Experimental study and numerical modeling of mixing by air injection in yield stress fluids using the OpenFOAM software

Mixing by gas injection is an operation used in industrial processes such as wastewater treatment, metallurgy, or methanization in which pressurized gas is injected into a fluid in order to reduce concentrations and temperatures gradients. This study demonstrates how the CFD toolbox OpenFOAM can be used to simulate such flows. Experimental measurements and observations have been performed on a pilot-scale reactor where pressurized air is injected in a yield stress fluid. The volume of fluid method and an adaptive mesh with refinement at the interface have been used to track the gas inclusions. The numerical model accuracy has been assessed by comparing experimental and numerical results related to the bubble's frequency, dimensions, and rising velocities as well as the fluid recirculation, yielded, and unyielded regions in the tank. The influence of injection parameters such as the injection flow rate and the fluid rheological parameters has been quantified.     

Palladium‐Catalyzed [2+1] Cycloadditions Affording Vinylidenecyclopropanes as Precursors of 7‐Membered Carbocycles

Palladium(II) acetate in association with secondary phosphine oxides provides an efficient catalytic system for [2+1] cycloadditions starting from oxanorbornene derivatives and tertiary propargyl esters giving rise to vinylidenecyclopropanes. This reaction is specific to bidentate phosphinito–phosphinous acid ligands generated from secondary phosphine oxides. The [2+1] cycloaddition was found broad in scope with a high tolerance to various functional groups. Moreover, vinylidenecyclopropanes were straightforwardly converted into oxabicyclo[3.2.1]oct‐2‐ene derivatives through a palladium‐catalyzed ring‐expansion. Finally, the oxa bridge cleavage of oxatricyclic compounds yields functionalized 7‐membered carbocycles.

     

Irreversible changes in protein conformation due to interaction with superparamagnetic iron oxide nanoparticles

The understanding of the interactions between nanomaterials and proteins is of extreme importance in medicine. In a biological fluid, proteins can adsorb and associate with nanoparticles, which can have significant impact on the biological behavior of the proteins and the nanoparticles. We report here on the interactions of iron saturated human transferrin protein with both bare and polyvinyl alcohol coated superparamagnetic iron oxide nanoparticles (SPIONs). The exposure of human transferrin to SPIONs results in the release of iron, which changes the main function of the protein, which is the transport of iron among cells. After removal of the magnetic nanoparticles, the original protein conformation is not recovered, indicating irreversible changes in transferrin conformation: from a compact to an open structure.     

Thermal and mechanical properties of polypropylene/wood‐flour composites

In this research, polypropylene/wood‐flour composites (WPCs) were blended with different contents of wood and/or maleated polypropylene (MAPP) and clay. We found that the addition of MAPP or clay in the formulation greatly improved the dispersion of the wood fibers in the composite; this suggested that MAPP or clay may have played the role of an adhesion promoter in the WPCs. The results obtained with clay indicate that it also acted as a flame retardant. The thermal tests carried out with the produced samples showed an increased crystallization temperature (T_c), crystallinity, and melting temperature (T_m) with wood loading. The increase of the two former parameters was explained by the incorporation of wood flour, which played the role of nucleating agent and induced the crystallization of the matrix polymer. On the other hand, the T_m increase was ascribed to the insulating properties of wood, which hindered the movement of heat conduction. The effects of UV irradiation on T_m and T_c were also examined. T_c increased with UV exposure time; this implied that UV degradation generated short chains with low molecular weight that could move easily in the bulk of the sample and, thus, catalyze early crystallization. The flexural strength and modulus increased with increasing wood‐flour content. In contrast, the impact strength and tensile strength and strain decreased with increasing wood‐flour content. All of these changes were related to the level of dispersion of the wood flour in the polymeric matrix. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Synthesis and Surface-Active Properties of Uronic Amide Derivatives,Surfactants from Renewable Organic Raw Materials

