Effects of load modeling in security constrained OPF studies

Results of computational experiments carried out on an adaptation of the AEP/IEEE 30 bus test system are reported. Some selected buses were modeled using an exponential type of load model. Three cases are considered. In the first case it is assumed that the specified load at modeled buses is obtained with unity voltage. In the second case it is assumed that the transformer taps have been adjusted to give all industrial-type consumers one per unit at the low-voltage panel when the high-side voltage corresponds to the standard optimal power flow (OPF) solution. The third case differs from the second in that the specified power demand is assumed to take place when the high-side voltages correspond to the intact case of the standard security constrained OPF solution. It is concluded that a decrease in fuel cost can be obtained in some instances when load models are incorporated in security constrained OPF studies during contingencies only. In situations where a decrease in fuel cost is obtained in this manner, the magnitude of decrease depends on the total percentage of load fed by fixed tap transformers and the sensitivity of these loads to modeling     

Calculation of threshold and critical characteristics of ferritic-pearlitic steels

Translated from Fiziko-Khimicheskaya Mekhanika Materialov, Vol. 27, No. 4, pp. 77–81, July–August, 1991.     

Effect of Annealing on the Surface Microstructure of Y-Ba-Cu-O Superconducting Ceramics

Precusors to the YBa₂Cu₃O_7-δ material were prepared by both the oxalate precipitation method and conventional ceramic processing. Second-phase grains were observed to develop on the exposed fracture surface during annealing at 500° to 600°C in an ambient atmosphere. The second-phase grains were identified to be BaCO₃ using EDX and XRD. The liquid phase, which was formed because of local chemical inhomogeneity in the Y-Ba-Cu-O system, contributed to the formation of second-phase grains as a source of Ba.     

A reliable and manufacturable method to induce a stress of >1 GPa on a P-channel MOSFET in high volume manufacturing

This letter discusses a reliable and manufacturable integration technique to induce greater than 1 GPa of stress into a p-channel MOSFET, which will be required to increase the drive current beyond 1 mA//spl mu/m at the sub-90-nm process generation. Uniaxial compressive stress is introduced into the p-channel by both a selective deposition of SiGe in the source/drain and an engineered 2.5-GPa compressively stressed nitride. The highest to date compressively stressed SiN film is obtained by heavy ion bombardment during the deposition of the film.     

Intelligent structuring and exploration of digital music collections

In this paper we present a general approach to the automatic content-based organization and visualization of large digital music collections. The general methodology consists in extracting musically and perceptually relevant patterns (‘features’) from the given audio recordings (e.g., mp3 files), using topology-preserving data projection methods to map the entire music collection onto two-dimensional visualization planes (possibly in a hierarchical fashion), and using a new display metaphor (the ‘Islands of Music’) to display the inherent structure of the music collection to the user. It is shown how arbitrary meta-data can be integrated into the visualization process, and how similarity according to different viewpoints can be defined and exploited. The basic methodology is briefly described, three prototype systems are presented, and a general discussion of the practical application possibilities of such technologies is offered.     

Deterministic Chaos during First-Order Phase Transitions in a Liquid–Vapor System

A model is developed in which the theory of deterministic chaos for the interface layer is used to treat both homophase and heterophase fluctuations of density (volume) and the fluctuations of pressure, whose duration increases as the critical point is approached. This approach, based on the transition from continuous differential equations to mappings, leads to a number of important consequences in theoretical analysis of high-temperature processes of evaporation and condensation, including the loss of information on the initial conditions, the alternation, and the presence of branching points on bifurcation diagrams.     

A Sampling Approach for Intentional Islanding of Distributed Generation

This paper proposes an innovative way of making a decision to island (or synchronize) distributed generators when operating conditions of a distribution system are varied. Islanding decisions are made when a network undergoes disturbances. In this approach, there is a decision-making mechanism, which samples states of the network operating condition to either synchronize or island in an identified period of time. Decision making is achieved through extended sequential sampling, which manages generator states within specific time periods. The approach can minimize the duration of islanded operation and manage generators' re-connection to the grid. Use of the proposed mechanism and sampling approach offer benefits over conventional relays; incorrect operations due to errors in measurements are reduced because the operational actions are not based on a single decision sample, but instead rely on extended sequential sampling over a number of samples. A case study is investigated using the IEEE 30-bus test system and the results are presented for this new approach     

The CORSET time-of-flight spectrometer for measuring binary products of nuclear reactions

The CORSET time-of-flight spectrometer has been developed at the Flerov Laboratory of Nuclear Reactions of the Joint Institute for Nuclear Research (Dubna, Russia) for investigating binary products of nuclear reactions. The spectrometer has been used to study the dynamics of fusion-fission and quasi-fission of superheavy elements. The design and the main characteristics of the spectrometer, as well as the algorithms for deducing the mass-energy distributions of fragments and the cross sections of nuclear reactions, are presented. The spectrometer contains two time-of-flight arms based on microchannel-plate detectors and three telescopes, each of which is composed of two microchannel-plate detectors and one semiconductor detector. A system of four semiconductor detectors is used to obtain the absolute value of a cross section. The time resolution of the time-of-flight arms is 150 ps, which allows the time-of-flight distances to be set at 10–20 cm, thus providing a mass resolution of 3 amu and an angular resolution of 0.3°. Owing to these characteristics, the spectrometer can be used as a trigger in multidetector setups for measuring light charged particles, neutrons, and γ rays in coincidence with reaction fragments.     

Influence of the silicon surface treatment by plasma etching and scratching on the nucleation of diamond grown in HFCVD - a comparative study

A comparative study for the nucleation of diamond was carried out using surface treatment like (i) surface scratching with 1 μm diamond paste and (ii) surface etching using chlorine plasma at different RF powers (50, 100 and 150 W). Atomic force microscopic study shows variation in roughness from 31 nm to 110 nm. Scratching results in random scratches, whereas plasma etches a surface uniformly. Scanning electron microscopic observations show well faceted crystallites with a predominance of angular shaped grains corresponding to 〈100〉 and 〈110〉 crystallite surfaces for the scratched as well as plasma etched substrate. Surface etching at 150 W plasma power results in a better growth in comparison with 50 and 100 W plasma powers. Chlorine-radical is found responsible for the changes in the growth morphology. Raman spectroscopy shows a sharp peak at 1,332 cm⁻¹ and a peak at ∼1,580 cm⁻¹ for both samples.