Enhancement of heat and mass transfer in a plane channel with turbulizers on one of the walls

The effect of turbulizing asperities positioned on one of the walls of a plane channel on the intensity of exchange processes near a smooth wall with injection of different working media is studied experimentally. Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 70, No. 3, pp. 404–408, 1997.     

Fault section detection system for 66 kV underground branchtransmission lines using optical magnetic field sensors

A fault section detection system that uses optical magnetic field sensors and instantly detects the section in which a ground fault occurred was developed for 66 kV underground multiterminal systems having Y-branch joint boxes. The optical magnetic field sensor, which is based on the Faraday effect in Bi-doped YIG ((BiYbGd)₃Fe₅O₁₂) having a large Verdet constant, detects cable conductor currents of 0 to 2000 A with high precision with the use of a laminated magnetic ring core of silicon steel plates. Sensors and a fault section detector/indicator of a system are connected with optical fibers capable of nonrepeated transmission of over 6 km     

Bovine petechial fever (Ondiri disease)

This paper describes an efficient computer method for generating three-dimensional (3-D) ultrasonic speckle patterns for sector scans of an annular array with dynamic focusing in both transmit and receive. Assuming random scatterers in an attenuating medium, the system synthesizes the waveform for each scan line using echo data received at all annular elements of the transducer when short pulses are transmitted by one annulus after another. The amount of echo data needed to synthesize one waveform is tremendously reduced by reducing the 3-D distributions of scatterers to line distributions and by representing scatterers on a small line segment by a single equivalent scatterer taking into account the two-way travel time differences. Furthermore, by a judicious 3-D arrangement of the scatterer lines and scan lines, it is possible to synthesize the waveform for a new scan line with negligible computation overhead. The waveforms of the scan lines are detected to obtain a B-mode image or speckle patterns. The patterns obtained on several differently-oriented image planes showed a good statistical agreement with experimentally obtained patterns.     

Effect of Bi and Sr concentrations on the formation of the 2223 phase in Bi-Pb-Sb-Sr-Ca-Cu-O materials, obtained under different conditions of thermal treatment

The superconducting properties and the phase and chemical composition of Bi _x Pb_0.3Sb_0.1Sr _y Ca₂Cu₃O_z (x=1.5, 1.6, and 1.7;y=1.9, 2.0, and 2.1) materials synthesized by one-step and multistep thermal treatments have been investigated. The multistep annealing between 825–875°C promotes the 2223 phase. The change of Bi concentration has little effect on the 2223 phase formation, regardless of the kind of thermal treatment used, but increasing the Sr concentration (y> 2) strongly inhibits this phase. It has also been established that the loss of Pb after synthesis depends on the initial Bi concentration. The loss of Pb decreases when the initial Bi content is lower.     

Measurement and prediction of pressure drop in two-phase flow

Experimental data for air–water two-phase co-current flow in two different pipe diameters were used to test the prediction of pressure drop by a number of existing theories and correlations. Several models are shown to be useful for prediction, particularly with the stratified regimes which have proved difficult to handle in the past. The model suggested by Olujic proved to be of particular value.     

Structural studies of TiN/ZrN multilayer coating deposited by physical vapour deposition

Multilayer coatings have been produced using unbalanced magnetron physical vapour deposition in which discrete layers of TiN and ZrN were co-deposited. It has been shown that the multilayers exhibited two-fold periodicity having values of 13 and 2.8 nm. This periodicity, measured both by cross-sectional transmission electron microscopy and low-angle X-ray diffraction, has been precisely related to the process parameters used. Analysis has shown that a third, previously unreported, phase existed within the coating having a lattice parameter comparable to that of TiN and a well-defined orientation relationship with the primary phases. The existence of this phase has been explained in terms of variations in the stoichometry of the coating due to non-uniform metal to nitrogen deposition rates within the chamber. Textural studies revealed that preferred orientation existed in the coating; the degree of which was greater in the ZrN layers than the TiN layers.     

Movement stability analysis of a pipe string in a thixotropic fluid

Features of movement of a drill pipe string in a well filled with a thixotropic fluid are analyzed taking into account inertial and elastic forces of the rope system. It is shown that processes of fluid structure degradation can lead to nonstationary movement of the pipes. In this case periodic and chaotic auto-oscillations are excited in the system.Bashkir State University, Ufa, Russia. Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 66, No. 4, pp. 405–411, April, 1994.     

Monitoring methodologies of the acid cleaning of steam generators

Some general considerations about the validity and usefulness of corrosion rate monitoring using the polarization resistance method are developed and the theory of Stern and Geary is shortly discussed. The basic aspects of the acid cleaning of steam generators, the role of corrosion inhibitors and the approach of the author with respect to the problem of monitoring this operation are also reviewed. The main aim of this applied research was to verify the reliability of a corrosion meter in predicting the correct order of magnitude of the corrosion rate of a plain carbon steel and two low alloy steels. Measurements under dynamic conditions, with the solution flow rates of 0.5, 1.0 and 1.5 ms^?1, were performed in 5% by weight HCl solutions at 75°C containing a specific commercial inhibitor at two concentrations. Results indicate that the manufacturer calibration of the corrosion meter is not able to provide a realistic evaluation of the corrosion rate of the probe electrodes. Furthermore, it was experimentally demonstrated that probe and tubular specimens of the same material exhibit a different electrochemical behaviour. Therefore, a reliable evaluation of the true corrosion rate of tubular specimens should be made using appropriate calibration charts for the given environment and geometry of the electrochemical probe. At last, some alternating current measurements performed at 10 Hz showed that corrosion rate monitoring based on low-frequency signals could prove very useful for controlling the aggressiveness of the acid-cleaning solution.