Granular biofilm-based anaerobic digestion: molecular biomonitoring and high-rate psychrophilic treatment of phenolic wastewater.

Two pairs of expanded granular sludge bed (EGSB) bioreactors, R1/R2 and R3/R4, were designed. R1/R2 were used for mesophilic (37 degrees C) treatment of synthetic wastewater over a 100-day trial. A successful start-up was achieved by R1 and R2, with COD removal over 90%. Both reactors were operated under identical parameters; however, increased organic loading induced a reduction in COD removal by R1, while R2 maintained satisfactory performance throughout the experiment. R3/R4 were operated at 15 degrees C throughout a 422-day trial and were used for the stabilisation of volatile fatty acid-based wastewater. Phenol was introduced to R4 at an applied loading rate of 1 kg phenol m(-3)d(-1), which was increased to 2 kg phenol m(-3)d(-1). No phenol was supplied to R3. Efficient COD conversion was recorded in both R3 and R4, thus demonstrating the feasibility of high-rate phenol degradation under psychrophilic conditions. Terminal restriction fragment length polymorphism analysis was applied to the characterisation of microbial community dynamics within each of the reactors. The results indicated a microbiological basis for the deviation, in terms of operational performance, of R1 and R2. TRFLP analyses indicated stable microbial communities in R3 and R4, but detected changes in the abundance of specific ribotypes in response to phenol mineralisation.     

Evidence for Remote Effects of Dreissenid Mussels on the Amphipod Diporeia: Analysis of Lake Ontario Benthic Surveys, 1972–2003

The status of invasive dreissenid mussels (Dreissena polymorpha and D. bugensis) and native amphipods (Diporeia spp.) in Lake Ontario was assessed in 2003 and compared with historical data. D. polymorpha (zebra mussels) were rarely observed in 2003, having been displaced by D. bugensis (quagga mussels). D. bugensis expanded its depth range from 38 m depth in 1995 to 174 m in 2003 and this dreissenid reached densities averaging 8,000/m² at all sites < 90 m. During the same time period, Diporeia populations almost completely disappeared from 0–90 m depth, continuing a declining trend from 1994–1997 reported in previous studies. The average density of Diporeia in the 30–90 m depth interval decreased from 1,380/m² to 63/m² between 1997 and 2003. Prior to 2003, areas deeper than 90 m represented a refuge for Diporeia, but even these deep populations decreased, with densities declining from 2,181/m2 in 1999 to 545/m2 in 2003. Two common hypotheses for the decline of Diporeia in the Great Lakes are food limitation and a toxin/pathogen associated with dreissenid pseudofeces. The Diporeia decline in deep waters preceded the expansion of D. bugensis to these depths, and suggests that shallow dreissenid populations remotely influence profundal habitats. This pattern of decline is consistent with mechanisms that act from some distance including nearshore dreissenid grazing and downslope transport of pseudofeces.     

Automated design system for an axial fan

Translated from Khimicheskoe i Neftyanoe Mashinostroenie, No. 3, pp. 8–9, March, 1992.     

Liquefaction evaluation at a California substation site

A probabilistic seismic hazard analysis, in conjunction with subsurface geologic investigations, was used to evaluate the liquefaction potential of sand layers at Western Area Power Adminstration's Tracy, California, substation site. The seismic hazard analysis evaluates the peak ground acceleration corresponding to a lower level earthquake with a 50-percent probability of occurrence in 150 years, and two upper level earthquakes with a 10-percent probability of occurrence in 50 and 100 years. Based on the results of the geologic investigations and seismologic studies, it was concluded that the potential of liquefaction at the site for the design earthquakes was low     

Pulsatile ocular blood flow variations with axial length and refractive error

Benign symmetric lipomatosis (BSL), also known as Madelung's disease, is a rare condition and characterized by diffuse but painless growth of unencapsulated lipomas. A close correlation to alcohol and nicotine abuse, metabolic disturbances and malignant tumours have been observed. Surgical treatment is frequently followed by recurrence, nevertheless, it can yield satisfactory functional and cosmetic results. A case of BSL with uncommonly distributed tumors is reported.     

Optimum expansion planning of an unconventional generation systemoperating in parallel with a large scale network

A package for the long-term optimal expansion planning of a generation system with renewable energy sources operating in parallel with a large-scale network is presented. The algorithm utilizes meteorological data, load demand data, and estimated economical parameters and determines the candidate plans for the expansion period. A forward dynamic programming algorithm is utilized to determine the optimal plan. Results from the application of the method to a local grid are presented     

Bestimmung der Abtragungsraten von Zirconium,Tantal und der Legierung Tantal-40Niob in fluoridhaltiger azeotroper Salpetersäure mit Hilfe der Radiotracer-Methode

The radiotracer technique as a means to investigate the corrosion of zirconium, tantalum, and a Ta-40Nb alloy in fluoride containing azeotropic nitric acid Zirconium and tantalum as well as the tantalum 40% niobium alloy are of considerable technical importance due to their high corrosion resistance against numerous corrosive media. With respect to corrosion testing in analytically pure azeotropic nitric acid in the temperature range between 20 and 121°C, corrosion rates were determined for zirconium: 7 · 10^?6 to 5 · 10^?4 mm/y, for tantalum: 10^?8 to 4 · 10^?6 mm/y, and for the Ta-40Nb alloy: 2 · 10^?7 to 8 · 10^?6 mm/y [1]. These corrosion rates will be markedly increased by adding small amounts of fluorides or by fluoride impurities. The radiotracer method after neutron activation was applied to determine the corrosion rates in azeotropic fluoride containing nitric acid. Even minute additions of fluorides strongly affect the corrosion resistance of zirconium. In the range between 0.15 and 10 ppm F^? and at a temperature of 108°C, corrosion rates between 5.3 · 10^?3 and 3.1 mm/y were measured. It was impossible to establish a limit for the fluoride concentration, below which the corrosion rate of zirconium will not be adversely influenced. The corrosion rates of tantalum and the Ta-40Nb alloy are considerably increasing above a fluoride concentration of 10 ppm. The highest corrosion rates measured were between 8.4 · 10^?3 mm/y at 50°C/280 ppm F^? and 1.4 · 10^?2 mm/y at 110°C/320 ppm F^?. Within the range of this investigation, the corrosion resistance of tantalum was higher than that of the Ta-40Nb alloy by one order of magnitude. The corrosion resistance of zirconium and tantalum was not influenced by any treatment of the samples before testing.