivities in order to obtain a conceptual design. Then, the conceptual design is elaborated into a three-dimensional basic design through shape optimization with design regulations for offshore cranes. Through the integrated design process with the topology and shape optimizations, a conceptual and basic design is successfully obtained for the MH crane.     

Surface modification of polyethersulfone hollow-fiber membranes by γ-ray irradiation

The fouling of ultrafiltration membrane is often caused by gel formation on the membrane surface. This gel layer arises due to concentration polarization or macromolecular adsorption on the membrane surface. The gel layer affects both the hydraulic permeability and the rejection properties of the membrane. In this report, the adsorption of porcine albumin and the concentration polarization effect on modified and unmodified polyethersulfone (PES) hollow-fiber membrane is studied. PES ultrafiltration hollow-fiber membranes were modified by the grafting of polyethylene glycol (PEG) polymer on the internal surface using γ-ray irradiation method. The modified hollow fibers were less susceptible to fouling than were the unmodified fiber. The performance of both modified and unmodified hollow fibers was tested as a function of feed flow rates and protein concentrations. © 1994 John Wiley & Sons, Inc.     

无线环境下基于多流优先级的并行多路传输

在无线异构网络环境下提出一种基于多流优先级的并行多路传输方案。该方案基于并行多路传输协议CMT-SCTP,并利用了SCTP的多流特性和部分可靠特性。针对数据的重要性和时间敏感度,设计优先级数据调度算法;同时提出基于路径质量的数据分发机制,进一步保证数据的有效传输。在NS-2中的仿真结果表明,该方案能够有效提高数据传输的吞吐量,减少时延,保证较好的数据传输性能。     

Degradation of a textile azo dye by pulsed arc discharge to the surface of wastewater

The pulsed arc discharge to the surface of wastewater was applied to the degradation of a textile azo dye (Acid Red 27). A high-voltage electrode (discharging electrode) was vertically placed above the surface of the wastewater while the wastewater itself was grounded. The pulsed arc discharge occurred between the tip of the discharging electrode and the surface of the wastewater, producing various oxidative species. Oxygen was used as the working gas instead of air to prevent nitrogen oxides from forming. The effect of several parameters on the chromaticity and chemical oxygen demand (COD) removal was examined. The results obtained showed that the chromaticity of the wastewater was completely removed by this process and the COD also decreased significantly. It has been found that ozone formed in the gas phase mainly affects the removal of the dye. The contribution of other effects such as ultraviolet light emission and OH radical formation during the arc discharge to the degradation of the dye was found to be less than 15%. For the present reactor system, the optimum pH, pulse repetition rate and agitation speed were found to be 3.0, 110 Hz and 300 rpm, respectively.