Semi‐volatile organic compounds in the air and dust of 30 French schools: a pilot study

The contamination of indoor environments with chemical compounds released by materials and furniture, such as semi‐volatile organic compounds (SVOCs), is less documented in schools than in dwellings—yet children spend 16% of their time in schools, where they can also be exposed. This study is one of the first to describe the contamination of the air and dust of 90 classrooms from 30 nursery and primary schools by 55 SVOCs, including pesticides, phosphoric esters, musks, polycyclic aromatic hydrocarbons (PAHs), polychlorobiphenyls (PCBs), phthalates, and polybromodiphenylethers (PBDEs). Air samples were collected using an active sampling method, and dust samples were collected via two sampling methods (wiping and vacuum cleaning). In air, the highest concentrations (median >100 ng/m³) were measured for diisobutyl phthalate (DiBP), dibutyl phthalate (DBP), diethyl phthalate (DEP), bis(2‐ethylhexyl) phthalate (DEHP), and galaxolide. In dust, the highest concentrations (median >30 μg/g) were found for DEHP, diisononyl phthalate (DiNP), DiBP, and DBP. An attempt to compare two floor dust sampling methods using a single unit (ng/m²) was carried out. SVOC concentrations were higher in wiped dust, but frequencies of quantification were greater in vacuumed dust.     

Removal of heavy metals from waters by means of natural zeolites

The natural zeolite clinoptilolite can be used as an ion exchanger for the removal of ammonium ions from drinking waters. These waters may also contain small amounts of heavy metals. The retention possibilities of these cations by the zeolite are presented.

The study of the selectivity of the Na-exchanged clinoptilolite in presence of ammonium ions has been achieved by plotting the exchange isotherms relative to the various cations. This leads to the following order of decreasing efficiency of the zeolite.     

Comparing Al-SBA-15 Support and Pt/Al-SBA-15 Catalyst: Changes in Al Speciation and Acidic Properties Induced by the Introduction of Pt via Aqueous Medium

Differences between the acidic properties of silicoaluminic Pt-containing catalysts and those assessed on their parent supports have been reported in the literature and attributed to the presence of the metal nanoparticles and to their influence on the acid sites. It is shown here that for mesoporous materials containing various types of Al species, an alternative explanation can be proposed. ²⁷Al NMR spectroscopy, FTIR of adsorbed CO and probe catalytic tests suggest the redistribution of aluminium atoms upon contact of the parent support with the aqueous solution containing the Pt precursor. Upon contact with water and thermal treatment, strong and mild Brønsted sites (Si–O(H)–Al) transform into strong Lewis sites (isolated tetracoordinated Al atoms). As a consequence, it may not be straightforward to deduce the acidic properties of metal-containing catalysts supported on Al-containing mesoporous materials from those of the bare support, because the surface species may differ significantly.     

Passive and active air samplers as complementary methods for investigating persistent organic pollutants in the Great Lakes Basin

Data obtained using passive air samplers (PAS) are compared to active high-volume air sampling data in order to assess the feasibility of the PAS as a method, complementary to active high-volume air sampling (AAS), for monitoring levels of organochlorine (OC) pesticides, polychlorinated biphenyls (PCBs), and polybrominated diphenyl ethers (PBDEs) in the Laurentian Great Lakes. PAS were deployed at 15 of the Integrated Atmospheric Deposition Network (IADN) sites on a quarterly basis between July 2002 and June 2003, and PAS and AAS results are compared. Levels for the OC pesticides are typically highest in agricultural areas, with endosulfan I dominating air concentrations with values ranging between 40 and 1090 pg x m(-3), dieldrin values between 15 and 165 pg x m(-3), and gamma-HCH values between 13 and 100 pg x m(-3). alpha-HCH was seen to be relatively uniform across the Great Lakes Basin with values ranging between 15 and 73 pg x m(-3). Large urban centers, such as Chicago and Toronto, have the highest levels of PCBs and PBDEs that range between 400 and 1200 pg x m(-3) and 10 and 70 pg x m(-3), respectively. Comparison of the AAS and the PAS data collected during this study shows good agreement, within a factor of 2 or 3, suggesting that the two sample methods produce comparable results. It is suggested that PAS networks, while providing data that are different in nature from AAS, can provide a cost-effective and complementary approach for monitoring the spatial and temporal trends of persistent organic pollutants.     

