Lipase-catalyzed process in an anhydrous medium with enzyme reutilization to produce biodiesel with low acid value

One major problem in the lipase-catalyzed production of biodiesel or fatty acid methyl esters (FAME) is the high acidity of the product, mainly caused by water presence, which produces parallel hydrolysis and esterification reactions instead of transesterification to FAME. Therefore, the use of reaction medium in absence of water (anhydrous medium) was investigated in a lipase-catalyzed process to improve FAME yield and final product quality. FAME production catalyzed by Novozym 435 was carried out using waste frying oil (WFO) as raw material, methanol as acyl acceptor, and 3 Å molecular sieves to extract the water. The anhydrous conditions allowed the esterification of free fatty acids (FFA) from feedstock at the initial reaction time. However, after the initial esterification process, water absence avoided the consecutives reactions of hydrolysis and esterification, producing FAME mainly by transesterification. Using this anhydrous medium, a decreasing in both the acid value and the diglycerides content in the product were observed, simultaneously improving FAME yield. Enzyme reuse in the anhydrous medium was also studied. The use of the moderate polar solvent tert-butanol as a co-solvent led to a stable catalysis using Novozym 435 even after 17 successive cycles of FAME production under anhydrous conditions. These results indicate that a lipase-catalyzed process in an anhydrous medium coupled with enzyme reuse would be suitable for biodiesel production, promoting the use of oils of different origin as raw materials.     

Cloning of the bile salt hydrolase (bsh) gene from Enterococcus faecium FAIR-E 345 and chromosomal location of bsh genes in food enterococci

Enterococcus faecium strain FAIR-E 345 isolated from food was shown to possess bile salt hydrolase (Bsh) activity in a plate screening assay and by high-performance liquid chromatography analysis. The bsh gene was cloned and sequenced. DNA sequence analysis revealed that it encoded a protein of 324 amino acids, with pI 4.877. A bsh gene probe was prepared from the cloned bsh gene and was used for probing plasmid and total genomic DNA of Bsh-positive enterococci isolated from food to determine the genomic location of their bsh genes. This probe was able to detect the bsh gene among total genomic DNA preparations but not from plasmid preparations of 10 plasmid-bearing Enterococcus strains. However, the probe could detect the bsh gene from total genomic DNA preparations of 12 Enterococcus strains that did not contain detectable plasmid DNA. In no cases did the probe hybridize with plasmid DNA preparations, suggesting that the bsh gene among enterococci is probably generally chromosomally encoded. This presumptive chromosomal location of bsh genes among food enterococci suggests that transfer of this trait by conjugative plasmids is unlikely.     

Development of organosilicone–polyurethanes as stone preservation and consolidation materials

Two organosilicone-modified polyurethanes are investigated as potential materials for the conservation and consolidation of natural stones. The materials are low molecular weight oligomers at the application stage and react with the humidity of the air to give polymers, forming continuous microlayers. The two differ in the length of the organosilicone chain, resulting in pronounced differences in their physical state: one forms a brittle glassy material (T_g ≈ 70°C). and the other, a soft rubbery material (T_g ≈ −100°C). The rate of the polymerization of the prepolymers was investigated at different conditions, showing a strong dependence on the presence of a catalyst and air humidity. Both these favorable conditions exist probably in the natural stone pores, enhancing the formation of the protective hydrophobic internal microlayer. © 1996 John Wiley & Sons, Inc.     

Flavine und Zimtsäurederivat im Zusammenhang mit der lichtinduzierten Blattöffnung bei Albizia julibrissin

Flavins and Chinamoyl Derivatives in Relation to the Light-induced Leaf Opening in Albizia julibrissin In search of blue-light photoreceptors for light-induced leaf opening we isolated from the aqueous extract of Albizia julibrissin Durazz. two flavins by adsorption on XAD-4 and separation with HPLC. One sample was identified as riboflavin 1a. In the hydrolysate of the second flavin fraction we found another dimethylisoalloxazine with a C₅-side chain. Furthermore we isolated the cinnamoyl derivatives 3-O-(4-hydroxy-trans-cinnamoyl) quinic acid 2 and 3-O-(3,4-dihydroxy-trans-cinnamoyl)-4-O-malonyl-quinic acid 3 which formed charge transfer complexes with the flavins in the XAD-fraction. As a model complex we examined the absorption behaviour of the complex between riboflavin and chlorogenic acid. Using the association constant, we calculated the absorption spectrum and could show that a complex between a flavin and a phenolic compound is a possible blue-light photoreceptor for the light-induced leaf opening in Albizia julibrissin.     

Influence of Methanol on Prion Reduction during High Temperature and High Pressure Oleochemical Processes

Prion‐reduction in standard biodiesel processes is caused by acidic and alkaline conditions. In the alternative RepCat biodiesel process, efficient prion‐reduction can be achieved by high‐temperature/pressure. However, a possible increase in thermostability of prions in the presence of methanol during these conditions has not previously been investigated, and is verified in this work. Samples are spiked with prions, treated with methanol, and incubated at 220 °C at 80 bar for 30 min. No traces of protease‐resistant prion protein (as proxy for prions) are detected in tallow or glycerine (as the final by‐product) after treatment. Serial dilutions of spiked prions show at least 6 log₁₀ prion reduction. More importantly, similar effects are detected using milder conditions of 200 °C at 70 bar for 15 min, representing the worst‐case conditions of the process. In conclusion, this study shows that methanol does not increase the thermostability of prions and the RepCat process can efficiently eliminate prions and is therefore safe for the usage of category 1 tallow. Practical Applications: The study further supports the applicability of RepCat process in reducing prion‐contamination in the presence of methanol. Furthermore, the conditions leads to a considerable reduction of prions in glycerine obtained as by‐product.     

