Microstructure and Flow Behavior of Fresh Cement Paste

A rheological technique (creep/recovery) was used, in combination with scanning electron microscopy, to study the effects of hydration on both the microstructure and flow properties of fresh cement paste during the induction period, which is the first few hours after cement and water are mixed. The principal hydration product was calcium silicate hydrate (C-S-H), which was first observed in the neck areas between cement particles. At the same time, yield stress increased progressively, which reflected a strengthening of bonds between particles attributed to the C-S-H. Failure strain also increased, which reflected a fundamental change in the nature of that bond. Based on rheological measurements, the activation energy of the hydration process during this time period was estimated to be 5.2 kcal/mol (˜22 kJ/mol).     

Photochemical ECE and DISP processes. The self-inhibiting disproportionation (SID) mechanisms. Theory and experiment

Channel electrodes are used to characterize the photochemical DISP2 mechanism in respect of the photoelectro-reductions of

1. (i) 9,10-diphenylanthracene,

2. (ii) benzophenone and

3. (iii) 4-fluorobenzophenone.

Quantitative measurements show that the simple DISP2 mechanism requires extension to allow for the possibilities of first a conproportionation step acting as a back-reaction to the disproportionation, and of second quenching of the excited state which leads to reaction. Both these steps, if present, serve to inhibit the overall DISP2 process. Accordingly a general scheme of Self-Inhibiting Disproportionation (SID) Mechanisms is introduced and characterized in the channel electrode geometry by computer simulations. A general protocol is established for identifying the various possible sub-cases of the general SID mechanism and illustrated with reference to the three experimental systems of interest, in all of which both conproportionation and quenching are shown to be mechanistically significant.     

Multiple Chemical Features Impact Biological Performance Diversity of a Highly Active Natural Product-Inspired Library

A systematic, diversity-oriented synthesis approach was employed to access a natural product-inspired flavonoid library with diverse chemical features, including chemical properties, scaffold, stereochemistry, and appendages. Using Cell Painting, the effects of these diversity elements were evaluated, and multiple chemical features that predict biological performance diversity were identified. Scaffold identity appears to be the dominant predictor of performance diversity, but stereochemistry and appendages also contribute to a lesser degree. In addition, the diversity of chemical properties contributed to performance diversity, and the driving chemical property was dependent on the scaffold. These results highlight the importance of key chemical features that may inform the creation of small-molecule, performance-diverse libraries to improve the efficiency and success of high-throughput screening campaigns.     

Concentration of Stearidonic Acid in Free Fatty Acids Form from Modified Soybean Oil by Selective Esterification with Dodecanol

The concentration of stearidonic acid (SDA, 18:4 n-3) in free fatty acids (FFA) formed by selective esterification with dodecanol (lauryl alcohol) was studied. For this purpose, modified soybean oil (initial SDA content, ~23 %) was converted into its corresponding FFA by chemical hydrolysis. In a second step, the resulting FFA were esterified with dodecanol. Process variables such as the type of biocatalyst (lipase), substrate molar ratio and amount of lipase were evaluated. The best SDA concentration (58 %) and recovery (94 %) were attained by performing the esterification reaction for 4 h, with 1:1 molar ratio (dodecanol:FFA), and 5 % (w/w) Candida rugosa lipase as biocatalyst. It was observed that SDA was concentrated in the unesterified fraction.     

Bright two-photon emission and ultra-fast relaxation dynamics in a DNA-templated nanocluster investigated by ultra-fast spectroscopy

Metal nanoclusters have interesting steady state fluorescence emission, two-photon excited emission and ultrafast dynamics. A new subclass of fluorescent silver nanoclusters (Ag NCs) are NanoCluster Beacons. NanoCluster Beacons consist of a weakly emissive Ag NC templated on a single stranded DNA ("Ag NC on ssDNA") that becomes highly fluorescent when a DNA enhancer sequence is brought in proximity to the Ag NC by DNA base pairing ("Ag NC on dsDNA"). Steady state fluorescence was observed at 540 nm for both Ag NC on ssDNA and dsDNA; emission at 650 nm is observed for Ag NC on dsDNA. The emission at 550 nm is eight times weaker than that at 650 nm. Fluorescence up-conversion was used to study the dynamics of the emission. Bi-exponential fluorescence decay was recorded at 550 nm with lifetimes of 1 ps and 17 ps. The emission at 650 nm was not observed at the time scale investigated but has been reported to have a lifetime of 3.48 ns. Two-photon excited fluorescence was detected for Ag NC on dsDNA at 630 nm when excited at 800 nm. The two-photon absorption cross-section was calculated to be ～3000 GM. Femtosecond transient absorption experiments were performed to investigate the excited state dynamics of DNA-Ag NC. An excited state unique to Ag NC on dsDNA was identified at ～580 nm as an excited state bleach that related directly to the emission at 650 nm based on the excitation spectrum. Based on the optical results, a simple four level system is used to describe the emission mechanism for Ag NC on dsDNA.     

