High-power high-Modulation-speed 1060-nm DBR lasers for Green-light emission

We report on the static and dynamic performance of high-power and high-modulation-speed 1060-nm distributed Bragg reflector (DBR) lasers for green-light emission by second-harmonic generation. Single-wavelength power of 387 mW at 1060-nm wavelength and green power as high as 99.5 mW were achieved. A thermally induced wavelength tuning of 2.4 nm and a carrier-induced wavelength tuning of -0.85 nm were obtained by injecting current into the DBR section. Measured rise-fall times of 0.2 ns for direct intensity modulation and 0.6 ns for wavelength modulation make the lasers suitable for >50-MHz green-light modulation applications.     

Supplemental protein plus ruminally protected methionine and lysine for primiparous beef cattle consuming annual rye hay

Primiparous beef cows (n = 35 Bos taurus, average initial BW of 498 kg) were allotted to treatments in a split-plot designed experiment to determine the effects of supplemental ruminally protected amino acids on cow and calf productivity and metabolic changes in the cows. Cows were fed chopped annual rye hay at 1.5% of BW. The following treatments were used: 1) .8 kg soybean hulls, 1.4 kg ground corn, .6 kg soybean meal (CON); 2) 1.4 kg ground corn, 1.4 kg soybean meal (PRO); 3) PRO plus ruminally protected methionine and lysine (supplied 5 and 10 g, respectively; PRO1); and 4) PRO with twice the level of ruminally protected amino acids in PRO1 (PRO2). Cow weight gain was not different (P > .26) among treatments and averaged 1.2 kg/d for the 45 + 6 d before parturition. After parturition, cow weight gain did not differ (P > .47) between CON and PRO treatments, but it decreased quadratically (P < .01) with increasing level of ruminally protected amino acids. Total milk yield, protein, and fat (4 h) were greater (P < .05) for cows consuming PRO supplements than for CON, whereas CON cattle tended (P = .11) to lose less body condition. Total milk protein showed a quadratic increase (P < .05) in response to level of ruminally protected amino acids that was the inverse of the quadratic response noted for cow weight gain. Serum urea N concentration was greater (P = .07) for cattle consuming additional protein. Metabolic hormones were not affected (P > .18) by dietary treatment, but they responded (P < .05) to changes in physiological state. Supplements with additional protein supported greater (P = .0001) milk urea N concentration and output. Milk urea N concentration increased (P < .05) and milk IGF-I decreased (P < .05) as the lactation period progressed. The measurement of CON and PRO diets revealed that supplements with additional soybean meal had greater (P < .05) DM and N degradation; the extent of forage DM and NDF degradation was similar (P > .05) among treatments. Production shifted away from body weight gain to increased milk protein production when daily supplementation of ruminally protected methionine and lysine increased from 5 and 10 to 10 and 20 g, respectively. This shift in production was not reflective of changes in the metabolic regulators measured.     

Analysis of the role of inhibition in shaping responses to sinusoidally amplitude-modulated signals in the inferior colliculus

Neurons in the central nucleus of the inferior colliculus (ICc) typically respond with phase-locked discharges to low rates of sinusoidal amplitude-modulated (SAM) signals and fail to phase-lock to higher SAM rates. Previous studies have shown that comparable phase-locking to SAM occurs in the dorsal nucleus of the lateral lemniscus (DNLL) and medial superior olive (MSO) of the mustache bat. The studies of MSO and DNLL also showed that the restricted phase-locking to low SAM rates is created by the coincidence of phase-locked excitatory and inhibitory inputs that have slightly different latencies. Here we tested the hypothesis that responses to SAM in the mustache bat IC are shaped by the same mechanism that shapes responses to SAM in the two lower nuclei. We recorded responses from ICc neurons evoked by SAM signals before and during the iontophoretic application of several pharmacological agents: bicuculline, a competitive antagonist for gamma-aminobutyric acid-A (GABAA) receptors; strychnine, a competitive antagonist for glycine receptors; the GABAB receptor blocker, phaclofen, and the N-methyl-D-aspartate (NMDA) receptor blocker, (-)-2-amino-5-phosphonopentanoic acid (AP5). The hypothesis that inhibition shapes responses to SAM signals in the ICc was not confirmed. In >90% of the ICc neurons tested, the range of SAM rates to which they phase-locked was unchanged after blocking inhibition with bicuculline, strychnine or phaclofen, applied either individually or in combination. We also considered the possibility that faster alpha-amino-3-hydroxy-5-methylisoxazole-4-propionic acid (AMPA) receptors follow high temporal rates of incoming excitation but that the slower NMDA receptors could follow only lower rates. Thus at higher SAM rates, NMDA receptors might generate a sustained excitation that "smears" the phase-locked excitation generated by the AMPA receptors. The NMDA hypothesis, like the inhibition hypothesis, was also not confirmed. In none of the cells that we tested did the application of AP5 by itself, or in combination with bicuculline, cause an increase in the range of SAM rates that evoked phase-locking. These results illustrate that the same response property, phase-locking restricted to low SAM rates, is formed in more than one way in the auditory brain stem. In the MSO and DNLL, the mechanism is coincidence of phase-locked excitation and inhibition, whereas in ICc the same response feature is formed by a different but unknown mechanism.     

