Concomitant treatment with mild hyperthermia, cisplatin and low dose-rate irradiation in human ovarian cancer cells sensitive and resistant to cisplatin

Hyperthermia has been shown to be an effective radiation sensitizer. Cisplatin has also been shown to cause radiosensitization. In part, the sensitization is through the inhibition of repair of radiation damage. In this study we have set out to combine low dose-rate irradiation (during which extensive repair occurs) with both cisplatin and hyperthermia to maximize the radiation sensitizing effect. Two human ovarian carcinoma cell lines, one parental (A2780S) and the other a cisplatin resistant derivative (A2780CP) cell line were used in these experiments. Long duration hyperthermia at 40 degrees C was combined with low concentrations of cisplatin (0.5-3 microg/ml) and low dose-rate irradiation (LDRI). The responses to the individual treatments showed that there was cross resistance in the two cell lines for cisplatin and radiation, but for hyperthermia the opposite effect was found. When all treatments were given concurrently the response was greater than the calculated response of all three individual treatments, indicating a synergistic interaction. The effect was greater in the cisplatin resistant cell line. The combination of mild hyperthermia, low dose cisplatin and LDRI are a good combination for potential clinical application. In addition, this could be a good approach to deal with cisplatin resistance.     

Molecular typing of Borrelia burgdorferi from Lyme disease patients by PCR-restriction fragment length polymorphism analysis

Ninety-three Borrelia burgdorferi isolates obtained from erythema migrans lesions or blood of Lyme disease patients in Westchester County, N.Y., between 1991 and 1994 were characterized by PCR-restriction fragment length polymorphism (PCR-RFLP) analysis of the 16S-23S rRNA gene spacer. All isolates could be classified into three distinct RFLP types. Among the 82 skin biopsy isolates studied, 21 (25.6%) were type 1, 37 (45.1%) were type 2, and 21 (25.6%) were type 3. Three (3.7%) cultures contained a mixture of two isolates with distinct RFLP types. The 11 isolates cultured from blood showed a similar predominance of RFLP type 2 (6 of 11; 54.5%) relative to types 1 (2 of 11; 18.2%) and 3 (3 of 11; 27.3%). For one patient both skin and blood isolates were cultured, and RFLP analysis revealed that these isolates differed from one another. This study demonstrates that there is genotypic heterogeneity in B. burgdorferi strains infecting Lyme disease patients, and this typing approach may allow differentiation of isolates with various degrees of pathogenic potential.     

Gunshot injuries in infants and children in KwaZulu-Natal--an emerging epidemic?

AIM: To report the quantitation of the lipid composition of a corneal button from a Japanese woman in her 60s with clinically and histopathologically proved Schnyder's corneal dystrophy. METHODS: Total lipids extracted from the corneal button of the patient were analysed by the method of thin layer chromatography flame ionisation detection. Two different solvent systems were used for neutral lipid analysis and phospholipid analysis. Results were compared with three age matched corneal buttons obtained from cadaveric eyes. RESULTS: The lipids that accumulated in the cornea in Schnyder's dystrophy consisted mainly of unesterified cholesterol and phospholipids. The analysis of phospholipids showed sphingomyelin to be the predominant phospholipid in the patient's cornea. CONCLUSION: Findings suggest that this disorder involves a disturbance of the metabolism of cholesterol and/or sphingomyelin metabolism that is limited to the cornea.     

Urokinase and the intestinal mucosa: evidence for a role in epithelial cell turnover

The enzyme nitric oxide synthase catalyzes the oxidation of the amino acid L-arginine to L-citrulline and nitric oxide in an NADPH-dependent reaction. Nitric oxide plays a critical role in signal transduction pathways in the cardiovascular and nervous systems and is a key component of the cytostatic/cytotoxic function of the immune system. Characterization of nitric oxide synthase substrates and cofactors has outlined the broad details of the overall reaction and suggested possibilities for chemical steps in the reaction; however, the molecular details of the reaction mechanism are still poorly understood. Recent evidence suggests a role for the reduced bound pterin in the first step of the reaction--the hydroxylation of L-arginine.     

On the influence of Si−Ge additions on the aging response of Al−Cu

Al−Cu−Si−Ge alloys display a unique combination of ultrarapid aging response, high peak hardness, and extended-aging microstructural stability. The purpose of this work is to explain these properties in terms of the role that the Si−Ge additions have on modifying the conventional Al−Cu aging sequence. In both AlCu and AlCuSiGe, the room-temperature microstructure consists of both Guinier-Preston (GP) zones and ϕ″ precipitates. Upon aging at 190°C, Al−Cu displays the well-known precipitation sequence: the slow dissolution of GP zones and ϕ″ and the gradual formation of ϕ′. In the quaternary alloy, Si−Ge particles quickly nucleate and grow during elevated-temperature aging (they are detected after as little as 30 minutes at 190 °C). The Si−Ge particles then act as nucleation sites for ϕ′ precipitates, resulting in a peak-aged microstructure consisting of a dense distribution of ϕ′ attached to Si−Ge. DAVID MITLIN, Postdoctoral Fellow, formerly with the Materials Science Department, University of California-Berkeley and the Lawrence Berkeley National Laboratory.     

