A high-density heat-sink-mounted inductor for automotive applications

Passive components, and inductors, in particular, contribute greatly to the overall volume of power electronic converters. These components are normally packaged individually with little concern for the overall system. For high-density switching power supplies it is imperative to minimize the volume to as great an extent as possible which implies that the passive component volume usage needs to be improved. This can be accomplished by applying suitable packaging and cooling techniques to these components. In this paper, two inductor structures finding application in a 2.1-kW synchronous automotive converter are described. The air-gap placement, losses, cooling methods, and thermal profiles are analyzed and verified experimentally with an inductor designed for operation at 85/spl deg/C ambient.     

Harnessing anaerobic digestion for combined cooling,heat, and power on dairy farms: An environmental life cycle and techno-economic assessment of added cooling pathways

Anaerobic digestion coupled with combined heat and power production on dairy farms is environmentally advantageous; however, high capital and operating costs have limited its adoption, especially in the United States, where renewable electricity and heat production are under-incentivized. Biogas is also at a disadvantage because it has to compete with very low natural gas prices. The objective of this study was to evaluate the feasibility of integrating absorption refrigeration technology for combined cooling, heat, and power (CCHP) on the farm to help bridge this economic hurdle. A combined environmental life cycle and techno-economic assessment was used to compare 2 cooling pathways with and without co-digestion. We considered using CCHP to (1) displace electricity-driven refrigeration processes (e.g., milk chilling/refrigeration, biogas inlet cooling) or (2) mitigate heat stress in dairy cattle via conductive cow cooling. All cooling scenarios reduced environmental emissions compared with combined heat and power only, with an appreciable reduction in land use impacts when employing conductive cow cooling. However, none of the cooling scenarios achieved economically viability. When using cooling power to displace electricity-driven refrigeration processes, economic viability was constrained by low electricity prices and a lack of incentives in the United States. When used for conductive cow cooling, economic viability was constrained by (1) low waste heat-to-cooling conversion efficiency; (2) limited conductive cow cooling effectiveness (i.e., heat-stress mitigation); and (3) low heat stress frequency and limited severity. However, we predict that with minor improvements in conductive cow cooling effectiveness and in hotter climates, CCHP for conductive cow cooling would be economically viable even in current US energy markets.     

The cortisol response to psychological stress in temporomandibular dysfunction

Recombinant antibody fragments can be produced in large quantities using bacterial expression systems and could potentially be useful for the generation of biofilters for the selective removal of viral particles from fluids. A human single chain-Fv antibody library, derived from synthetic repertoires of germ line VH-gene segments rearranged in vitro and paired to a single light chain (Nissim et al., 1994, EMBO J., 13, 692-698), has recently been used to isolate hundreds of different binding specificities by panning with antigen. Antibodies from this library typically have affinities in the 10(6)-10(7) M-1 range. Occasionally, better binders are isolated but at other times the affinities recovered are poor. In the latter situation binding cannot be detected with soluble antibodies, but only by high-avidity display of multiple copies of antibodies on phage. By panning with human cytomegalovirus (HCMV)-coated immunotubes, we have isolated a number of antibody clones from this library that bound to the antigen only if displayed on the filamentous phage, but not in soluble form. One of these clones was selected for an affinity maturation procedure, achieved by combinatorial mutagenesis of the complementarity determining region 3 (CDR3) of the antibody light chain, followed by selection of the resulting library for HCMV binding. By this means, we were able to isolate a number of binders, some of which exhibited specific HCMV binding in soluble form. The clone that gave the strongest ELISA signal was expressed in bacteria, purified in solution, characterised using a novel capture methodology with surface plasmon resonance detection on a BIAcore instrument and used for the production of an immunofilter for the removal of HCMV form human serum. The filter removed more than 99% of applied HCMV in 10 min circulation time, while the amount of HCMV retained non-specifically in a cartridge derivatised with a non-specific antibody was less than 10% under similar conditions.     