Overlapping with Jack Dunitz

The starting point was an overlap with Jack Dunitz in studies on the preferred conformation of the carboxyl group in saturated and unsaturated acids, esters and amides, orientational disorder of the hydrogen-bonded carboxylic acid dimer in benzoic acid crystal structures, and intramolecular lone pair-lone pair repulsion between oxygen atoms. The journey described here outlines a search to establish the existence of C−H⋅⋅⋅O hydrogen bonds and engineering cocrystals that incorporate intermolecular lone pair-lone pair repulsion between oxygen atoms.     

The Critical Role of Passive Permeability in Designing Successful Drugs

Passive permeability is a key property in drug disposition and delivery. It is critical for gastrointestinal absorption, brain penetration, renal reabsorption, defining clearance mechanisms and drug-drug interactions. Passive diffusion rate is translatable across tissues and animal species, while the extent of absorption is dependent on drug properties, as well as in vivo physiology/pathophysiology. Design principles have been developed to guide medicinal chemistry to enhance absorption, which combine the balance of aqueous solubility, permeability and the sometimes unfavorable compound characteristic demanded by the target. Permeability assays have been implemented that enable rapid development of structure-permeability relationships for absorption improvement. Future advances in assay development to reduce nonspecific binding and improve mass balance will enable more accurately measurement of passive permeability. Design principles that integrate potency, selectivity, passive permeability and other ADMET properties facilitate rapid advancement of successful drug candidates to patients.     

A description of phase inversion behaviour in agitated liquid-liquid dispersions under the influence of the Marangoni effect

The influence of the Marangoni effect on phase inversion behaviour is examined by integrating a microscopic study of the drop coalescence process, in which thin film drainage in the presence of insoluble surfactant occurs, into a macroscopic phase inversion model which has been developed previously using a Monte Carlo technique. This is achieved via an immobility factor, obtained from a comparison of the film drainage times for surfactant-laden systems and surfactant-free systems as a function of the drop approach velocity, surface Péclet number, initial surfactant concentration and the Hamaker constant, which is then used to modify the coalescence probability in the phase inversion model. On the one hand, the results indicate that the Marangoni effect removes any influence that the viscosity ratio has on phase inversion due to immobilisation of the interface, thus shielding the flow in the film from the effects of the flow in the dispersed phase; the point at which phase inversion occurs therefore tends towards equivolume holdups with the addition of surfactant. On the other hand, when comparisons are made with pure systems in which surfactant is absent, the system is seen to be either stabilised or de-stabilised from inversion depending on the viscosity ratio of the system. This is attributed to the influence of surfactant on the dispersion morphologies on either side of the inversion (i.e. water-in-oil dispersions and oil-in-water dispersions) and depends on the dispersed phase holdup; the Marangoni effect is felt stronger when the dispersed phase holdup is low.     

Barrier Layer Capacitor Using Barium Bismuth Plumbate and Barium Plumbate

A new type of barrier layer capacitor is described utilizing thin glass layers on highly conducting ceramics of barium plumbate and barium bismuth plumbate. The frequency dispersion of the apparent dielectric constant has been explained using a modified version of the Maxwell–Wagner model. These capacitors have a low temperature coefficient of capacitance and a high dispersion frequency in the megahertz range. Simple processing conditions together with low firing temperature make it possible to produce the barrier layer capacitors inexpensively.     

Formation of bed agglomeration in a fluidized multi-waste incinerator

A case study was carried out to investigate the bed agglomeration observed in a fluidized bed incinerator when burning blends of three wastes (carbon soot, biosludge and fuel oil). Several instrumental approaches were employed (i.e. XRF, SEM, XRD, and ICP-AES) to identify the bed materials (fresh sand and degrader sand) and clinkers formed in the full-scale incinerator tests. Several elements (V, Al, S, Na, Fe, Ni, P, and Cl), which normally are associated with the formation of low melting point compounds, were found in the waste blends at high content levels. The clinker bridges were identified to be associated with Al, Fe, V, K, Na, S, Ni, and Si elements.The effects of temperature and blending ratio were investigated in a muffle furnace. Carbon soot is believed to be more susceptible to the clinker formation than the other two fuels. Thermodynamic multi-phase multi-component equilibrium calculations predict that the main low melting point species could be Al₂(SO₄)₃, Fe₂(SO₄)₃, Na₂SO₄, NaCl, Na₂SiO₃ and V₂O₅. This information is useful to understand the chemistry of clinker formation. Also, it helps to develop methods for the control and possible elimination of the agglomeration problem for the design fuels.