Restoration of pedicle screw fixation with an in situ setting calcium phosphate cement

STUDY DESIGN: Pedicle screws were pulled out of human cadaveric vertebrae before and after augmentation with polymethylmethacrylate or in situ-setting calcium phosphate cement. The fixation strength of screws augmented with calcium phosphate cement was compared with that of screws augmented with polymethylmethacrylate. OBJECTIVES: To determine whether a new in situ-setting calcium phosphate cement might be suitable for augmenting the fixation of pedicle screws. The principle objective was to compare the pull-out resistance of screws augmented with calcium phosphate cement with the pull-out behavior of screws augmented with polymethylmethacrylate. Polymethylmethacrylate augmentation was chosen as the standard because of its current clinical use. Five types of screws were tested to determine whether screw design had an effect on the efficacy of augmentation. SUMMARY OF BACKGROUND DATA: Although many factors affect the pull-out resistance of pedicle screws, a key determinant of their performance is the strength of their attachment to the spine. In elderly, osteopenic patients, the screw-bone interface is especially at risk for stripping during insertion or pull-out after surgery. In these patients, polymethylmethacrylate has been used to augment pedicle screw fixation, although its use is not without risk. In situ-setting calcium phosphate cements may provide an alternative to polymethylmethacrylate in this application. Like polymethylmethacrylate, calcium phosphate cements can be injected into the prepared screw hole. They have the added advantage of being resorbed and replaced during healing and normal bone remodeling. METHODS: Thirty human lower lumbar vertebrae (L3-L5) were implanted bilaterally with one of five types of pedicle screws (n = 6 for each screw type). The screws were pulled out 3.0 mm at 0.25 mm/sec with a servohydraulic materials testing machine. The 3.0-mm pull-out distance, which was slightly longer than one thread pitch, was designed to strip the screw-bone interface but to leave the pedicle otherwise intact. After the initial testing, the screws in each vertebrae were removed, and the screw tracks were filled with 2.0 cc of polymethylmethacrylate (one side) or calcium phosphate cement (contralateral side). After augmentation, the screws were reinserted, and the cements were allowed to harden for 24 hours. Postaugmentation testing followed the protocols for preaugmentation testing, and the pull-out resistance of screws augmented with calcium phosphate cement was compared with the pull-out resistance of screws augmented with polymethylmethacrylate. RESULTS: Mechanically, calcium phosphate cement compared favorably with polymethylmethacrylate for augmenting pedicle screws. Both restored the strength of the screw-bone interface: across all screw types, the average increase in pull-out strength was 147% with polymethylmethacrylate augmentation and 102% with calcium phosphate cement. There were no significant differences because of screw type with either type of augmentation. CONCLUSIONS: The in situ-setting calcium phosphate cement investigated in this study compared favorably with polymethylmethacrylate in a single-cycle, pull-out test of augmented pedicle screws in senile trabecular bone. With further evaluation, this cement may offer an alternative to polymethylmethacrylate for the enhancement of pedicle screw fixation clinically.     

In vitro selection of dopamine RNA ligands

RNA aptamers that specifically bind dopamine have been isolated by in vitro selection from a pool of 3.4 x 10(14) different RNA molecules. One aptamer (dopa2), which dominated the selected pool, has been characterized and binds to the dopamine affinity column with a dissociation constant of 2.8 microM. The specificity of binding has been determined by studying binding properties of a number of dopamine-related molecules, showing that the interaction with the RNA might be mediated by the hydroxyl group at position 3 and the proximal aliphatic chain in the dopamine molecule. The binding domain was initially localized by boundary experiments. Further definition of the dopamine binding site was obtained by secondary selection on a pool of sequences derived from a partial randomization of the dopa2 molecule. Sequence comparison of a large panel of selected variants revealed a structural consensus motif among the active aptamers. The dopamine binding pocket is built up by a tertiary interaction between two stem and loop motifs, creating a stable framework in which five invariant nucleotides are precisely arrayed. Minimal active sequence and key nucleotides have been confirmed by the design of small functional aptamers and mutational analysis. Enzymatic probing suggests that the RNA might undergo a conformational change upon ligand binding that stabilizes the proposed tertiary structure.