Microbial growth,communities and sensory characteristics of vacuum and modified atmosphere packaged lamb shoulders

Packaging fresh lamb in a vacuum (VAC) versus a 100% CO₂ modified atmosphere (MAP) may influence product shelf-life and the bacterial communities. While VAC is a common packing method and 100% CO₂ MAP is used in some countries, there is little information about how these different techniques affect the growth of spoilage bacteria and sensory attributes of lamb. The aim of this study was to assess changes in microbiological and organoleptic properties, and determine differences in microbial communities by terminal restriction fragment length polymorphism (TRFLP) and 454 pyrosequencing, in bone-in (BI) and bone-out (BO) MAP- and VAC-packed lamb shoulders stored at −0.3 °C over 12 wk. VAC and MAP lamb shoulders were acceptable in sensory test scores over 12 wk of storage at −0.3 °C, despite total viable count (TVC) and lactic acid bacteria (LAB) levels increasing to 8 log₁₀ CFU/cm² for VAC lamb and 4–6 log₁₀ CFU/cm² for MAP lamb. Similar to the sensory results, there were no significant differences in microbial communities between BI and BO product. However, types of bacteria were different between VAC and MAP packaging. Specifically, while VAC shoulder became dominated by Carnobacterium spp. in the middle of the storage period, the MAP shoulder microbial population remained similar from the start until later storage times.     

Modeling of a membrane reactor system for crude palm oil transesterification. Part II: Transport phenomena

The mechanistic modeling of biodiesel production process in membrane reactor with the consideration of chemical reaction, phase equilibrium, and ultrafiltration is important for the membrane reactor design. In part II of this work, the chemical and phase equilibrium (CPE) model for crude palm oil transesterification reaction in the membrane reactor developed in part I is extended to an integration of CPE with modified Maxwell–Stefan model, which considers multicomponent mass transport phenomena of concentration polarization and intramembrane. A good fit of simulated permeate fluxes and apparent solute rejection to the experimental data shows that the model has a good prediction capability. Reversible fouling was found to be the major fouling and no pore plugging was observed. Simulation results verified that micelles were retained by the membrane at CPO:MEOH molar ratio of 1:24 and catalyst concentration of 0.5 wt %. However, phase inversion happened when catalyst concentration of 0.05 and 0.1 wt % were used. © 2015 American Institute of Chemical Engineers AIChE J, 61: 1981–1996, 2015     

Passive 350 GHz Video Imaging Systems for Security Applications

Journal of Infrared, Millimeter, and Terahertz Waves - Passive submillimeter-wave imaging is a concept that has been in the focus of interest as a promising technology for personal security...     

Applying direct digital control

One particular aspect of a wide range of HVAC research at the US Center for Building Technology concerned interfacing DDC with the pneumatic system for one of the existing air handling units at the CBT building itself. Using solenoid air valves induced both positive and negative air leaks in the pneumatic system; this did not occur with motorised pressure regulators, though these produced a time delay whenever the regulator's direction of rotation was reversed. Details are given of an adaptive PI algorithm with a self‐tuning regulator approach, developed at CBT and implemented on the air handler in question. From the experience, it is strongly recommended that such an algorithm should be implemented on a positional basis.     

Separation of He/N2/CH4 ternary mixtures by a triple-reflux pressure swing adsorption process

Conventional pressure swing adsorption (PSA) processes can only produce one high purity product in a single stage, whereas the state-of-art dual-reflux PSA (DR-PSA) can produce two high purity products simultaneously. However, multicomponent gas separation is often required in the industry, targeting at recovering several valued products at the same time. In this study, we propose a novel adsorption process, namely triple-reflux PSA (TR-PSA), to separate three components simultaneously. A middle product outlet and a middle reflux stream were introduced to the adsorption columns of a conventional DR-PSA process to separate ternary mixtures of nitrogen, methane, and helium. Nonisothermal dynamic models were built to investigate the impacts of operating parameters particularly the location of the middle reflux/product stream and the middle reflux flow rates. Results showed that the TR-PSA process successfully separated ternary mixtures obtaining three enriched products simultaneously in a single stage, yielding a separation performance comparable to that of the double-stage DR-PSA with significantly lower capital and energy cost.     