Stenting of "unprotected" left main coronary artery stenoses: early and late results

The effect of bone plug length and Kurosaka screw (DePuy, Warsaw, IN) diameter on graft holding strength of the bone-tendon-bone construct was determined. Random length porcine bone plugs were assigned to fixation with 7 or 9 mm Kurosaka screws. Peak load to failure was determined. There was a significant decrease in peak load to failure of the 5-mm long bone plugs compared with longer bone plugs. No difference was found between longer lengths of bone plug in either the 7- or 9-mm screw diameter groups. The 9-mm diameter screws significantly increased peak load to failure for both 1- and 2-cm bone plug lengths.     

Issues and options in addressing the environmental consequences of livestock sector’s growth

The growth of the livestock sector is being achieved at substantial environmental costs. Today, livestock are a major stressor of the global environmental, occupying a quarter of emerged land (including a third of arable land), contributing close to a fifth of the anthropogenic greenhouse gas emissions, using eight percent of all water resources and threatening a wide range of endangered species. At the same time, livestock are also a crucial engine of rural growth and a tool for improving food security. Policies are required to guide the sector in achieving sometimes conflicting development objectives. Potential pathways include encouraging resource use efficiency, correcting for environmental externalities and accelerating technological change.     

Unsteady Flow Predictions of Initial Surface Formation in Aluminum Strip Casting

A comprehensive multidomain computational fluid dynamics model is described for examining the unsteady thermal-fluid dynamic conditions at the early onset of surface formation in aluminum strip casting. By employing zones for the solidifying melt, substrate, high-speed water jets, and active film for thermal buffering between the melt and the substrate, a fully implicit in time solution is obtained. Furthermore, the melt domain transport equations are cast in an Eulerian–Lagrangian form to include the motion of a backward-facing compliant step and its associated contact line, both affecting the initial melt–substrate contact cooling conditions. The influence of the compliant step motion on the thermal-fluid history at the earliest stages of surface formation is examined. Results show a well-defined characteristic response between the contact line motion and the solid fraction/temperature history. Associated recirculation cells are affected profoundly by contact line motion and exhibit cyclical removal and reappearance. Coupled with large relative velocity between phases at the contact line, overall flow patterns suggest conditions for alloy segregation.     

Reporting risks and benefits of therapy by use of the concepts of unqualified success and unmitigated failure: applications to highly cited trials in cardiovascular medicine

BACKGROUND: The NNT (number needed to treat) and NNH (number needed to harm) are useful in conveying the results of clinical trials because they emphasize the effort that must be expended to accomplish a single, tangible outcome. But NNT conveys the effort required to achieve a positive outcome without distinguishing between the presence or absence of treatment-related adverse events. Similarly, NNH conveys harm without accounting for the achievement or lack of achievement of the benefit of therapy. Consequently, a mathematical model was developed to extend the NNT and NNH to represent the effort required to achieve "unqualified success" (NNTUS, treatment success without treatment-induced side effects) and "unmitigated failure" (NNHUF, lack of treatment success with treatment-induced side effects). METHODS AND RESULTS: NNTUS was calculated by adjusting the absolute risk reduction to allow for the probability of not incurring a treatment-related adverse event. NNHUF was similarly calculated by adjusting the absolute risk of incurring a treatment-related adverse event by the probability of not incurring any treatment-related benefit. The impact of conveying clinical trial data by the use of NNT, NNTUS, NNH, and NNHUF is illustrated by means of 11 highly cited trials identified systematically from the cardiovascular literature. The treatment effort measured by the NNTUS and the NNHUF was consistently higher than that given by the traditional NNT and NNH. These increments ranged from 1% to several hundred percent. CONCLUSIONS: The NNTUS and the NNHUF represent the treatment effort required on average to achieve 1 unqualified success and 1 unmitigated failure. NNTUS and NNHUF balance benefit and harm in an objective way and are relevant for making service delivery decisions.