Selectivity of high surface area Ce0.68Zr0.32O2 for the new generation of TWC under environments with different redox character

A number of experiments were carried out with fresh and aged high surface area Ce_0.68Zr_0.32O₂ mixed oxide samples with complex feed-streams in order to determine their performance as three way catalyst (TWC). The results confirmed the oxygen storage capacity (OSC) of these samples, which favour NO conversion in cycled versus stationary stoichiometric operation. Several experiments carried out with different feed-streams have shown that a pre-reducing treatment can significantly improve both NO reduction at low-temperature and selectivity to N₂, which can be very useful to reduce the emission of nitrogen oxides immediately after starting the automobile. Although a significant reduction of the specific surface area of the mixed oxide takes place during ageing at 1173 K, it has been shown that the performance of the sample remains similar or even better than when fresh, due to an increased OSC. Thus, the reduction of CO and hydrocarbon emissions during start could be achieved by situating the catalytic converter nearer the exhaust to the engine, where the catalyst will be heated faster.     

Flow Properties of Tailored Net-Shape Thermoplastic Composite Preforms

A novel thermoplastic programmable preforming process, TP-P4, has been used to manufacture preforms for non-isothermal compression molding. Commingled glass and polypropylene yarns are deposited by robot onto a vacuum screen, followed by a heat-setting operation to stabilize the as-placed yarns for subsequent handling. After an optional additional preconsolidation stage, the preforms are molded by preheating and subsequent press forming in a shear edge tool. The in- and out-of-plane flow capabilities of the material were investigated, and compared to those of 40 _wt% Glass Mat Thermoplastics (GMTs). Although the TP-P4 material has a fiber fraction of 60 _wt%, the material could be processed to fill 77 mm deep ribs with a thickness of 3 mm, indicative of complex part production. The pressure requirements for out-of-plane flow were shown to depend on the fiber length and fiber alignment. Segregation phenomena were found to be less severe with TP-P4 than with GMT material.     

Spark Plasma Sintering of fine alpha-silicon nitride ceramics with LAS for spatial applications

Many space systems such as satellite mirrors and their supporting structures require to be made from very low-thermal expansion materials combining both high hydrostability and relatively high mechanical properties. In this study, we have applied the “composite concept” in order to explore the possibility of fabricating near zero thermal expansion silicon nitride based ceramics. Consequently, a negative thermal expansion material belonged to the lithium aluminosilicate family (LAS powder crystallized under de β-eucryptite structure) was introduced in an alpha-silicon nitride fine powder (5 and 20 vol% of LAS) and the resulting composite system was sintered by Spark Plasma Sintering (SPS) at 1400 and 1500 °C. In the case of 20 vol% LAS compositions, relatively well-densified ceramics (94.4% of the theoretical density) were produced without adding any further sintering additive. The addition of yttria and alumina oxides allowed enhancing the densification level up to 98.2% (20 vol% LAS compositions) or from 62.3% up to 96.7% of the theoretical density in 5 vol% LAS materials. Nevertheless, it was impossible to full consolidate silicon nitride/LAS composite ceramics at temperatures lower than the temperature at which β-eucryptite melts, even by using SPS technology. Moreover, because of the relatively low temperatures involved in SPS, the α to β-Si₃N₄ transformation was avoided, resulting in microstructures composed of fine equiaxed α-Si₃N₄ grains (<200 nm) and of a glassy phase. Even if the effect of having a very large negative thermal expansion material was lost during the sintering step (because of the β-eucryptite melting), ceramics containing only 20 vol% of LAS-based phase exhibited very interesting values as regards of mechanical properties (strength, hardness, toughness, and Young's modulus), thermal conductivity and thermal expansion coefficient. We discuss in this work why we are so interested in developing dense silicon nitride/LAS ceramics sintered without any further additive addition, even though β-eucryptite is melted during the process and the transformation to the β phase is avoided.     

Fatal G-CSF-induced pulmonary toxicity

Inherited thrombophilia has been suggested as a cause of Legg-Calvé-Perthes disease in up to 75% of patients. This prevalence seems high compared to the prevalence of inherited thrombophilia in other thrombotic disorders (average, 30%). Therefore, we investigated 44 patients with Legg-Calvé-Perthes disease for antithrombin-III, protein-C, and protein-S deficiency and activated protein C (APC) resistance. Three (6.8%) of our patients were positive for APC resistance, and one patient (2.2%) showed deficiency of protein-C activity. Our results suggest that inherited thrombophilia is not associated with avascular necrosis of the femoral head (Legg-Calvé-Perthes disease).