Effect of coupling agent content on properties of composites made from polylactic acid and chrysanthemum waste

Chrysanthemum flower is among one of the highly sought after and widely planted flower crops, in particular for cultural and religious ceremonies. However, the chrysanthemum stem and stalk have little value and usually discard as by‐product waste from floristry. The objective of this research is to investigate the potential value of utilizing chrysanthemum stem and stalk as reinforcing fillers for thermoplastic composites. In this study, 2‐mm thick composite sheet containing predefined formulations of polylactic acid (PLA), chrysanthemum waste filler (CWF) ranging from 15 to 60 phr, and maleated polyethylene (MAPE) coupling agent up to 5 phr were prepared with the aid of Haake internal mixer and compression molding. The effect of MAPE loading on tensile, thermal, and morphological properties of PLA/CWF composites was investigated. The findings revealed that PLA/CWF composite attained improved tensile modulus compared to the neat PLA, and the tensile modulus increases with higher concentration of CWF. However, both tensile strength and elongation at break reduces with increase loading of CWF. Overall, PLA/CWF composites with MAPE shows better performance compared to those without MAPE, where an optimum strength of 21.8 MPa can be achieved with 60 phr CW and 3 phr MAPE. The measured tensile strength is comparable to alternatives natural fiber thermoplastic composites demonstrating its potential to be used in non‐structurally demanding application. J. VINYL ADDIT. TECHNOL., 26:10–16, 2020. © 2019 Society of Plastics Engineers     

Consumption of fish from a contaminated lake strongly affects the concentrations of polybrominated diphenyl ethers and hexabromocyclododecane in serum

Very high concentrations of polybrominated diphenyl ethers (PBDE) have been reported in fish from Lake Mj?sa in Norway. This study was performed to examine the serum concentrations of PBDE and hexabromocyclododecane (HBCD) in consumers of fish from this lake and to investigate possible relationships between serum concentrations, self-reported fish intake and calculated total dietary PBDE exposure. Serum concentrations of the sum of the seven PBDE (BDE-28, 47, 99, 100, 153, 154 and 183) were significantly higher than those of a reference group of Norwegians eating only food with background levels of contamination (medians: 18 ng/g lipids men, 8.4 ng/g lipids women). The median dietary intake of Sum 7 PBDE was 2549 ng/day (30 ng/kg body weight/day), the highest dietary intake of PBDE reported. The contribution from fish caught from the contaminated lake comprised 98.7% of the total dietary exposure. For men, serum levels of PBDE were strongly correlated with the calculated dietary exposure, except for BDE-209. This suggests that sources other than the diet are important for human BDE-209 exposure. The median serum HBCD concentration was 4.1 and 2.6 ng/g lipids for men and women, respectively, and was also found to be associated with consumption of fish from Lake Mj?sa.     

Probability distributions of gas hydrate formation

Induction time distributions for gas hydrate formation were measured for gas mixtures of methane + propane at pressures up to 11.3 MPa using a high‐pressure automated lag time apparatus (HP‐ALTA). Measurements were made at subcooling temperatures between 4.3 and 13.5 K and, while isothermal induction times between 0 and 15,000 s were observed, the median isothermal induction times for the distributions ranged from 100 to 4000 s. A hyperbolic relationship between median induction time and subcooling was used to correlate the data. A graphical interpretation is presented that relates the two types of data that can be acquired by using the HP‐ALTA in one of two modes to study hydrate formation: induction time distributions at constant subcooling and formation temperature distributions observed during linear cooling ramps. The equivalence of these two modes provides a robust method for studying the variation of formation phenomena in different hydrate systems. © 2013 American Institute of Chemical Engineers AIChE J, 59: 2640–2646, 2013     

Simultaneous quantification of free fatty acids,free sterols,squalene, and acylglycerol molecular species in palm oil by high-temperature gas chromatography-flame ionization detection

This paper discusses a rapid GC-FID technique for the simultaneous quantitative analysis of FFA, MAG, DAG, TAG, sterols, and squalene in vegetable oils, with special reference to palm oil. The FFA content determined had a lower SE compared with a conventional titrimetric method. Squalene and individual sterols, consisting of β-sitosterol, stigmasterol, campesterol, and cholesterol, were accurately quantified without any losses. This was achieved through elimination of tedious conventional sample pretreatments, such as saponification and preparative TLC. With this technique, the separation of individual MAG, consisting of 16∶0, 18∶0, and 18∶1 FA, and the DAG species, consisting of the 1,2(2,3)- and 1,3-positions, was sufficient to enable their quantification. This technique enabled the TAG to be determined according to their carbon numbers in the range of C₄₄ to C₅₆. Comparisons were made with conventional methods, and the results were in good agreement with those reported in the literature.