Short chemical syntheses were developed to produce a new set of surfactants from uronic acids derived from widely available raw materials. Three different strategies were used to synthesize uronic amide derivatives, the structures of which were totally characterized by spectrometric methods (IR, MS, ¹H-RMN and ¹³C-RMN). The best one, using an acid chloride as the synthetic intermediate, furnished the expected amides as a mixture of anomers in 46–58% global yield. Surface-active properties (CMC, γ_cmc, Γ_max, A _min) of homologous series of uronic acid N-alkylamides from C8 to C18 were also assessed. In general, these sugar-based surfactants exhibited good surface-activities, and appeared as valuable nonionic surfactants compared to octylphenol 9–10 ethylene oxide condensate, the most well-known nonionic surfactant. Increasing the alkyl chain length influenced the CMC values for both glucuronic and galacturonic N-alkylamide derivatives. The galacturonic N-alkylamides decreased γ_cmc at slower values than their counterpart’s glucuronic N-alkylamides.     

Ring‐opening bulk polymerization of five‐ and six‐membered cyclic phosphonates using maghnite,a nontoxic proton exchanged montmorillonite clay

A new method of preparation of poly(alkylene H‐phosphonate)s by ring‐opening bulk polymerization of the five‐ and six‐membered cyclic phosphonates monomers using the nontoxic Maghnite‐H⁺ as the initiator is described. Cyclic phosphonate monomers have been first synthesized. In particular, a new one‐step synthesis of 2‐hydro‐2‐oxo‐1,3,2‐dioxaphospholane is reported with a yield of 70%. The efficiency of the montmorillonite sheet silicate clay which exchanged with protons, called Maghnite‐H⁺, as cationic initiator has been proved and the resulting biomimetic poly(alkylene H‐phosphonate)s have been characterized. The Maghnite‐H⁺ regenerated after one turn‐over has showed to be still efficient as initiator for the ring‐opening polymerization. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Poly(L‐lactic acid) with added α‐tocopherol and resveratrol: optical,physical, thermal and mechanical properties

Poly(L ‐lactic acid) (PLLA) films containing various concentrations of two natural antioxidants, α‐tocopherol and resveratrol, were fabricated by a melt compounding and compression molding process. The influence of the antioxidants on the optical properties such as color and UV‐visible light transmission was analyzed. The thermal, mechanical, rheological and physical properties of PLLA films with added antioxidants were assessed. PLLA films with added α‐tocopherol and resveratrol showed a yellowish brown color and the lightness was influenced by the presence of the antioxidants. The glass transition and melting temperatures were significantly reduced with the addition of antioxidants while enhanced thermal stability was observed, which could be a benefit and important for processing and production. PLLA films with added antioxidants were slightly more hydrophobic than neat PLLA. The combination effect of plasticizing and enhancement of the elastic modulus with differing concentrations of two antioxidants played a critical role in the mechanical and thermomechanical properties of PLLA films. The melt viscosity of the PLLA films with added antioxidants was substantially higher than that of neat PLLA. The higher melt viscosity and G′(ω) could be an indication of formation of entanglement between PLLA and the two antioxidants. Copyright © 2012 Society of Chemical Industry     

Structural evolution at short and medium range distances during crystallization of a P2O5-Li2O-Al2O3-SiO2 glass

Li₂O-Al₂O₃-SiO₂ (LAS) glass-ceramics have important industrial applications and bulk nucleation is usually achieved by using nucleating agents. In particular, P₂O₅ is an efficient agent in glasses containing a low level of Al₂O₃ but its role in the first stages of nucleation is not well established. In this study, we combine structural investigations from local to mesoscales to describe the structural evolution during crystallization of LAS glass-ceramics. Local environment is probed using ²⁹Si and ³¹P MAS-NMR, indicating organization of P in poorly crystallized Li₃PO₄ species prior to any crystallization. To better understand the detailed nanoscale changes of the glass structure, ³¹P-³¹P DQ-DRENAR homonuclear correlation experiments have been carried out, revealing the gradual segregation of P atoms associated with the formation of disordered Li₃PO₄. Small-angle neutron scattering data also show the apparition of nanoscale heterogeneities associated with Li₃PO₄ species upon heating treatments and allow the determination of their average sizes. These new structural information enhance our understanding of the role of P in nucleation mechanisms. Nucleation is initiated by gradual change in P environment implying P segregation upon heating treatments, forming disordered Li₃PO₄ heterogeneities. The segregation of P atoms enables the precipitation of meta- and disilicate phases.