Coming to terms with OBRA

The Omnibus Budget Reconcilitation Act of 1987 contains sweeping changes in nursing home regulations aimed at improving residents' quality of life. However, implementing these rules in today's economy has operators of even well-managed nursing homes worried. Here's why.     

Annealing effects on the structure and hardness of helium-irradiated Cr2AlC thin films

Cr₂AlC MAX phase thin films prepared by radio-frequency magnetron sputtering were irradiated at room temperature by 100 keV helium ions to a fluence of 1 × 10¹⁷ ions cm⁻². The effects of thermal annealing on the structural and mechanical properties of the helium-irradiated Cr₂AlC films as well as the helium release were investigated by grazing-incidence X-ray diffraction (GIXRD), Raman spectroscopy, and scanning electron microscope (SEM) in combination with nano-indentation and elastic recoil detection (ERD) analysis. The irradiation-induced structural damage in the Cr₂AlC is significantly recovered by thermal annealing at temperatures around 600℃, attributed to high defect diffusivity. After annealing to 750℃, the hardness of irradiated films recovered almost completely, which is ascribes to both defect recombination and reformation of damaged chemical bonds. Substantial helium release occurring at this annealing temperature is closely related to the damage recovery due to helium irradiation.     

An Integrated Model of the Toyota Production System with Total Quality Management and People Factors

The Toyota production system (TPS), or lean production, has been associated with many benefits for manufacturing firms that implement the system. However, to implement the TPS successfully, it is necessary to integrate the so‐called “hard side” of the system (that is, the technical aspects of material handling) with the “soft side” of the program (that is, the aspects associated with human factors). The present study makes a contribution to such a holistic view of the TPS by proposing an integrated model that consists of the technical aspects of the TPS, together with elements associated with total quality management (TQM), human resources management (HRM), and certain identified “people factors.” The study then uses structural equation modeling (SEM) to test this holistic model using data obtained from a questionnaire survey of 153 Taiwanese manufacturing firms. The empirical study confirms the appropriateness of the causal model, which is evaluated by several goodness‐of‐fit methods. The study confirms the proposition that the inclusion of the “people factors” together with TQM and HRM significantly improves the realization of benefits associated with the TPS practices of “just‐in‐time” (JIT) and “autonomation.” The conclusion is that such an integrated model provides a much more effective “lean system” and has the potential to produce significantly enhanced benefits for firms that implement it. © 2012 Wiley Periodicals, Inc.     

Automated interpretation and accessible presentation of technical diagrams for blind people

The EU-supported TeDUB (Technical Drawings Understanding for the Blind) project is developing a software system that aims to make technical diagrams accessible to blind and visually impaired people. It consists of two separate modules: one that analyses drawings either semi-automatically or automatically, and one that presents the results of this analysis to blind people and allows them to interact with it. The system is capable of analysing and presenting diagrams from a number of formally defined domains. A diagram enters the system as one of two types: first, diagrams contained in bitmap images, which do not explicitly contain the semantic structure of their content and thus have to be interpreted by the system, and second, diagrams obtained in a semantically enriched format that already yields this structure. The TeDUB system provides blind users with an interface to navigate and annotate these diagrams using a number of input and output devices. Extensive user evaluations have been carried out and an overall positive response from the participants has shown the effectiveness of the approach.     

The effect of piezoresistive microcantilever geometry on cantilever sensitivity during surface stress chemical sensing

We have designed, fabricated, and tested five piezoresistive cantilever configurations to investigate the effect of shape and piezoresistor placement on the sensitivity of microcantilevers under both point loading and surface stress loading. The experimental study reveals that: (1) high aspect ratio cantilevers that are much longer than they are wide are optimal for point-loading applications such as microscopy and force measurements; (2) low aspect ratio cantilevers that are short and wide are optimal for surface stress-loading scenarios such as those that occur in biological and chemical sensor applications. The sensitivity data for both point loads and surface stress are consistent with previously developed finite-element models.     

Estimating storm discharge and water quality data uncertainty: A software tool for monitoring and modeling applications

Uncertainty estimates corresponding to measured hydrologic and water quality data can contribute to improved monitoring design, decision-making, model application, and regulatory formulation. With these benefits in mind, the Data Uncertainty Estimation Tool for Hydrology and Water Quality (DUET-H/WQ) was developed from an existing uncertainty estimation framework for small watershed discharge, sediment, and N and P data. Both the software and its framework-basis utilize the root mean square error propagation methodology to provide uncertainty estimates instead of more rigorous approaches requiring detailed statistical information, which is rarely available. DUET-H/WQ lists published uncertainty information for data collection procedures to assist the user in assigning appropriate data-specific uncertainty estimates and then calculates the uncertainty for individual discharge, concentration, and load values. Results of DUET-H/WQ application in several studies indicated that substantial uncertainty can be contributed by each procedural category (discharge measurement, sample collection, sample preservation/storage, laboratory analysis, and data processing and management). For storm loads, the uncertainty was typically least for discharge (±7–23%), greater for sediment (±16–27%) and dissolved N and P (±14–31%) loads, and greater yet for total N and P (±18–36%). When these uncertainty estimates for individual values were aggregated within study periods (i.e. total discharge, average concentration, and total load), uncertainties followed the same pattern (Q < TSS < dissolved N and P < total N and P). This rigorous demonstration of uncertainty in discharge and water quality data illustrates the importance of uncertainty analysis and the need for appropriate tools. It is our hope that DUET-H/WQ contributes to making uncertainty estimation a routine data collection and reporting procedure and thus enhances environmental monitoring, modeling, and decision-making. Hydrologic and water quality data are too important for scientists to continue to ignore the inherent uncertainty.     

Comparison of the ageing behaviour of PM 2124 Al alloy and Al-SiCp metal-matrix composite

The ageing response of 2124 Al-SiC particulate metal-matrix composite (MMC) and unreinforced alloy has been examined using hardness measurements and Arrhenius analysis. The formation of phases during precipitation has been studied using differential scanning calorimetry (DSC). The MMC exhibits accelerated ageing compared to unreinforced alloy, due to enhanced S formation. The activation energy for diffusion is lower in the MMC than in the unreinforced alloy. DSC scans show Guinier-Preston B (GPB) zone nucleation to occur at a lower temperature in the MMC, whilst the total volume of GPB zones formed is smaller than in the unreinforced alloy. A model has been proposed to explain the GPB zone formation behaviour, in which ease of GPB zone nucleation varies within the MMC, as a function of ageing time and of position within the matrix. S formation is enhanced in the MMC because of improved diffusion and a large increase in density of heterogeneous nucleation sites compared to the unreinforced alloy.     

Noniterative compensation for the distance-dependent detector response and photon attenuation in SPECT imaging

A filtering approach is described, which accurately compensates for the 2D distance-dependent detector response, as well as for photon attenuation in a uniform attenuating medium. The filtering method is based on the frequency distance principle (FDP) which states that points in the object at a specific source-to-detector distance provide the most significant contribution to specified frequency regions in the discrete Fourier transform (DFT) of the sinogram. By modeling the detector point spread function as a 2D Gaussian function whose width is dependent on the source-to-detector distance, a spatially variant inverse filter can be computed and applied to the 3D DFT of the set of all sinogram slices. To minimize noise amplification the inverse filter is rolled off at high frequencies by using a previously published Wiener filter strategy. Attenuation compensation is performed with Bellini's method. It was observed that the tomographic point response, after distance-dependent filtering with the FDP, was approximately isotropic and varied substantially less with position than that obtained with other correction methods. Furthermore, it was shown that processing with this filtering technique provides reconstructions with minimal degradation in image fidelity.