ADC Non-Linearity Low-Cost Test Through a Simplified Double-Histogram Method

This paper introduces a method to reduce the requirements of the test sources for evaluating the non-linearity characteristics of Analogue-to-Digital converters. The method is based on a non-interleaved Double-Histogram test independent of the test signal waveform. It has been validated by simulation results in a 16-bit pipeline A/D converter and by an experimental example using the AD6644 commercial converter.     

Single-channel blind estimation of arterial input function and tissue impulse response in DCE-MRI

Multipass dynamic MRI and pharmacokinetic modeling are used to estimate perfusion parameters of leaky capillaries. Curve fitting and nonblind deconvolution are the established methods to derive the perfusion estimates from the observed arterial input function (AIF) and tissue tracer concentration function. These nonblind methods are sensitive to errors in the AIF, measured in some nearby artery or estimated by multichannel blind deconvolution. Here, a single-channel blind deconvolution algorithm is presented, which only uses a single tissue tracer concentration function to estimate the corresponding AIF and tissue impulse response function. That way, many errors affecting these functions are reduced. The validity of the algorithm is supported by simulations and tests on real data from mouse. The corresponding nonblind and multichannel methods are also presented.     

WCDMA Uplink Capacity of Highways Cigar-Shaped Microcells with Incorporated HSUPA Service

The multi-service (voice, data and HSUPA) uplink capacity and the interference statistics of the sectors of the cigar-shaped WCDMA microcell are studied using a model of 5 highway microcells. The two-slope propagation loss model with lognormal shadowing is used in the analysis. It is concluded that the voice and data service are significantly affected by HSUPA users and sector capacity decreases dramatically when one of these users gets connected to a given sector or to one next to it. Also it has been concluded that the capacity decrement is highly sensitive to the location of the HSUPA users. Thus, no more than one HSUPA with a process gain of 16 can be connected to a given base station. In this case, the HSUPA user should interrupt its transmission when it is near to the sector border. No more than one HSUPA user with a process gain of 8 is permitted in a given sector and the sector next to it. When the HSUPA user is at the sector border, its transmission should be disabled.     

Study of Complete Thermoelectric Generator Behavior Including Water-to-Ambient Heat Dissipation on the Cold Side

Reduction of the thermal resistances of the heat exchangers of a thermoelectric generation (TEG) system leads to a significant increase in TEG efficiency. For the cold side of a thermoelectric module (TEM), a wide range of heat exchangers have been studied, from simple finned dissipators to more complex water (water–glycol) heat exchangers. As the Nusselt number is much higher in water heat exchangers than in conventional air finned dissipators, the convective thermal resistances are better. However, to conclude which heat exchanger leads to higher efficiencies, it is necessary to include the whole system involved in the heat dissipation, i.e., the TEM-to-water heat exchanger, the water-to-ambient heat exchanger, as well as the required pumps and fans. This paper presents a dynamic computational model able to simulate the complete behavior of a TEG, including both heat exchangers. The model uses the heat transfer and hydraulic equations to compute the TEM-to-water and water-to-ambient thermal resistances, along with the resistance of the hot-side heat exchanger at different operating conditions. Likewise, the model includes all the thermoelectric effects with temperature-dependent properties. The model calculates the net power generation for different configurations, providing a methodology to design and optimize the heat exchange in order to maximize the net power generation for a wide variety of TEGs.     

Physical fundamentals of external transient latch-up and corrective actions

Detailed transient latch-up (TLU) analysis of external test structures show that a DC trigger does not necessarily reflect worst-case conditions. Furthermore, the classical guard ring latch-up protection approach fails for a transient trigger. In this contribution, the physical mechanism of TLU triggering is presented. The knowledge of physical phenomenons causing TLU triggering enables the derivation of design recommendations for integrated circuits.     

Mapping of Discrete Cosine Transforms onto Distributed Hardware Architectures

We present an algorithmically-aware, high-level partitioning methodology for discrete cosine transforms (DCT) targeted to distributed hardware architectures. The methodology relies on the exploration of alternate DCT formulations as part of the partition optimization process. To the best of our knowledge, no previously proposed DCT algorithm exists that is capable of consistently producing alternate regular formulations for an n-size DCT. Hence, a new Cooley-Tukey-like DCT factorization algorithm was developed to allow exploration of alternate formulations as part of the partitioning optimization process. The use of our factorization mechanism along with a greedy strategy to explore the space of equivalent DCT formulations yielded partitioning solutions with as much as 18% reduction in latency and 83% reduction in run-time as compared to previously proposed regular DCT formulations.

Performance of a Binary PPM Ultra-Wideband Communication System with Direct Sequence Spreading for Multiple Access

In this paper, we present an analysis of the BER performance of an ultra-wideband (UWB) system with pulse position modulation (PPM) for data modulation and direct sequence (DS) spreading for multiple access over indoor lognormal fading channels. A rake receiver is used to combine a subset of the resolvable multipath components using the maximal ratio combining technique. Inter-path and multiple-access interferences are modeled and incorporated into the bit-error-rate expressions. The analytical and simulation results allow one to quantify many critical aspects of a DS-PPM UWB system such as the gain of the optimally spaced signaling scheme over the orthogonal signaling scheme, the potential error floor given a specific channel multipath delay spread and the number of interfering users, tolerance of the system to timing jitter, and impact of user codes.     

Computing the Detection Probability for Small Delay Defects of Nanometer ICs

Interconnect imperfections have become an important issue in modern nanometer technologies. Some of them cause Small Delay Defects (SDDs) which are difficult to detect. Those SDDs not detected during testing may pose a reliability problem. Furthermore, nanometer issues (e.g. process variations, spatial correlations) represent important challenges for traditional delay test methods. In this paper, a methodology to compute the Detection Probability (DP) of resistive open and bridge defects using a statistical timing framework that takes into account process variations and other nanometer issues is proposed. The DP gives the sensitivity of the circuit performance to a given resistance range of the defect. The efficiency issue when analyzing large circuits is alleviated using stratified sampling techniques to reduce the space of possible analyzed defect locations This methodology is applied to some ISCAS benchmark circuits. The obtained results show the feasibility of the proposed methodology. Measures can be taken for those circuits presenting non-acceptable DP in order to improve the test quality.     

Bandwidth Aspects in Second Generation Current Conveyors

This paper discusses bandwidth problems associated with second-generation current conveyors (CCII). In particular, our work is centered in high-capacitance applications, and has been oriented for wireless optical links and applied physics. We discuss techniques for improving bandwidth in these CCIIs, and develop a new CCII structure with larger bandwidth than traditional circuits. These circuits are then compared in terms of their noise and dynamic range characteristics. A test circuit was developed to verify these different bandwidth behaviors.