具有区间时变时滞的线性离散系统新稳定准则

该文考虑了具有区间时变时滞线性离散系统的稳定性问题。通过构造适当的Lyapunov-Krasovskii泛函,得到一个改进的具有区间时变时滞线性离散系统的稳定性准则。与现有的此类文献相比较,该文得到了一个具有更小保守性且不需引入多余矩阵变量的稳定性准则。     

Z源直流变换器电感电流断续工作模式分析

Z源变换器具有新型的拓扑结构,在输入直流电源和输出变换器之间采用独特的Z源网络进行连接,以获得更好的升/降压效果.在电感电流断续条件下,对Z源直流变换器的工作状态进行了详细分析,利用稳态条件下电感平均电流为零的条件推导出Z源直流变换器的升压比,进一步分析出临界电感的计算公式,并通过仿真验证了理论分析的正确性.     

一类高阶非线性差分方程的吸引性

在文献[1-2]的基础上,研究了非线性差分方程xn+1=a-bxpn-k/A-x2n的全局稳定性和正解的周期性,其中a,A为非负实数,b为正实数,k,p∈{1,2,…},p≥2.证明了该方程的一个正平衡点是一个全局吸引子,并给出了相应的吸引域.     

Research on the Control Strategy of Variable Nozzle Turbocharger for Natural Gas Engine

A variable nozzle turbocharger (VNT) was applied to a 2.2-liter L4 natural gas engine,and a VNT control system was designed to operate it.Based on VNT matching test results,a VNT control strategy was studied,in which VNT adjustment is carried out through pre-calibrated VNT handling rod position,combined with a closed-loop target boost pressure feedback using proportional-integral-derivative(PID) algorithm.Experimental results showed that the VNT control system presented in this thesis can lead to optimized ...     

Effect of fretting amplitudes on fretting wear behavior of steel wires in coal mines

Given that fretting wear causes failure in steel wires, we carried out tangential fretting wear tests of steel wires on a self-made fretting wear test rig under contact loads of 9 and 29 N and fretting amplitudes ranging from 5 to 180 μm. We observed morphologies of fretted steel wire surfaces on an S-3000N scanning electron microscope in order to analyze fretting wear mecha-nisms. The results show that the fretting regime of steel wires transforms from partial slip regime into mixed fretting regime and gross slip regime with an increase in fretting amplitudes under a given contact load. In partial slip regime, the friction coefficient has a relatively low value. Four stages can be defined in mixed fretting and gross slip regimes. The fretting wear of steel wires in-creases obviously with increases in fretting amplitudes. Fretting scars present a typical morphology of annularity, showing slight damage in partial slip regime. However, wear clearly increases in mixed fretting regime where wear mechanism is a combination of plastic deformation, abrasive wear and oxidative wear. In gross slip regime, more severe degradation is present than in the other regimes. The main fretting wear mechanisms of steel wires are abrasive wear, surface fatigue and friction oxidation.     

基于数值模拟的袋式除尘器清灰性能影响探讨

脉冲清灰是袋式除尘器的过滤再生循环过程,相关的流场分布特性直接影响其清灰性能。针对清灰过程喷吹时间短、速度变化快的特点,建立相应的质量通量方程及非稳态流场模型。通过改变喷嘴结构及喷吹控制参数,采用数值模拟方法获得各种条件下的压力、速度分布云图。实际应用表明：基于数值模拟探讨影响清灰效果的因素及其规律,可为袋式除尘器喷吹清灰的优化设计提供重要参考。     

HP nonlinear guidance law design based on smooth sliding mode control

To eliminate the perturbation of interceptor detection induced by aerodynamic heating,the head pursuit (HP) guidance law for three-dimensional interception was presented. The guidance law positioned the interceptor ahead of the target on its flight trajectory,and the speed of interceptor was required to be lower than that of the target. On the basis of a novel head pursuit three-dimensional guidance model,a nonlinear guidance law was developed based on smooth sliding mode control theory. At the same time,a special observer was designed to estimate the target acceleration,and a numerical example on maneuvering ballistic target interception verified the effectiveness of the presented guidance law.     

Synchronization and channel estimation for MIMO OFDM wireless LAN systems

A new preamble structure is designed for wireless LAN based on MIMO OFDM systems, which can be used for both synchronization and channel estimation. Modulatable orthogonal polyphase sequence is utilized in training symbol design regarding its correlation properties. The time synchronization and channel estimation are achieved by measuring the correlation between the received training sequence and the locally generated training sequence. Repeated training symbols are used to get carrier frequency offset (CFO) estimation. It is shown from the analysis that the accuracy of frequency synchronization is close to the Cramér-Rao lower bound. The training sequences are optimal for channel estimation based on the minimum mean square error (MMSE).     

新型燃煤烟气汞吸附剂的评价研究

利用汞蒸气发生器产生的单质汞,与压缩空气组成模拟烟气,在吸附剂评价实验台上进行吸附剂脱汞实验,研究不同吸附剂对单质汞的脱除效率．实验结果表明,活性炭对汞的吸附效率在60％左右,未改性的燃煤飞灰吸附效率在10％～20％,改性后的燃煤飞灰比表面积有很大程度的提高,吸附效率可以达到25％,与活性炭吸附效率相比仍有不小的差距．     

非线性部分最小二乘方法的研究与应用

该文将部分最小二乘算法与径向基函数神经网络相结合,给出了一种非线性部分最小二乘建模方法,可以更加有效地处理过程非线性和数据共线性等复杂特性,提高模型的精度和推广能力。该方法在确定径向基函数神经网络的隐节点时,采用了一种改进型的k-均值聚类算法来自动确定最优的聚类区数。对煤气化炉合成气组分浓度软测量建模的应用结果表明,采用该方法建立的软测量模型在模型精度和推广能力等方面明显优于二次型多项式部分最小二乘方法建立的模型,并且计算精度满足工业生产的实际要求。