Fluoroaluminate induces activation and association of Src and Pyk2 tyrosine kinases in osteoblastic MC3T3-E1 cells

Fluoride is known to increase bone mass in vivo, probably through stimulation of osteoblast proliferation; however, the mechanisms of fluoroaluminate action in osteoblasts have not yet been elucidated. We have previously shown that in osteoblastic MC3T3-E1 cells, fluoroaluminate stimulates G protein-mediated protein tyrosine phosphorylation (Scaronuscarona, M., Standke, G. J. R., Jeschke, M., and Rohner, D. (1997) Biochem. Biophys. Res. Commun. 235, 680-684). Although the Ser/Thr kinases Erk1, Erk2, and p70(S6K) were activated in response to fluoroaluminate, the identity of fluoroaluminate-activated tyrosine kinase(s) remained elusive. In this study, we show that in MC3T3-E1 cells, fluoroaluminate induces a 110-kDa tyrosine-phosphorylated protein that we identify as Pyk2, a cytoplasmic tyrosine kinase related to Fak (focal adhesion kinase). The tyrosine phosphorylation of Pyk2 increased in a dose- and time-dependent manner. The autophosphorylation activity of Pyk2 increased 3-fold and reached its maximum within 10 min of fluoroaluminate treatment. Fluoroaluminate also induced activation of Src and the association of Pyk2 with Src. The phosphorylation of Src-associated Pyk2 increased >20-fold in in vitro kinase assays, suggesting that Pyk2 is phosphorylated by Src. Although MC3T3-E1 cells express much more Fak than Pyk2, Src preferentially associated with Pyk2. In vitro, Pyk2 bound to the Src SH2 domain, suggesting that this interaction mediates the Src-Pyk2 association in cells. These data indicate that osteoblastic cells express Pyk2, which is tyrosine-phosphorylated and activated in response to G protein activation by fluoroaluminate, and that the mechanism of Pyk2 activation most likely involves Src. Thus, Src and Pyk2 are tyrosine kinases involved in G protein-mediated tyrosine phosphorylation in osteoblastic cells and may be important for the osteogenic action of fluoroaluminate.     

Expression of genes encoding the E2 and E3 components of the Bacillus stearothermophilus pyruvate dehydrogenase complex and the stoichiometry of subunit interaction in assembly in vitro

Genes encoding the dihydrolipoyl acetyltransferase (E2) and dihydrolipoyl dehydrogenase (E3) components of the pyruvate dehydrogenase (PDH) multienzyme complex from Bacillus stearothermophilus were overexpressed in Escherichia coli. The E2 component was purified as a large soluble aggregate (molecular mass > 1 x 10(6) Da) with the characteristic 532 symmetry of an icosahedral (60-mer) structure, and the E3 as a homodimer with a molecular mass of 110 kDa. The recombinant E2 component in vitro was capable of binding either 60 E3(alpha2) dimers or 60 heterotetramers (alpha2beta2) of the pyruvate decarboxylase (E1) component (also the product of B. stearothermophilus genes overexpressed in E. coli). Assembling the E2 polypeptide chain into the icosahedral E2 core did not impose any restriction on the binding of E1 or E3 to the peripheral subunit-binding domain in each E2 chain. This has important consequences for the stoichiometry of the assembled complex in vivo. The lipoyl domain of the recombinant E2 protein was found to be unlipoylated, but it could be correctly post-translationally modified in vitro using a recombinant lipoate protein ligase from E. coli. The lipoylated E2 component was able to bind recombinant E1 and E3 components in vitro to generate a PDH complex with a catalytic activity comparable with that of the wild-type enzyme. Reversible unfolding of the recombinant E2 and E3 components in 6 M guanidine hydrochloride was possible in the absence of chaperonins, with recoveries of enzymic activities of 95% and 85%, respectively. However, only 26% of the E1 enzyme activity was recovered under the same conditions as a result of irreversible denaturation of both E1alpha and E1beta. This represents the first complete post-translational modification and assembly of a fully active PDH complex from recombinant proteins in vitro.     

Electrical impedance tomography with compensation for electrode positioning variations

Ideally electrical impedance tomography (EIT) should not be oversensitive to electrode positions, but this conflicts with efforts to produce high-resolution images. Two procedures are presented that balance reducing the sensitivity to electrode position errors with generating practicable EIT images. The first provides a criterion based on electrode sensitivity for regularizing the reconstruction through spectral expansion. The main consequences of this are that smoother images are produced and the number of artefacts and their magnitude are generally reduced. The second modification uses the recorded data to compensate for electrode movements that have occurred after the reference data were measured. Image smoothness is used as the criterion for the readjustment. Computer simulation tests have shown that this modification produces improved image fidelity.