Scaling the Aspect Ratio of Nanoscale Closely Packed Silicon Vias by MacEtch: Kinetics of Carrier Generation and Mass Transport

Metal‐assisted chemical etching (MacEtch) has shown tremendous success as an anisotropic wet etching method to produce ultrahigh aspect ratio semiconductor nanowire arrays, where a metal mesh pattern serves as the catalyst. However, producing vertical via arrays using MacEtch, which requires a pattern of discrete metal disks as the catalyst, has often been challenging because of the detouring of individual catalyst disks off the vertical path while descending, especially at submicron scales. Here, the realization of ordered, vertical, and high aspect ratio silicon via arrays by MacEtch is reported, with diameters scaled from 900 all the way down to sub‐100 nm. Systematic variation of the diameter and pitch of the metal catalyst pattern and the etching solution composition allows the extraction of a physical model that, for the first time, clearly reveals the roles of the two fundamental kinetic mechanisms in MacEtch, carrier generation and mass transport. Ordered submicron diameter silicon via arrays with record aspect ratio are produced, which can directly impact the through‐silicon‐via technology, high density storage, photonic crystal membrane, and other related applications.     

The Role of Σ9 Boundaries in Grain Boundary Engineering

In a grain-boundary-engineered (GBE) microstructure, Σ9 boundaries are the second most abundant boundary type. This article presents data showing that, in GBE copper, most Σ9s were special. Σ9 boundaries are also a geometrically necessary component of a GBE microstructure. It is suggested that there are competing requirements for Σ9s; during iterative GBE processing, they are required to be mobile, whereas afterward, it is desirable that they are special boundaries.     

Effect of dietary and synthetic chelating agents on the intestinal absorption of lead

The effect of a number of dietary and synthetic chelating agents on the intestinal absorption of lead has been examined using the everted sac preparation and the tracer isotope ²⁰³Pb. All the agents examined increased lead transport into the serosal compartment. An explanation of the way in which these agents modify the model to describe lead transport is proposed.     

Investigation of a Unique Commonality from a Wide Range of Natural Materials as Viewed from the Maillard Reaction Perspective

Based on the characteristics of a wide range of natural products, a more comprehensive understanding of the role of the Maillard reaction has been developed which describes a molecular basis for the production of a common set of flavourful, volatile aromatic compounds from the reactions between amino acids and sugars at elevated temperature (pressure cooking). By employing a variety of natural products, a clearer knowledge of the common mechanisms for the production of many important flavourants and odourants has been established. Regardless of the starting natural product the same qualitative profile of volatile materials is produced upon ‘pressure cooking’ an aqueous extract of the natural product. The notable differences in aroma arise not from significant differences in the qualitative nature of the materials but from variations in the quantitative distribution of the volatile materials produced.     

Printed, flexible electrochromic displays using interdigitated electrodes

We describe herein some of our initial studies in pursuit of a simple, economical method of mass producing electrochromic displays. The approach we have taken is to print the display on polymer film utilizing commercially available conductive inks in an interdigitated electrode structure with a conductive metal oxide powder, dispersed in a polymer binder, as the electrode surface. A range of electrochromic materials suitable for use with an aqueous gel electrolyte have been explored and examples presented.     

The first step for delayed hydride cracking in zirconium alloys

Two models for delayed hydride cracking (DHC) in zirconium alloys are distinguished by their first step:

-

The loading of a crack induces hydride precipitation. The hydride is postulated to create a hydrogen concentration gradient, where the bulk concentration is greater than that at the crack tip. This concentration gradient is taken as the driving force for diffusion of hydrogen to the crack tip, and subsequent hydride growth. This model is called the precipitate first model (PFM).

-

The tensile stress at the crack tip induces a gradient in chemical potential that promotes the diffusion of hydrogen to the crack tip. Hydrides form if the hydrogen concentration reaches the solubility limit for hydride precipitation. The mechanism is postulated to create a hydrogen concentration gradient, where the bulk concentration is lower than that at the crack tip. The gradient in chemical potential is taken as the driving force for diffusion of hydrogen to the crack tip, and subsequent hydride growth. This model is called the diffusion first model (DFM).

The second model, DFM, is developed. This model is shown to describe the main features of the experimental observations of DHC, without invoking new phenomena, such as reduction in the solubility limit for precipitation of hydride, as required by the PFM.     

Surface photoabsorption monitoring of the growth of GaAs and InGaAs at 650°C by MOCVD

By monitoring the cyclic behavior of surface photoabsorption (SPA) reflectance changes during the growth of GaAs at 650°C and with sufficient H₂ purging time between the supply of trimethylgallium and AsH₃, we have been able to achieve controlled growth of GaAs down to a monolayer. Our results show, as confirmed by photoluminescence (PL) measurements, the possibility of growing highly accurate quantum well heterostructures by metalorganic chemical vapor deposition at conventional growth temperatures. We also present our PL measurements on the InGaAs single quantum wells grown at this temperature by monitoring the SPA signal.